initial commit
This commit is contained in:
shell committed
commit
b44ce7bd77
2716 files changed
+559005
No files matched your search
+233
@@ -0,0 +1,233 @@
|
||||
/*
|
||||
** ###################################################################
|
||||
** Processors: LPC55S69JBD100_cm33_core0
|
||||
** LPC55S69JBD64_cm33_core0
|
||||
** LPC55S69JEV98_cm33_core0
|
||||
**
|
||||
** Compiler: GNU C Compiler
|
||||
** Reference manual: LPC55S6x/LPC55S2x/LPC552x User manual(UM11126) Rev.1.3 16 May 2019
|
||||
** Version: rev. 1.1, 2019-05-16
|
||||
** Build: b191008
|
||||
**
|
||||
** Abstract:
|
||||
** Linker file for the GNU C Compiler
|
||||
**
|
||||
** Copyright 2016 Freescale Semiconductor, Inc.
|
||||
** Copyright 2016-2019 NXP
|
||||
** All rights reserved.
|
||||
**
|
||||
** SPDX-License-Identifier: BSD-3-Clause
|
||||
**
|
||||
** http: www.nxp.com
|
||||
** mail: support@nxp.com
|
||||
**
|
||||
** ###################################################################
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400;
|
||||
STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0800;
|
||||
RPMSG_SHMEM_SIZE = DEFINED(__use_shmem__) ? 0x1800 : 0;
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
m_interrupts (RX) : ORIGIN = 0x00010000, LENGTH = 0x00000200
|
||||
m_text (RX) : ORIGIN = 0x00010200, LENGTH = 0x0007FE00
|
||||
m_core1_image (RX) : ORIGIN = 0x00090000, LENGTH = 0x00008000
|
||||
m_data (RW) : ORIGIN = 0x20000000, LENGTH = 0x00033000 - RPMSG_SHMEM_SIZE
|
||||
rpmsg_sh_mem (RW) : ORIGIN = 0x20033000 - RPMSG_SHMEM_SIZE, LENGTH = RPMSG_SHMEM_SIZE
|
||||
m_usb_sram (RW) : ORIGIN = 0x40100000, LENGTH = 0x00004000
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* section for storing the secondary core image */
|
||||
.m0code :
|
||||
{
|
||||
. = ALIGN(4) ;
|
||||
KEEP (*(.m0code))
|
||||
*(.m0code*)
|
||||
. = ALIGN(4) ;
|
||||
} > m_core1_image
|
||||
|
||||
/* NOINIT section for rpmsg_sh_mem */
|
||||
.noinit_rpmsg_sh_mem (NOLOAD) : ALIGN(4)
|
||||
{
|
||||
__RPMSG_SH_MEM_START__ = .;
|
||||
*(.noinit.$rpmsg_sh_mem*)
|
||||
. = ALIGN(4) ;
|
||||
__RPMSG_SH_MEM_END__ = .;
|
||||
} > rpmsg_sh_mem
|
||||
|
||||
/* The startup code goes first into internal flash */
|
||||
.interrupts :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} > m_interrupts
|
||||
|
||||
/* The program code and other data goes into internal flash */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
. = ALIGN(4);
|
||||
} > m_text
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
} > m_text
|
||||
|
||||
.ARM :
|
||||
{
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} > m_text
|
||||
|
||||
.ctors :
|
||||
{
|
||||
__CTOR_LIST__ = .;
|
||||
/* gcc uses crtbegin.o to find the start of
|
||||
the constructors, so we make sure it is
|
||||
first. Because this is a wildcard, it
|
||||
doesn't matter if the user does not
|
||||
actually link against crtbegin.o; the
|
||||
linker won't look for a file to match a
|
||||
wildcard. The wildcard also means that it
|
||||
doesn't matter which directory crtbegin.o
|
||||
is in. */
|
||||
KEEP (*crtbegin.o(.ctors))
|
||||
KEEP (*crtbegin?.o(.ctors))
|
||||
/* We don't want to include the .ctor section from
|
||||
from the crtend.o file until after the sorted ctors.
|
||||
The .ctor section from the crtend file contains the
|
||||
end of ctors marker and it must be last */
|
||||
KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors))
|
||||
KEEP (*(SORT(.ctors.*)))
|
||||
KEEP (*(.ctors))
|
||||
__CTOR_END__ = .;
|
||||
} > m_text
|
||||
|
||||
.dtors :
|
||||
{
|
||||
__DTOR_LIST__ = .;
|
||||
KEEP (*crtbegin.o(.dtors))
|
||||
KEEP (*crtbegin?.o(.dtors))
|
||||
KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors))
|
||||
KEEP (*(SORT(.dtors.*)))
|
||||
KEEP (*(.dtors))
|
||||
__DTOR_END__ = .;
|
||||
} > m_text
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} > m_text
|
||||
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} > m_text
|
||||
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} > m_text
|
||||
|
||||
__etext = .; /* define a global symbol at end of code */
|
||||
__DATA_ROM = .; /* Symbol is used by startup for data initialization */
|
||||
|
||||
.data : AT(__DATA_ROM)
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__DATA_RAM = .;
|
||||
__data_start__ = .; /* create a global symbol at data start */
|
||||
*(.ramfunc*) /* for functions in ram */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
KEEP(*(.jcr*))
|
||||
. = ALIGN(4);
|
||||
__data_end__ = .; /* define a global symbol at data end */
|
||||
} > m_data
|
||||
|
||||
__DATA_END = __DATA_ROM + (__data_end__ - __data_start__);
|
||||
text_end = ORIGIN(m_text) + LENGTH(m_text);
|
||||
ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data")
|
||||
|
||||
/* Uninitialized data section */
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
. = ALIGN(4);
|
||||
__START_BSS = .;
|
||||
__bss_start__ = .;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
__bss_end__ = .;
|
||||
__END_BSS = .;
|
||||
} > m_data
|
||||
|
||||
.heap :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
__end__ = .;
|
||||
PROVIDE(end = .);
|
||||
__HeapBase = .;
|
||||
. += HEAP_SIZE;
|
||||
__HeapLimit = .;
|
||||
__heap_limit = .; /* Add for _sbrk */
|
||||
} > m_data
|
||||
|
||||
.stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
. += STACK_SIZE;
|
||||
} > m_data
|
||||
|
||||
m_usb_bdt (NOLOAD) :
|
||||
{
|
||||
. = ALIGN(512);
|
||||
*(m_usb_bdt)
|
||||
} > m_usb_sram
|
||||
|
||||
m_usb_global (NOLOAD) :
|
||||
{
|
||||
*(m_usb_global)
|
||||
} > m_usb_sram
|
||||
|
||||
/* Initializes stack on the end of block */
|
||||
__StackTop = ORIGIN(m_data) + LENGTH(m_data);
|
||||
__StackLimit = __StackTop - STACK_SIZE;
|
||||
PROVIDE(__stack = __StackTop);
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
|
||||
ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap")
|
||||
}
|
||||
@@ -0,0 +1,14 @@
|
||||
set(MCU_VARIANT LPC55S69)
|
||||
set(MCU_CORE LPC55S69_cm33_core0)
|
||||
|
||||
set(JLINK_DEVICE LPC55S69)
|
||||
set(PYOCD_TARGET LPC55S69)
|
||||
set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69)
|
||||
|
||||
set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/LPC55S69_cm33_core0_uf2.ld)
|
||||
|
||||
function(update_board TARGET)
|
||||
target_compile_definitions(${TARGET} PUBLIC
|
||||
CPU_LPC55S69JBD100_cm33_core0
|
||||
)
|
||||
endfunction()
|
||||
@@ -0,0 +1,59 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
/* metadata:
|
||||
name: Double M33 Express
|
||||
url: https://www.crowdsupply.com/steiert-solutions/double-m33-express
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// LED
|
||||
#define LED_PORT BOARD_INITLEDSPINS_LED_PORT
|
||||
#define LED_PIN BOARD_INITLEDSPINS_LED_PIN
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
// WAKE button
|
||||
#define BUTTON_PORT BOARD_INITBUTTONSPINS_S1_PORT
|
||||
#define BUTTON_PIN BOARD_INITBUTTONSPINS_S1_PIN
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
// UART
|
||||
#define UART_DEV USART0
|
||||
|
||||
// XTAL
|
||||
#define XTAL0_CLK_HZ (16 * 1000 * 1000U)
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,19 @@
|
||||
MCU_VARIANT = LPC55S69
|
||||
MCU_CORE = LPC55S69_cm33_core0
|
||||
RHPORT_DEVICE ?= 1
|
||||
|
||||
CFLAGS += -DCPU_LPC55S69JBD100_cm33_core0
|
||||
LD_FILE = $(BOARD_PATH)/LPC55S69_cm33_core0_uf2.ld
|
||||
|
||||
SRC_C += \
|
||||
$(TOP)/$(BOARD_PATH)/board/clock_config.c \
|
||||
$(TOP)/$(BOARD_PATH)/board/pin_mux.c \
|
||||
$(TOP)/$(BOARD_PATH)/board/peripherals.c
|
||||
|
||||
INC += $(TOP)/$(BOARD_PATH)/board
|
||||
|
||||
JLINK_DEVICE = LPC55S69
|
||||
PYOCD_TARGET = LPC55S69
|
||||
|
||||
# flash using pyocd
|
||||
flash: flash-pyocd
|
||||
+328
@@ -0,0 +1,328 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
/*
|
||||
* How to set up clock using clock driver functions:
|
||||
*
|
||||
* 1. Setup clock sources.
