initial commit

component/screen/Include/lcd.h

@@ -0,0 +1,81 @@
+#ifndef _LCD_H
+#define _LCD_H
+
+#include <stdint.h>
+#include <stddef.h>
+
+#define USE_HORIZONTAL 2 //设置横屏或者竖屏显示 0或1为竖屏 2或3为横屏
+#if USE_HORIZONTAL == 0 || USE_HORIZONTAL == 1
+#define LCD_W 80
+#define LCD_H 160
+#else
+#define LCD_W 160
+#define LCD_H 80
+#endif
+
+#define OLED_SCLK_Clr()
+#define OLED_SCLK_Set()
+
+#define OLED_SDIN_Clr()
+#define OLED_SDIN_Set()
+
+#define OLED_CS_Clr() gpio_bit_reset(GPIOB, GPIO_PIN_2) //CS PB2
+#define OLED_CS_Set() gpio_bit_set(GPIOB, GPIO_PIN_2)
+
+#define OLED_RST_Clr() gpio_bit_reset(GPIOB, GPIO_PIN_1) //RES PB1
+#define OLED_RST_Set() gpio_bit_set(GPIOB, GPIO_PIN_1)
+
+#define OLED_DC_Clr() gpio_bit_reset(GPIOB, GPIO_PIN_0) //DC PB0
+#define OLED_DC_Set() gpio_bit_set(GPIOB, GPIO_PIN_0)
+
+#define OLED_BLK_Clr()
+#define OLED_BLK_Set()
+
+void LCD_Writ_Bus(uint8_t dat);
+void LCD_WR_DATA8(uint8_t dat);
+void LCD_WR_DATA(uint16_t dat);
+void LCD_WR_REG(uint8_t dat);
+void LCD_Address_Set(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
+void LCD_Init(void);
+void LCD_Clear(uint16_t Color);
+void LCD_SetBackgroundColor(uint16_t color);
+void LCD_DrawPoint(uint16_t x, uint16_t y, uint16_t color);
+void LCD_Fill(uint16_t xsta, uint16_t ysta, uint16_t xend, uint16_t yend, uint16_t color);
+void LCD_DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color);
+void LCD_DrawRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color);
+void LCD_DrawCircle(uint16_t x0, uint16_t y0, uint8_t r, uint16_t color);
+void LCD_ShowChar(uint16_t x, uint16_t y, uint8_t num, uint8_t mode, uint16_t color);
+void LCD_ShowString(uint16_t x, uint16_t y, const uint8_t *p, uint16_t color);
+void LCD_ShowNum(uint16_t x, uint16_t y, uint16_t num, uint8_t len, uint16_t color);
+void LCD_ShowFloat(uint16_t x, uint16_t y, float num, uint8_t len, uint16_t color);
+void LCD_ShowImage(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, const uint8_t *const image, size_t image_byte_count);
+
+//画笔颜色
+#define WHITE 0xFFFF
+#define BLACK 0x0000
+#define BLUE 0x001F
+#define BRED 0XF81F
+#define GRED 0XFFE0
+#define GBLUE 0X07FF
+#define RED 0xF800
+#define MAGENTA 0xF81F
+#define GREEN 0x07E0
+#define CYAN 0x7FFF
+#define YELLOW 0xFFE0
+#define BROWN 0XBC40 //棕色
+#define BRRED 0XFC07 //棕红色
+#define GRAY 0X8430  //灰色
+//GUI颜色
+
+#define DARKBLUE 0X01CF  //深蓝色
+#define LIGHTBLUE 0X7D7C //浅蓝色
+#define GRAYBLUE 0X5458  //灰蓝色
+//以上三色为PANEL的颜色
+
+#define LIGHTGREEN 0X841F //浅绿色
+#define LGRAY 0XC618      //浅灰色(PANNEL),窗体背景色
+
+#define LGRAYBLUE 0XA651 //浅灰蓝色(中间层颜色)
+#define LBBLUE 0X2B12    //浅棕蓝色(选择条目的反色)
+
+#endif