|
||||
*
|
||||
* 2. Set up wait states of the flash.
|
||||
*
|
||||
* 3. Set up all dividers.
|
||||
*
|
||||
* 4. Set up all selectors to provide selected clocks.
|
||||
*/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Clocks v18.0
|
||||
processor: LPC55S69
|
||||
package_id: LPC55S69JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S69
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_power.h"
|
||||
#include "fsl_clock.h"
|
||||
#include "clock_config.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
void BOARD_InitBootClocks(void)
|
||||
{
|
||||
BOARD_BootClockPLL150M();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockFRO12M **********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockFRO12M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 12 MHz}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockFRO12M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************* Configuration BOARD_BootClockFROHF96M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockFROHF96M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 96 MHz}
|
||||
settings:
|
||||
- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable}
|
||||
- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk}
|
||||
sources:
|
||||
- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockFROHF96M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */
|
||||
|
||||
POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL100M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockPLL100M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 100 MHz}
|
||||
settings:
|
||||
- {id: PLL0_Mode, value: Normal}
|
||||
- {id: ENABLE_CLKIN_ENA, value: Enabled}
|
||||
- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled}
|
||||
- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS}
|
||||
- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true}
|
||||
- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true}
|
||||
- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true}
|
||||
sources:
|
||||
- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockPLL100M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
/*!< Configure XTAL32M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */
|
||||
CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */
|
||||
SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */
|
||||
|
||||
POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up PLL */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG);
|
||||
const pll_setup_t pll0Setup = {
|
||||
.pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U),
|
||||
.pllndec = SYSCON_PLL0NDEC_NDIV(4U),
|
||||
.pllpdec = SYSCON_PLL0PDEC_PDIV(2U),
|
||||
.pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)},
|
||||
.pllRate = 100000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL150M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockPLL150M
|
||||
called_from_default_init: true
|
||||
outputs:
|
||||
- {id: FXCOM0_clock.outFreq, value: 48 MHz}
|
||||
- {id: System_clock.outFreq, value: 144 MHz}
|
||||
- {id: USB0_clock.outFreq, value: 48 MHz}
|
||||
- {id: USB1_PHY_clock.outFreq, value: 16 MHz}
|
||||
settings:
|
||||
- {id: PLL0_Mode, value: Normal}
|
||||
- {id: PLL1_Mode, value: Normal}
|
||||
- {id: ENABLE_CLKIN_ENA, value: Enabled}
|
||||
- {id: ENABLE_PLL_USB_OUT, value: Enabled}
|
||||
- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled}
|
||||
- {id: SYSCON.FCCLKSEL0.sel, value: SYSCON.PLL0DIV}
|
||||
- {id: SYSCON.FRGCTRL0_DIV.scale, value: '400'}
|
||||
- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL1_BYPASS}
|
||||
- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL0DIV.scale, value: '2'}
|
||||
- {id: SYSCON.PLL0M_MULT.scale, value: '150', locked: true}
|
||||
- {id: SYSCON.PLL0N_DIV.scale, value: '8', locked: true}
|
||||
- {id: SYSCON.PLL0_PDEC.scale, value: '2', locked: true}
|
||||
- {id: SYSCON.PLL1CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL1M_MULT.scale, value: '18'}
|
||||
- {id: SYSCON.PLL1_PDEC.scale, value: '2'}
|
||||
- {id: SYSCON.USB0CLKDIV.scale, value: '3'}
|
||||
- {id: SYSCON.USB0CLKSEL.sel, value: SYSCON.MAINCLKSELB}
|
||||
sources:
|
||||
- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockPLL150M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
/*!< Configure XTAL32M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */
|
||||
CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */
|
||||
SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_PLL_USB_OUT_MASK; /* Enable clk_in to HS USB */
|
||||
|
||||
POWER_SetVoltageForFreq(144000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(144000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up PLL */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG);
|
||||
const pll_setup_t pll0Setup = {
|
||||
.pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(31U),
|
||||
.pllndec = SYSCON_PLL0NDEC_NDIV(8U),
|
||||
.pllpdec = SYSCON_PLL0PDEC_PDIV(1U),
|
||||
.pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(150U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)},
|
||||
.pllRate = 150000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */
|
||||
|
||||
/*!< Set up PLL1 */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL1); /*!< Switch PLL1CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL1); /* Ensure PLL is on */
|
||||
const pll_setup_t pll1Setup = {
|
||||
.pllctrl = SYSCON_PLL1CTRL_CLKEN_MASK | SYSCON_PLL1CTRL_SELI(11U) | SYSCON_PLL1CTRL_SELP(5U),
|
||||
.pllndec = SYSCON_PLL1NDEC_NDIV(1U),
|
||||
.pllpdec = SYSCON_PLL1PDEC_PDIV(1U),
|
||||
.pllmdec = SYSCON_PLL1MDEC_MDIV(18U),
|
||||
.pllRate = 144000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */
|
||||
|
||||
/*!< Set up dividers */
|
||||
#if FSL_CLOCK_DRIVER_VERSION >= MAKE_VERSION(2, 3, 4)
|
||||
CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 144U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */
|
||||
#else
|
||||
CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 37120U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */
|
||||
#endif
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 0U, true); /*!< Reset USB0CLKDIV divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 3U, false); /*!< Set USB0CLKDIV divider to value 3 */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 0U, true); /*!< Reset PLL0DIV divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 2U, false); /*!< Set PLL0DIV divider to value 2 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */
|
||||
CLOCK_AttachClk(kMAIN_CLK_to_USB0_CLK); /*!< Switch USB0_CLK to MAIN_CLK */
|
||||
CLOCK_AttachClk(kPLL0_DIV_to_FLEXCOMM0); /*!< Switch FLEXCOMM0 to PLL0_DIV */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
+290
@@ -0,0 +1,290 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _CLOCK_CONFIG_H_
|
||||
#define _CLOCK_CONFIG_H_
|
||||
|
||||
#include "fsl_common.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal frequency in Hz */
|
||||
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes default configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootClocks(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockFRO12M **********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKFRO12M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFRO12M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKFRO12M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockFRO12M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************* Configuration BOARD_BootClockFROHF96M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockFROHF96M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL100M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKPLL100M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL100M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTEM_CLOCK 100000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKPLL100M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKPLL100M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKPLL100M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL100M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockPLL100M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL150M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK 144000000U /*!< Core clock frequency: 144000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKPLL150M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM0_CLOCK 48000000UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL150M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTEM_CLOCK 144000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKPLL150M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKPLL150M_USB0_CLOCK 48000000UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKPLL150M_USB1_PHY_CLOCK 16000000UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL150M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockPLL150M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
#endif /* _CLOCK_CONFIG_H_ */
|
||||
+160
@@ -0,0 +1,160 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Peripherals v15.0
|
||||
processor: LPC55S69
|
||||
package_id: LPC55S69JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S69
|
||||
functionalGroups:
|
||||
- name: BOARD_InitPeripherals_cm33_core0
|
||||
UUID: 61d0725d-b300-49cb-9c66-b5edfbf8ffc1
|
||||
called_from_default_init: true
|
||||
selectedCore: cm33_core0
|
||||
- name: BOARD_InitPeripherals_cm33_core1
|
||||
UUID: e2041cd4-ebb6-45a5-807f-e0c2dc047d48
|
||||
selectedCore: cm33_core1
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'system'
|
||||
- type_id: 'system'
|
||||
- global_system_definitions:
|
||||
- user_definitions: ''
|
||||
- user_includes: ''
|
||||
- global_init: ''
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'uart_cmsis_common'
|
||||
- type_id: 'uart_cmsis_common'
|
||||
- global_USART_CMSIS_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'gpio_adapter_common'
|
||||
- type_id: 'gpio_adapter_common'
|
||||
- global_gpio_adapter_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "peripherals.h"
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitPeripherals_cm33_core0 functional group
|
||||
**********************************************************************************************************************/
|
||||
/***********************************************************************************************************************
|
||||
* DEBUG_UART initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'DEBUG_UART'
|
||||
- type: 'flexcomm_usart'
|
||||
- mode: 'polling'
|
||||
- custom_name_enabled: 'true'
|
||||
- type_id: 'flexcomm_usart_2.2.0'
|
||||
- functional_group: 'BOARD_InitPeripherals_cm33_core0'
|
||||
- peripheral: 'FLEXCOMM0'
|
||||
- config_sets:
|
||||
- usartConfig_t:
|
||||
- usartConfig:
|
||||
- clockSource: 'FXCOMFunctionClock'
|
||||
- clockSourceFreq: 'ClocksTool_DefaultInit'
|
||||
- baudRate_Bps: '115200'
|
||||
- syncMode: 'kUSART_SyncModeDisabled'
|
||||
- parityMode: 'kUSART_ParityDisabled'
|
||||
- stopBitCount: 'kUSART_OneStopBit'
|
||||
- bitCountPerChar: 'kUSART_8BitsPerChar'
|
||||
- loopback: 'false'
|
||||
- txWatermark: 'kUSART_TxFifo0'
|
||||
- rxWatermark: 'kUSART_RxFifo1'
|
||||
- enableRx: 'true'
|
||||
- enableTx: 'true'
|
||||
- clockPolarity: 'kUSART_RxSampleOnFallingEdge'
|
||||
- enableContinuousSCLK: 'false'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
const usart_config_t DEBUG_UART_config = {
|
||||
.baudRate_Bps = 115200UL,
|
||||
.syncMode = kUSART_SyncModeDisabled,
|
||||
.parityMode = kUSART_ParityDisabled,
|
||||
.stopBitCount = kUSART_OneStopBit,
|
||||
.bitCountPerChar = kUSART_8BitsPerChar,
|
||||
.loopback = false,
|
||||
.txWatermark = kUSART_TxFifo0,
|
||||
.rxWatermark = kUSART_RxFifo1,
|
||||
.enableRx = true,
|
||||
.enableTx = true,
|
||||
.enableMode32k = false,
|
||||
.clockPolarity = kUSART_RxSampleOnFallingEdge,
|
||||
.enableContinuousSCLK = false
|
||||
};
|
||||
|
||||
static void DEBUG_UART_init(void) {
|
||||
/* Reset FLEXCOMM device */
|
||||
RESET_PeripheralReset(kFC0_RST_SHIFT_RSTn);
|
||||
USART_Init(DEBUG_UART_PERIPHERAL, &DEBUG_UART_config, DEBUG_UART_CLOCK_SOURCE);
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* NVIC initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'NVIC'
|
||||
- type: 'nvic'
|
||||
- mode: 'general'
|
||||
- custom_name_enabled: 'false'
|
||||
- type_id: 'nvic'
|
||||
- functional_group: 'BOARD_InitPeripherals_cm33_core0'
|
||||
- peripheral: 'NVIC'
|
||||
- config_sets:
|
||||
- nvic:
|
||||
- interrupt_table: []
|
||||
- interrupts: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/* Empty initialization function (commented out)
|
||||
static void NVIC_init(void) {
|
||||
} */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitPeripherals_cm33_core0(void)
|
||||
{
|
||||
/* Initialize components */
|
||||
DEBUG_UART_init();
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void)
|
||||
{
|
||||
BOARD_InitPeripherals_cm33_core0();
|
||||
}
|
||||
+57
@@ -0,0 +1,57 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PERIPHERALS_H_
|
||||
#define _PERIPHERALS_H_
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_reset.h"
|
||||
#include "fsl_usart.h"
|
||||
#include "fsl_clock.h"
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Definitions
|
||||
**********************************************************************************************************************/
|
||||
/* Definitions for BOARD_InitPeripherals_cm33_core0 functional group */
|
||||
/* Definition of peripheral ID */
|
||||
#define DEBUG_UART_PERIPHERAL ((USART_Type *)FLEXCOMM0)
|
||||
/* Definition of the clock source frequency */
|
||||
#define DEBUG_UART_CLOCK_SOURCE 48000000UL
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Global variables
|
||||
**********************************************************************************************************************/
|
||||
extern const usart_config_t DEBUG_UART_config;
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
|
||||
void BOARD_InitPeripherals_cm33_core0(void);
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _PERIPHERALS_H_ */
|
||||
@@ -0,0 +1,736 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Pins v17.0
|
||||
processor: LPC55S69
|
||||
package_id: LPC55S69JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S69
|
||||
pin_labels:
|
||||
- {pin_num: '7', pin_signal: PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1, label: 'P18[2]/SD1_CLK', identifier: LED}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "fsl_iocon.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBootPins
|
||||
* Description : Calls initialization functions.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitBootPins(void)
|
||||
{
|
||||
BOARD_InitDEBUG_UARTPins();
|
||||
BOARD_InitUSBPins();
|
||||
BOARD_InitLEDsPins();
|
||||
BOARD_InitBUTTONsPins();
|
||||
BOARD_InitPins_Core0();
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitDEBUG_UARTPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitDEBUG_UARTPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitDEBUG_UARTPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t DEBUG_UART_RX = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, DEBUG_UART_RX);
|
||||
|
||||
const uint32_t DEBUG_UART_TX = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, DEBUG_UART_TX);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitSWD_DEBUGPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '13', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9, mode: pullDown,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '12', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '21', peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, identifier: DEBUG_SWD_SWO,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitSWD_DEBUGPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitSWD_DEBUGPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t DEBUG_SWD_SWO = (/* Pin is configured as SWO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is open (disabled) */
|
||||
IOCON_PIO_ASW_DI);
|
||||
/* PORT0 PIN10 (coords: 21) is configured as SWO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN, DEBUG_SWD_SWO);
|
||||
|
||||
if (Chip_GetVersion()==1)
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-down function */
|
||||
IOCON_PIO_MODE_PULLDOWN |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN11 (coords: 13) is configured as SWCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK);
|
||||
}
|
||||
else
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-down function */
|
||||
IOCON_PIO_MODE_PULLDOWN |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled), only for A0 version */
|
||||
IOCON_PIO_ASW_DIS_EN);
|
||||
/* PORT0 PIN11 (coords: 13) is configured as SWCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK);
|
||||
}
|
||||
|
||||
if (Chip_GetVersion()==1)
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN12 (coords: 12) is configured as SWDIO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO);
|
||||
}
|
||||
else
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled), only for A0 version */
|
||||
IOCON_PIO_ASW_DIS_EN);
|
||||
/* PORT0 PIN12 (coords: 12) is configured as SWDIO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO);
|
||||
}
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitUSBPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '97', peripheral: USBFSH, signal: USB_DP, pin_signal: USB0_DP}
|
||||
- {pin_num: '98', peripheral: USBFSH, signal: USB_DM, pin_signal: USB0_DM}
|
||||
- {pin_num: '78', peripheral: USBFSH, signal: USB_VBUS, pin_signal: PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '35', peripheral: USBHSH, signal: USB_DM, pin_signal: USB1_DM}
|
||||
- {pin_num: '34', peripheral: USBHSH, signal: USB_DP, pin_signal: USB1_DP}
|
||||
- {pin_num: '36', peripheral: USBHSH, signal: USB_VBUS, pin_signal: USB1_VBUS}
|
||||
- {pin_num: '65', peripheral: USBHSH, signal: USB_OVERCURRENTN, pin_signal: PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1, mode: pullUp}
|
||||
- {pin_num: '66', peripheral: USBFSH, signal: USB_OVERCURRENTN, pin_signal: PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28,
|
||||
mode: pullUp}
|
||||
- {pin_num: '67', peripheral: USBFSH, signal: USB_PORTPWRN, pin_signal: PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2, mode: pullUp}
|
||||
- {pin_num: '80', peripheral: USBHSH, signal: USB_PORTPWRN, pin_signal: PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2, mode: pullUp}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitUSBPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitUSBPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t USB0_VBUS = (/* Pin is configured as USB0_VBUS */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN22 (coords: 78) is configured as USB0_VBUS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITUSBPINS_USB0_VBUS_PORT, BOARD_INITUSBPINS_USB0_VBUS_PIN, USB0_VBUS);
|
||||
|
||||
IOCON->PIO[0][28] = ((IOCON->PIO[0][28] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT028 (pin 66) is configured as USB0_OVERCURRENTN. */
|
||||
| IOCON_PIO_FUNC(PIO0_28_FUNC_ALT7)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO0_28_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO0_28_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][12] = ((IOCON->PIO[1][12] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT112 (pin 67) is configured as USB0_PORTPWRN. */
|
||||
| IOCON_PIO_FUNC(PIO1_12_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_12_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_12_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][29] = ((IOCON->PIO[1][29] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT129 (pin 80) is configured as USB1_PORTPWRN. */
|
||||
| IOCON_PIO_FUNC(PIO1_29_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_29_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_29_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][30] = ((IOCON->PIO[1][30] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT130 (pin 65) is configured as USB1_OVERCURRENTN. */
|
||||
| IOCON_PIO_FUNC(PIO1_30_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_30_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_30_DIGIMODE_DIGITAL));
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitLEDsPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '7', peripheral: GPIO, signal: 'PIO0, 1', pin_signal: PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1, direction: OUTPUT}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitLEDsPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitLEDsPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO0 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio0);
|
||||
|
||||
gpio_pin_config_t LED_config = {
|
||||
.pinDirection = kGPIO_DigitalOutput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO0_1 (pin 7) */
|
||||
GPIO_PinInit(BOARD_INITLEDSPINS_LED_GPIO, BOARD_INITLEDSPINS_LED_PORT, BOARD_INITLEDSPINS_LED_PIN, &LED_config);
|
||||
|
||||
IOCON->PIO[0][1] = ((IOCON->PIO[0][1] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT01 (pin 7) is configured as PIO0_1. */
|
||||
| IOCON_PIO_FUNC(PIO0_1_FUNC_ALT0)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO0_1_DIGIMODE_DIGITAL));
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitBUTTONsPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '88', peripheral: GPIO, signal: 'PIO0, 5', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, direction: INPUT,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '32', peripheral: SYSCON, signal: RESET, pin_signal: RESETN}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBUTTONsPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitBUTTONsPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO0 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio0);
|
||||
|
||||
gpio_pin_config_t S1_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO0_5 (pin 88) */
|
||||
GPIO_PinInit(BOARD_INITBUTTONSPINS_S1_GPIO, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, &S1_config);
|
||||
|
||||
const uint32_t S1 = (/* Pin is configured as PIO0_5 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN5 (coords: 88) is configured as PIO0_5 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, S1);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitPins_Core0:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitPins_Core0
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitPins_Core0(void)
|
||||
{
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitI2SPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, mode: inactive, slew_rate: standard, invert: disabled,
|
||||
open_drain: disabled}
|
||||
- {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '21', peripheral: FLEXCOMM6, signal: SCK, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1,
|
||||
identifier: FC6_I2S_CLK, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '87', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitI2SPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitI2SPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t FC6_I2S_CLK = (/* Pin is configured as FC6_SCK */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN10 (coords: 21) is configured as FC6_SCK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_CLK_PORT, BOARD_INITI2SPINS_FC6_I2S_CLK_PIN, FC6_I2S_CLK);
|
||||
|
||||
const uint32_t FC7_I2S_WS = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_WS_PORT, BOARD_INITI2SPINS_FC7_I2S_WS_PIN, FC7_I2S_WS);
|
||||
|
||||
const uint32_t FC7_I2S_TX = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_TX_PORT, BOARD_INITI2SPINS_FC7_I2S_TX_PIN, FC7_I2S_TX);
|
||||
|
||||
const uint32_t FC7_I2S_SCK = (/* Pin is configured as FC7_SCK */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_SCK_PORT, BOARD_INITI2SPINS_FC7_I2S_SCK_PIN, FC7_I2S_SCK);
|
||||
|
||||
const uint32_t FC6_I2S_RX = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC2 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_RX_PORT, BOARD_INITI2SPINS_FC6_I2S_RX_PIN, FC6_I2S_RX);
|
||||
|
||||
const uint32_t FC6_I2S_WS = (/* Pin is configured as FC6_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC2 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN16 (coords: 87) is configured as FC6_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_WS_PORT, BOARD_INITI2SPINS_FC6_I2S_WS_PIN, FC6_I2S_WS);
|
||||
|
||||
const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SCL_PORT, BOARD_INITI2SPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL);
|
||||
|
||||
const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SDA_PORT, BOARD_INITI2SPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA);
|
||||
|
||||
const uint32_t MCLK = (/* Pin is configured as MCLK */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN31 (coords: 91) is configured as MCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_MCLK_PORT, BOARD_INITI2SPINS_MCLK_PIN, MCLK);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitACCELPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '58', peripheral: GPIO, signal: 'PIO1, 19', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF, direction: INPUT, mode: inactive,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitACCELPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitACCELPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO1 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio1);
|
||||
|
||||
gpio_pin_config_t ACCL_INTR_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_19 (pin 58) */
|
||||
GPIO_PinInit(BOARD_INITACCELPINS_ACCL_INTR_GPIO, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, &ACCL_INTR_config);
|
||||
|
||||
const uint32_t ACCL_INTR = (/* Pin is configured as PIO1_19 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is open (disabled) */
|
||||
IOCON_PIO_ASW_DI);
|
||||
/* PORT1 PIN19 (coords: 58) is configured as PIO1_19 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, ACCL_INTR);
|
||||
|
||||
const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SCL_PORT, BOARD_INITACCELPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL);
|
||||
|
||||
const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SDA_PORT, BOARD_INITACCELPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA);
|
||||
}
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
@@ -0,0 +1,383 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PIN_MUX_H_
|
||||
#define _PIN_MUX_H_
|
||||
|
||||
/*!
|
||||
* @addtogroup pin_mux
|
||||
* @{
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* API
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @brief Calls initialization functions.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootPins(void);
|
||||
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_29 (number 92), P8[2]/U6[13]/FC0_USART_RXD
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 29U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 29U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_30 (number 94), P8[3]/U6[12]/FC0_USART_TXD
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 30U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 30U)
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */
|
||||
#define IOCON_PIO_ASW_DIS_EN 0x00u /*!<@brief Analog switch is closed (enabled), only for A0 version */
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC6 0x06u /*!<@brief Selects pin function 6 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLDOWN 0x10u /*!<@brief Selects pull-down function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_11 (number 13), U14[4]/SWDCLK_TRGT
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 11U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 11U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_12 (number 12), U15[4]/D7/P7[2]/IF_SWDIO
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 12U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 12U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN 10U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN_MASK (1U << 10U)
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Enables digital function */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u
|
||||
/*!
|
||||
* @brief Selects pin function 7 */
|
||||
#define IOCON_PIO_FUNC7 0x07u
|
||||
/*!
|
||||
* @brief Input function is not inverted */
|
||||
#define IOCON_PIO_INV_DI 0x00u
|
||||
/*!
|
||||
* @brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u
|
||||
/*!
|
||||
* @brief Open drain is disabled */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u
|
||||
/*!
|
||||
* @brief Standard mode, output slew rate control is enabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO0_28_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 7. */
|
||||
#define PIO0_28_FUNC_ALT7 0x07u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO0_28_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_12_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_12_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_12_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_29_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_29_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_29_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_30_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_30_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_30_MODE_PULL_UP 0x02u
|
||||
|
||||
/*! @name PIO0_22 (number 78), P10[1]/USB0_VBUS
|
||||
@{ */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PIN 22U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PIN_MASK (1U << 22U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitUSBPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define PIO0_1_DIGIMODE_DIGITAL 0x01u /*!<@brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO0_1_FUNC_ALT0 0x00u /*!<@brief Selects pin function.: Alternative connection 0. */
|
||||
|
||||
/*! @name PIO0_1 (number 7), P18[2]/SD1_CLK
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLEDSPINS_LED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_INIT_GPIO_VALUE 0U /*!<@brief GPIO output initial state */
|
||||
#define BOARD_INITLEDSPINS_LED_GPIO_PIN_MASK (1U << 1U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITLEDSPINS_LED_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_PIN 1U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITLEDSPINS_LED_PIN_MASK (1U << 1U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitLEDsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_5 (number 88), S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITBUTTONSPINS_S1_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S1_GPIO_PIN_MASK (1U << 5U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITBUTTONSPINS_S1_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S1_PIN 5U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITBUTTONSPINS_S1_PIN_MASK (1U << 5U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBUTTONsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitPins_Core0(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
|
||||
#define IOCON_PIO_FUNC2 0x02u /*!<@brief Selects pin function 2 */
|
||||
#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */
|
||||
#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_31 (number 91), P19[7]/P19[8]/PLU_IN0/GPIO
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_MCLK_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_MCLK_PIN 31U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_MCLK_PIN_MASK (1U << 31U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_21 (number 76), P17[14]/FC7_I2S_SCK
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_20 (number 74), P17[10]/FC7_I2S_TX
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_19 (number 90), P17[12]/FC7_I2S_WS
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN 19U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN 10U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN_MASK (1U << 10U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_13 (number 2), P17[20]/FC6_I2S_RX
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN 13U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_16 (number 87), P18[17]/SD1_PWR_EN
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN 16U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN_MASK (1U << 16U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitI2SPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
|
||||
#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD
|
||||
@{ */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD
|
||||
@{ */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_19 (number 58), U7[3]/P18[14]/PLU_OUT1/GPIO
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_GPIO_PIN_MASK (1U << 19U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PIN 19U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitACCELPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @}
|
||||
*/
|
||||
#endif /* _PIN_MUX_H_ */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
+1283
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,856 @@
|
||||
<?xml version="1.0" encoding= "UTF-8" ?>
|
||||
<configuration name="LPCXpresso55S28" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_19 http://mcuxpresso.nxp.com/XSD/mex_configuration_19.xsd" uuid="485a5299-e2fe-41ab-bc43-80d8d2a4ae02" version="19" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_19" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
|
||||
<common>
|
||||
<processor>LPC55S28</processor>
|
||||
<package>LPC55S28JBD100</package>
|
||||
<board>LPCXpresso55S28</board>
|
||||
<board_revision>A2</board_revision>
|
||||
<mcu_data>ksdk2_0</mcu_data>
|
||||
<cores selected="cm33_core0">
|
||||
<core name="Cortex-M33 (Core #0)" id="cm33_core0" description=""/>
|
||||
</cores>
|
||||
<description></description>
|
||||
</common>
|
||||
<preferences>
|
||||
<validate_boot_init_only>true</validate_boot_init_only>
|
||||
<generate_code_modified_registers_only>false</generate_code_modified_registers_only>
|
||||
<custom_copyright>
|
||||
<text>/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
</text>
|
||||
<enabled>true</enabled>
|
||||
</custom_copyright>
|
||||
<update_include_paths>true</update_include_paths>
|
||||
<enable_parallel_routing>true</enable_parallel_routing>
|
||||
<generate_registers_defines>false</generate_registers_defines>
|
||||
</preferences>
|
||||
<tools>
|
||||
<pins name="Pins" version="17.0" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/pin_mux.c" update_enabled="true"/>
|
||||
<file path="board/pin_mux.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<pins_profile>
|
||||
<processor_version>25.09.10</processor_version>
|
||||
<external_user_signals>
|
||||
<properties/>
|
||||
</external_user_signals>
|
||||
</pins_profile>
|
||||
<functions_list>
|
||||
<function name="BOARD_InitDEBUG_UARTPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>true</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="FLEXCOMM0" description="Peripheral FLEXCOMM0 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="FLEXCOMM0" signal="RXD_SDA_MOSI_DATA" pin_num="92" pin_signal="PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="inactive"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="FLEXCOMM0" signal="TXD_SCL_MISO_WS" pin_num="94" pin_signal="PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="inactive"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
</pins>
|
||||
</function>
|
||||
<function name="BOARD_InitSWD_DEBUGPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>false</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="SWD" description="Peripheral SWD signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitSWD_DEBUGPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitSWD_DEBUGPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="SWD" signal="SWCLK" pin_num="13" pin_signal="PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullDown"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
<pin_feature name="asw" value="enabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="SWD" signal="SWDIO" pin_num="12" pin_signal="PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
<pin_feature name="asw" value="enabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="SWD" signal="SWO" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1">
|
||||
<pin_features>
|
||||
<pin_feature name="identifier" value="DEBUG_SWD_SWO"/>
|
||||
<pin_feature name="mode" value="inactive"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
<pin_feature name="asw" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
</pins>
|
||||
</function>
|
||||
<function name="BOARD_InitUSBPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>true</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="USBFSH" description="Peripheral USBFSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="Peripheral" resourceId="USBHSH" description="Peripheral USBHSH signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitUSBPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSBPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="USBFSH" signal="USB_DP" pin_num="97" pin_signal="USB0_DP"/>
|
||||
<pin peripheral="USBFSH" signal="USB_DM" pin_num="98" pin_signal="USB0_DM"/>
|
||||
<pin peripheral="USBFSH" signal="USB_VBUS" pin_num="78" pin_signal="PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="inactive"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="USBHSH" signal="USB_DM" pin_num="35" pin_signal="USB1_DM"/>
|
||||
<pin peripheral="USBHSH" signal="USB_DP" pin_num="34" pin_signal="USB1_DP"/>
|
||||
<pin peripheral="USBHSH" signal="USB_VBUS" pin_num="36" pin_signal="USB1_VBUS"/>
|
||||
<pin peripheral="USBHSH" signal="USB_PORTPWRN" pin_num="80" pin_signal="PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="USBFSH" signal="USB_PORTPWRN" pin_num="67" pin_signal="PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="USBFSH" signal="USB_OVERCURRENTN" pin_num="66" pin_signal="PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="USBHSH" signal="USB_OVERCURRENTN" pin_num="65" pin_signal="PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
</pins>
|
||||
</function>
|
||||
<function name="BOARD_InitLEDsPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>true</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDsPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="GPIO" signal="PIO1, 4" pin_num="1" pin_signal="PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="OUTPUT"/>
|
||||
<pin_feature name="gpio_init_state" value="true"/>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="GPIO" signal="PIO1, 6" pin_num="5" pin_signal="PIO1_6/FC0_TXD_SCL_MISO_WS/SD0_D3/CTIMER2_MAT1/SCT_GPI3">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="OUTPUT"/>
|
||||
<pin_feature name="gpio_init_state" value="true"/>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="GPIO" signal="PIO1, 7" pin_num="9" pin_signal="PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="OUTPUT"/>
|
||||
<pin_feature name="gpio_init_state" value="true"/>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
</pins>
|
||||
</function>
|
||||
<function name="BOARD_InitBUTTONsPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>true</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitBUTTONsPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONsPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="GPIO" signal="PIO0, 5" pin_num="88" pin_signal="PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="INPUT"/>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="GPIO" signal="PIO1, 18" pin_num="64" pin_signal="PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="INPUT"/>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="GPIO" signal="PIO1, 9" pin_num="10" pin_signal="PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="INPUT"/>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
<pin_feature name="asw" value="enabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="SYSCON" signal="RESET" pin_num="32" pin_signal="RESETN"/>
|
||||
</pins>
|
||||
</function>
|
||||
<function name="BOARD_InitPins_Core0">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>true</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins_Core0">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins/>
|
||||
</function>
|
||||
<function name="BOARD_InitI2SPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>false</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="Peripheral" resourceId="SYSCON" description="Peripheral SYSCON signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="Peripheral" resourceId="FLEXCOMM7" description="Peripheral FLEXCOMM7 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="Peripheral" resourceId="FLEXCOMM6" description="Peripheral FLEXCOMM6 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitI2SPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitI2SPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="SYSCON" signal="MCLK" pin_num="91" pin_signal="PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="inactive"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="FLEXCOMM7" signal="SCK" pin_num="76" pin_signal="PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="FLEXCOMM7" signal="RXD_SDA_MOSI_DATA" pin_num="74" pin_signal="PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="FLEXCOMM7" signal="TXD_SCL_MISO_WS" pin_num="90" pin_signal="PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="FLEXCOMM6" signal="SCK" pin_num="21" pin_signal="PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1">
|
||||
<pin_features>
|
||||
<pin_feature name="identifier" value="FC6_I2S_CLK"/>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
<pin_feature name="asw" value="enabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="FLEXCOMM6" signal="RXD_SDA_MOSI_DATA" pin_num="2" pin_signal="PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="FLEXCOMM6" signal="TXD_SCL_MISO_WS" pin_num="87" pin_signal="PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
</pins>
|
||||
</function>
|
||||
<function name="BOARD_InitACCELPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>false</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="FLEXCOMM4" description="Peripheral FLEXCOMM4 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitACCELPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_gpio" description="Pins initialization requires the LPC_GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.lpc_iocon" description="Pins initialization requires the LPC_IOCON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCELPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="FLEXCOMM4" signal="RXD_SDA_MOSI_DATA" pin_num="30" pin_signal="PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="FLEXCOMM4" signal="TXD_SCL_MISO_WS" pin_num="4" pin_signal="PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2">
|
||||
<pin_features>
|
||||
<pin_feature name="mode" value="pullUp"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="GPIO" signal="PIO1, 19" pin_num="58" pin_signal="PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="INPUT"/>
|
||||
<pin_feature name="mode" value="inactive"/>
|
||||
<pin_feature name="slew_rate" value="standard"/>
|
||||
<pin_feature name="invert" value="disabled"/>
|
||||
<pin_feature name="open_drain" value="disabled"/>
|
||||
<pin_feature name="asw" value="disabled"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
</pins>
|
||||
</function>
|
||||
</functions_list>
|
||||
</pins>
|
||||
<clocks name="Clocks" version="18.0" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/clock_config.c" update_enabled="true"/>
|
||||
<file path="board/clock_config.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<clocks_profile>
|
||||
<processor_version>25.09.10</processor_version>
|
||||
</clocks_profile>
|
||||
<clock_configurations>
|
||||
<clock_configuration name="BOARD_BootClockFRO12M" id_prefix="" prefix_user_defined="false">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFRO12M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<clock_sources/>
|
||||
<clock_outputs>
|
||||
<clock_output id="System_clock.outFreq" value="12 MHz" locked="false" accuracy=""/>
|
||||
</clock_outputs>
|
||||
<clock_settings>
|
||||
<setting id="PLL1_Mode" value="Normal" locked="false"/>
|
||||
</clock_settings>
|
||||
<called_from_default_init>false</called_from_default_init>
|
||||
</clock_configuration>
|
||||
<clock_configuration name="BOARD_BootClockFROHF96M" id_prefix="" prefix_user_defined="false">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockFROHF96M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<clock_sources>
|
||||
<clock_source id="ANACTRL.fro_hf.outFreq" value="96 MHz" locked="false" enabled="false"/>
|
||||
</clock_sources>
|
||||
<clock_outputs>
|
||||
<clock_output id="System_clock.outFreq" value="96 MHz" locked="false" accuracy=""/>
|
||||
</clock_outputs>
|
||||
<clock_settings>
|
||||
<setting id="ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG" value="Enable" locked="false"/>
|
||||
<setting id="SYSCON.MAINCLKSELA.sel" value="ANACTRL.fro_hf_clk" locked="false"/>
|
||||
</clock_settings>
|
||||
<called_from_default_init>false</called_from_default_init>
|
||||
</clock_configuration>
|
||||
<clock_configuration name="BOARD_BootClockPLL100M" id_prefix="" prefix_user_defined="false">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies>
|
||||
<dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M">
|
||||
<feature name="routed" evaluation="">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M">
|
||||
<feature name="direction" evaluation="">
|
||||
<data>INPUT</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL100M">
|
||||
<feature name="routed" evaluation="">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL100M">
|
||||
<feature name="direction" evaluation="">
|
||||
<data>OUTPUT</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL100M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<clock_sources>
|
||||
<clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/>
|
||||
</clock_sources>
|
||||
<clock_outputs>
|
||||
<clock_output id="System_clock.outFreq" value="100 MHz" locked="false" accuracy=""/>
|
||||
</clock_outputs>
|
||||
<clock_settings>
|
||||
<setting id="PLL0_Mode" value="Normal" locked="false"/>
|
||||
<setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/>
|
||||
<setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/>
|
||||
<setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL0_BYPASS" locked="false"/>
|
||||
<setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/>
|
||||
<setting id="SYSCON.PLL0M_MULT.scale" value="100" locked="true"/>
|
||||
<setting id="SYSCON.PLL0N_DIV.scale" value="4" locked="true"/>
|
||||
<setting id="SYSCON.PLL0_PDEC.scale" value="4" locked="true"/>
|
||||
</clock_settings>
|
||||
<called_from_default_init>false</called_from_default_init>
|
||||
</clock_configuration>
|
||||
<clock_configuration name="BOARD_BootClockPLL150M" id_prefix="" prefix_user_defined="false">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies>
|
||||
<dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M">
|
||||
<feature name="routed" evaluation="">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="SYSCON.XTALIN" description="'XTALIN' (Pins tool id: SYSCON.XTALIN, Clocks tool id: SYSCON.XTALIN) needs to have 'INPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M">
|
||||
<feature name="direction" evaluation="">
|
||||
<data>INPUT</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockPLL150M">
|
||||
<feature name="routed" evaluation="">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PinSignal" resourceId="SYSCON.XTALOUT" description="'XTALOUT' (Pins tool id: SYSCON.XTALOUT, Clocks tool id: SYSCON.XTALOUT) needs to have 'OUTPUT' direction" problem_level="1" source="Clocks:BOARD_BootClockPLL150M">
|
||||
<feature name="direction" evaluation="">
|
||||
<data>OUTPUT</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockPLL150M">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<clock_sources>
|
||||
<clock_source id="SYSCON.XTAL32M.outFreq" value="16 MHz" locked="false" enabled="true"/>
|
||||
</clock_sources>
|
||||
<clock_outputs>
|
||||
<clock_output id="FXCOM0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="SYSTICK0_clock.outFreq" value="144 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="System_clock.outFreq" value="144 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="USB0_clock.outFreq" value="48 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="USB1_PHY_clock.outFreq" value="16 MHz" locked="false" accuracy=""/>
|
||||
</clock_outputs>
|
||||
<clock_settings>
|
||||
<setting id="PLL0_Mode" value="Normal" locked="false"/>
|
||||
<setting id="PLL1_Mode" value="Normal" locked="false"/>
|
||||
<setting id="ENABLE_CLKIN_ENA" value="Enabled" locked="false"/>
|
||||
<setting id="ENABLE_PLL_USB_OUT" value="Enabled" locked="false"/>
|
||||
<setting id="ENABLE_SYSTEM_CLK_OUT" value="Enabled" locked="false"/>
|
||||
<setting id="SYSCON.FCCLKSEL0.sel" value="SYSCON.PLL0DIV" locked="false"/>
|
||||
<setting id="SYSCON.FRGCTRL0_DIV.scale" value="400" locked="false"/>
|
||||
<setting id="SYSCON.MAINCLKSELB.sel" value="SYSCON.PLL1_BYPASS" locked="false"/>
|
||||
<setting id="SYSCON.PLL0CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/>
|
||||
<setting id="SYSCON.PLL0DIV.scale" value="2" locked="false"/>
|
||||
<setting id="SYSCON.PLL0M_MULT.scale" value="150" locked="true"/>
|
||||
<setting id="SYSCON.PLL0N_DIV.scale" value="8" locked="true"/>
|
||||
<setting id="SYSCON.PLL0_PDEC.scale" value="2" locked="true"/>
|
||||
<setting id="SYSCON.PLL1CLKSEL.sel" value="SYSCON.CLK_IN_EN" locked="false"/>
|
||||
<setting id="SYSCON.PLL1M_MULT.scale" value="18" locked="false"/>
|
||||
<setting id="SYSCON.PLL1_PDEC.scale" value="2" locked="false"/>
|
||||
<setting id="SYSCON.SYSTICKCLKSEL0.sel" value="SYSCON.SYSTICKCLKDIV0" locked="false"/>
|
||||
<setting id="SYSCON.USB0CLKDIV.scale" value="3" locked="false"/>
|
||||
<setting id="SYSCON.USB0CLKSEL.sel" value="SYSCON.MAINCLKSELB" locked="false"/>
|
||||
</clock_settings>
|
||||
<called_from_default_init>true</called_from_default_init>
|
||||
</clock_configuration>
|
||||
</clock_configurations>
|
||||
</clocks>
|
||||
<dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files/>
|
||||
<dcdx_profile>
|
||||
<processor_version>N/A</processor_version>
|
||||
</dcdx_profile>
|
||||
<dcdx_configurations/>
|
||||
</dcdx>
|
||||
<periphs name="Peripherals" version="15.0" enabled="true" update_project_code="true">
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="FLEXCOMM USART Driver is not found in the toolchain/IDE project. The project will not compile!" problem_level="2" source="Peripherals">
|
||||
<feature name="enabled" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.flexcomm_usart" description="An unsupported version of the FLEXCOMM USART Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. The project might not compile correctly." problem_level="1" source="Peripherals">
|
||||
<feature name="version" evaluation="equivalent">
|
||||
<data type="Version">2.2.0</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="Tool" resourceId="Clocks" description="The Clocks tool is required by the Peripherals tool, but it is disabled." problem_level="2" source="Peripherals">
|
||||
<feature name="enabled" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<generated_project_files>
|
||||
<file path="board/peripherals.c" update_enabled="true"/>
|
||||
<file path="board/peripherals.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<peripherals_profile>
|
||||
<processor_version>25.09.10</processor_version>
|
||||
</peripherals_profile>
|
||||
<functional_groups>
|
||||
<functional_group name="BOARD_InitPeripherals" uuid="61d0725d-b300-49cb-9c66-b5edfbf8ffc1" called_from_default_init="true" id_prefix="" core="cm33_core0">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies>
|
||||
<dependency resourceType="ClockOutput" resourceId="FXCOM0_clock" description="FXCOM0 clock is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="frequency" evaluation="greaterThan">
|
||||
<data type="Frequency" unit="Hz">0</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_rxd" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="PeripheralUnifiedSignal" resourceId="FLEXCOMM0.usart_txd" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
|
||||
<feature name="routed" evaluation="equal">
|
||||
<data type="Boolean">true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<instances>
|
||||
<instance name="DEBUG_UART" uuid="30367b6e-4b43-4345-bc10-e4052723fa66" type="flexcomm_usart" type_id="flexcomm_usart_2.2.0" mode="polling" peripheral="FLEXCOMM0" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
|
||||
<config_set name="usartConfig_t">
|
||||
<struct name="usartConfig">
|
||||
<setting name="clockSource" value="FXCOMFunctionClock"/>
|
||||
<setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
|
||||
<setting name="baudRate_Bps" value="115200"/>
|
||||
<setting name="syncMode" value="kUSART_SyncModeDisabled"/>
|
||||
<setting name="parityMode" value="kUSART_ParityDisabled"/>
|
||||
<setting name="stopBitCount" value="kUSART_OneStopBit"/>
|
||||
<setting name="bitCountPerChar" value="kUSART_8BitsPerChar"/>
|
||||
<setting name="loopback" value="false"/>
|
||||
<setting name="txWatermark" value="kUSART_TxFifo0"/>
|
||||
<setting name="rxWatermark" value="kUSART_RxFifo1"/>
|
||||
<setting name="enableRx" value="true"/>
|
||||
<setting name="enableTx" value="true"/>
|
||||
<setting name="clockPolarity" value="kUSART_RxSampleOnFallingEdge"/>
|
||||
<setting name="enableContinuousSCLK" value="false"/>
|
||||
</struct>
|
||||
</config_set>
|
||||
</instance>
|
||||
<instance name="ACCEL" uuid="796441cb-6cbf-48af-8003-54caaeb9a132" type="flexcomm_i2c" type_id="flexcomm_i2c_2.0.1" mode="I2C_Polling" peripheral="FLEXCOMM4" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
|
||||
<config_set name="fsl_i2c" quick_selection="QS_I2C_Master">
|
||||
<setting name="i2c_mode" value="kI2C_Master"/>
|
||||
<setting name="clockSource" value="FXCOMFunctionClock"/>
|
||||
<setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
|
||||
<struct name="i2c_master_config">
|
||||
<setting name="enableMaster" value="true"/>
|
||||
<setting name="baudRate_Bps" value="100000"/>
|
||||
<setting name="enableTimeout" value="false"/>
|
||||
</struct>
|
||||
</config_set>
|
||||
</instance>
|
||||
<instance name="SW" uuid="723cdb07-2d95-4daf-94b4-1dfaf0ce6c04" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
|
||||
<config_set name="lpc_gpio"/>
|
||||
</instance>
|
||||
<instance name="LEDS" uuid="7ec70f15-5deb-44fa-b8cf-2d12230a37ac" type="lpc_gpio" type_id="lpc_gpio_2.1.1" mode="GPIO" peripheral="GPIO" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
|
||||
<config_set name="lpc_gpio"/>
|
||||
</instance>
|
||||
<instance name="NVIC" uuid="d00e8bd3-19f3-445c-9444-103d6461e0d1" type="nvic" type_id="nvic" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
|
||||
<config_set name="nvic">
|
||||
<array name="interrupt_table"/>
|
||||
<array name="interrupts"/>
|
||||
</config_set>
|
||||
</instance>
|
||||
</instances>
|
||||
</functional_group>
|
||||
</functional_groups>
|
||||
<components>
|
||||
<component name="system" uuid="4e239a4c-f368-4554-b66e-d1af6e8b1f5d" type_id="system_54b53072540eeeb8f8e9343e71f28176">
|
||||
<config_set_global name="global_system_definitions">
|
||||
<setting name="user_definitions" value=""/>
|
||||
<setting name="user_includes" value=""/>
|
||||
<setting name="global_init" value=""/>
|
||||
</config_set_global>
|
||||
</component>
|
||||
<component name="msg" uuid="7bbbd3b5-f7c2-4cb2-8b95-c037fdaf8e02" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
|
||||
<config_set_global name="global_messages"/>
|
||||
</component>
|
||||
<component name="generic_can" uuid="1560ea56-1bfb-4123-a192-daeeed8f2a1d" type_id="generic_can">
|
||||
<config_set_global name="global_can"/>
|
||||
</component>
|
||||
<component name="uart_cmsis_common" uuid="4305ffdd-d7f2-418a-b81b-8a042e7e4c75" type_id="uart_cmsis_common">
|
||||
<config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
|
||||
</component>
|
||||
<component name="generic_uart" uuid="fe22d2c9-7984-4e79-a7b1-8d26fad750be" type_id="generic_uart">
|
||||
<config_set_global name="global_uart"/>
|
||||
</component>
|
||||
<component name="generic_enet" uuid="f5a27f2d-a41b-4143-ad53-b9ee09903619" type_id="generic_enet">
|
||||
<config_set_global name="global_enet"/>
|
||||
</component>
|
||||
<component name="gpio_adapter_common" uuid="03fd1bc8-0fd6-4b47-a53c-1c40e2aa781e" type_id="gpio_adapter_common">
|
||||
<config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
|
||||
</component>
|
||||
</components>
|
||||
</periphs>
|
||||
<tee name="TEE" version="10.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files/>
|
||||
<tee_profile>
|
||||
<processor_version>N/A</processor_version>
|
||||
</tee_profile>
|
||||
</tee>
|
||||
</tools>
|
||||
</configuration>
|
||||
@@ -0,0 +1,19 @@
|
||||
set(MCU_VARIANT LPC55S28)
|
||||
set(MCU_CORE LPC55S28)
|
||||
set(MCU_DRIVER_VARIANT LPC55S69)
|
||||
|
||||
set(JLINK_DEVICE LPC55S28)
|
||||
set(JLINK_OPTION "-USB 000727031389")
|
||||
|
||||
set(PYOCD_TARGET LPC55S28)
|
||||
set(NXPLINK_DEVICE LPC55S28:LPCXpresso55S28)
|
||||
|
||||
# device fullspeed, host highspeed
|
||||
set(RHPORT_DEVICE 0)
|
||||
set(RHPORT_HOST 1)
|
||||
|
||||
function(update_board TARGET)
|
||||
target_compile_definitions(${TARGET} PUBLIC
|
||||
CPU_LPC55S28JBD100
|
||||
)
|
||||
endfunction()
|
||||
@@ -0,0 +1,59 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
/* metadata:
|
||||
name: LPCXpresso55s28
|
||||
url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s28-development-board:LPC55S28-EVK
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// LED: use red LED from generated pin_mux
|
||||
#define LED_PORT BOARD_INITLEDSPINS_LED_RED_PORT
|
||||
#define LED_PIN BOARD_INITLEDSPINS_LED_RED_PIN
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
// WAKE button: use S2 from generated pin_mux
|
||||
#define BUTTON_PORT BOARD_INITBUTTONSPINS_S2_PORT
|
||||
#define BUTTON_PIN BOARD_INITBUTTONSPINS_S2_PIN
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
// UART
|
||||
#define UART_DEV USART0
|
||||
|
||||
// XTAL
|
||||
#define XTAL0_CLK_HZ (16 * 1000 * 1000U)
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,22 @@
|
||||
MCU_VARIANT = LPC55S28
|
||||
MCU_CORE = LPC55S28
|
||||
MCU_DRIVER_VARIANT = LPC55S69
|
||||
|
||||
# device fullspeed, host highspeed
|
||||
RHPORT_DEVICE ?= 0
|
||||
RHPORT_HOST ?= 1
|
||||
|
||||
CFLAGS += -DCPU_LPC55S28JBD100
|
||||
|
||||
SRC_C += \
|
||||
$(TOP)/$(BOARD_PATH)/board/clock_config.c \
|
||||
$(TOP)/$(BOARD_PATH)/board/pin_mux.c \
|
||||
$(TOP)/$(BOARD_PATH)/board/peripherals.c
|
||||
|
||||
INC += $(TOP)/$(BOARD_PATH)/board
|
||||
|
||||
JLINK_DEVICE = LPC55S28
|
||||
PYOCD_TARGET = LPC55S28
|
||||
|
||||
# flash using pyocd
|
||||
flash: flash-pyocd
|
||||
+335
@@ -0,0 +1,335 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
/*
|
||||
* How to set up clock using clock driver functions:
|
||||
*
|
||||
* 1. Setup clock sources.
|
||||
*
|
||||
* 2. Set up wait states of the flash.
|
||||
*
|
||||
* 3. Set up all dividers.
|
||||
*
|
||||
* 4. Set up all selectors to provide selected clocks.
|
||||
*/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Clocks v18.0
|
||||
processor: LPC55S28
|
||||
package_id: LPC55S28JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S28
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_power.h"
|
||||
#include "fsl_clock.h"
|
||||
#include "clock_config.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
void BOARD_InitBootClocks(void)
|
||||
{
|
||||
BOARD_BootClockPLL150M();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockFRO12M **********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockFRO12M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 12 MHz}
|
||||
settings:
|
||||
- {id: PLL1_Mode, value: Normal}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockFRO12M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************* Configuration BOARD_BootClockFROHF96M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockFROHF96M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 96 MHz}
|
||||
settings:
|
||||
- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable}
|
||||
- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk}
|
||||
sources:
|
||||
- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockFROHF96M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */
|
||||
|
||||
POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL100M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockPLL100M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 100 MHz}
|
||||
settings:
|
||||
- {id: PLL0_Mode, value: Normal}
|
||||
- {id: ENABLE_CLKIN_ENA, value: Enabled}
|
||||
- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled}
|
||||
- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS}
|
||||
- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true}
|
||||
- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true}
|
||||
- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true}
|
||||
sources:
|
||||
- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockPLL100M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
/*!< Configure XTAL32M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */
|
||||
CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */
|
||||
SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */
|
||||
|
||||
POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up PLL */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG);
|
||||
const pll_setup_t pll0Setup = {
|
||||
.pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U),
|
||||
.pllndec = SYSCON_PLL0NDEC_NDIV(4U),
|
||||
.pllpdec = SYSCON_PLL0PDEC_PDIV(2U),
|
||||
.pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)},
|
||||
.pllRate = 100000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL150M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockPLL150M
|
||||
called_from_default_init: true
|
||||
outputs:
|
||||
- {id: FXCOM0_clock.outFreq, value: 48 MHz}
|
||||
- {id: SYSTICK0_clock.outFreq, value: 144 MHz}
|
||||
- {id: System_clock.outFreq, value: 144 MHz}
|
||||
- {id: USB0_clock.outFreq, value: 48 MHz}
|
||||
- {id: USB1_PHY_clock.outFreq, value: 16 MHz}
|
||||
settings:
|
||||
- {id: PLL0_Mode, value: Normal}
|
||||
- {id: PLL1_Mode, value: Normal}
|
||||
- {id: ENABLE_CLKIN_ENA, value: Enabled}
|
||||
- {id: ENABLE_PLL_USB_OUT, value: Enabled}
|
||||
- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled}
|
||||
- {id: SYSCON.FCCLKSEL0.sel, value: SYSCON.PLL0DIV}
|
||||
- {id: SYSCON.FRGCTRL0_DIV.scale, value: '400'}
|
||||
- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL1_BYPASS}
|
||||
- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL0DIV.scale, value: '2'}
|
||||
- {id: SYSCON.PLL0M_MULT.scale, value: '150', locked: true}
|
||||
- {id: SYSCON.PLL0N_DIV.scale, value: '8', locked: true}
|
||||
- {id: SYSCON.PLL0_PDEC.scale, value: '2', locked: true}
|
||||
- {id: SYSCON.PLL1CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL1M_MULT.scale, value: '18'}
|
||||
- {id: SYSCON.PLL1_PDEC.scale, value: '2'}
|
||||
- {id: SYSCON.SYSTICKCLKSEL0.sel, value: SYSCON.SYSTICKCLKDIV0}
|
||||
- {id: SYSCON.USB0CLKDIV.scale, value: '3'}
|
||||
- {id: SYSCON.USB0CLKSEL.sel, value: SYSCON.MAINCLKSELB}
|
||||
sources:
|
||||
- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockPLL150M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
/*!< Configure XTAL32M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */
|
||||
CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */
|
||||
SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_PLL_USB_OUT_MASK; /* Enable clk_in to HS USB */
|
||||
|
||||
POWER_SetVoltageForFreq(144000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(144000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up PLL */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG);
|
||||
const pll_setup_t pll0Setup = {
|
||||
.pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(31U),
|
||||
.pllndec = SYSCON_PLL0NDEC_NDIV(8U),
|
||||
.pllpdec = SYSCON_PLL0PDEC_PDIV(1U),
|
||||
.pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(150U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)},
|
||||
.pllRate = 150000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */
|
||||
|
||||
/*!< Set up PLL1 */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL1); /*!< Switch PLL1CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL1); /* Ensure PLL is on */
|
||||
const pll_setup_t pll1Setup = {
|
||||
.pllctrl = SYSCON_PLL1CTRL_CLKEN_MASK | SYSCON_PLL1CTRL_SELI(11U) | SYSCON_PLL1CTRL_SELP(5U),
|
||||
.pllndec = SYSCON_PLL1NDEC_NDIV(1U),
|
||||
.pllpdec = SYSCON_PLL1PDEC_PDIV(1U),
|
||||
.pllmdec = SYSCON_PLL1MDEC_MDIV(18U),
|
||||
.pllRate = 144000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivSystickClk0, 0U, true); /*!< Reset SYSTICKCLKDIV0 divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivSystickClk0, 1U, false); /*!< Set SYSTICKCLKDIV0 divider to value 1 */
|
||||
#if FSL_CLOCK_DRIVER_VERSION >= MAKE_VERSION(2, 3, 4)
|
||||
CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 144U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */
|
||||
#else
|
||||
CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 37120U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */
|
||||
#endif
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 0U, true); /*!< Reset USB0CLKDIV divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 3U, false); /*!< Set USB0CLKDIV divider to value 3 */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 0U, true); /*!< Reset PLL0DIV divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 2U, false); /*!< Set PLL0DIV divider to value 2 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */
|
||||
CLOCK_AttachClk(kMAIN_CLK_to_USB0_CLK); /*!< Switch USB0_CLK to MAIN_CLK */
|
||||
CLOCK_AttachClk(kPLL0_DIV_to_FLEXCOMM0); /*!< Switch FLEXCOMM0 to PLL0_DIV */
|
||||
CLOCK_AttachClk(kSYSTICK_DIV0_to_SYSTICK0); /*!< Switch SYSTICK0 to SYSTICK_DIV0 */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
+286
@@ -0,0 +1,286 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _CLOCK_CONFIG_H_
|
||||
#define _CLOCK_CONFIG_H_
|
||||
|
||||
#include "fsl_common.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal frequency in Hz */
|
||||
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes default configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootClocks(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockFRO12M **********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKFRO12M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFRO12M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKFRO12M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockFRO12M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************* Configuration BOARD_BootClockFROHF96M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockFROHF96M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL100M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKPLL100M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL100M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTEM_CLOCK 100000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKPLL100M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKPLL100M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKPLL100M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL100M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockPLL100M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL150M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK 144000000U /*!< Core clock frequency: 144000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKPLL150M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM0_CLOCK 48000000UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL150M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTICK0_CLOCK 144000000UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTEM_CLOCK 144000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKPLL150M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKPLL150M_USB0_CLOCK 48000000UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKPLL150M_USB1_PHY_CLOCK 16000000UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL150M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockPLL150M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
#endif /* _CLOCK_CONFIG_H_ */
|
||||
@@ -0,0 +1,157 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Peripherals v15.0
|
||||
processor: LPC55S28
|
||||
package_id: LPC55S28JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S28
|
||||
functionalGroups:
|
||||
- name: BOARD_InitPeripherals
|
||||
UUID: 61d0725d-b300-49cb-9c66-b5edfbf8ffc1
|
||||
called_from_default_init: true
|
||||
selectedCore: cm33_core0
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'system'
|
||||
- type_id: 'system_54b53072540eeeb8f8e9343e71f28176'
|
||||
- global_system_definitions:
|
||||
- user_definitions: ''
|
||||
- user_includes: ''
|
||||
- global_init: ''
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'uart_cmsis_common'
|
||||
- type_id: 'uart_cmsis_common'
|
||||
- global_USART_CMSIS_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'gpio_adapter_common'
|
||||
- type_id: 'gpio_adapter_common'
|
||||
- global_gpio_adapter_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "peripherals.h"
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitPeripherals functional group
|
||||
**********************************************************************************************************************/
|
||||
/***********************************************************************************************************************
|
||||
* DEBUG_UART initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'DEBUG_UART'
|
||||
- type: 'flexcomm_usart'
|
||||
- mode: 'polling'
|
||||
- custom_name_enabled: 'true'
|
||||
- type_id: 'flexcomm_usart_2.2.0'
|
||||
- functional_group: 'BOARD_InitPeripherals'
|
||||
- peripheral: 'FLEXCOMM0'
|
||||
- config_sets:
|
||||
- usartConfig_t:
|
||||
- usartConfig:
|
||||
- clockSource: 'FXCOMFunctionClock'
|
||||
- clockSourceFreq: 'ClocksTool_DefaultInit'
|
||||
- baudRate_Bps: '115200'
|
||||
- syncMode: 'kUSART_SyncModeDisabled'
|
||||
- parityMode: 'kUSART_ParityDisabled'
|
||||
- stopBitCount: 'kUSART_OneStopBit'
|
||||
- bitCountPerChar: 'kUSART_8BitsPerChar'
|
||||
- loopback: 'false'
|
||||
- txWatermark: 'kUSART_TxFifo0'
|
||||
- rxWatermark: 'kUSART_RxFifo1'
|
||||
- enableRx: 'true'
|
||||
- enableTx: 'true'
|
||||
- clockPolarity: 'kUSART_RxSampleOnFallingEdge'
|
||||
- enableContinuousSCLK: 'false'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
const usart_config_t DEBUG_UART_config = {
|
||||
.baudRate_Bps = 115200UL,
|
||||
.syncMode = kUSART_SyncModeDisabled,
|
||||
.parityMode = kUSART_ParityDisabled,
|
||||
.stopBitCount = kUSART_OneStopBit,
|
||||
.bitCountPerChar = kUSART_8BitsPerChar,
|
||||
.loopback = false,
|
||||
.txWatermark = kUSART_TxFifo0,
|
||||
.rxWatermark = kUSART_RxFifo1,
|
||||
.enableRx = true,
|
||||
.enableTx = true,
|
||||
.enableMode32k = false,
|
||||
.clockPolarity = kUSART_RxSampleOnFallingEdge,
|
||||
.enableContinuousSCLK = false
|
||||
};
|
||||
|
||||
static void DEBUG_UART_init(void) {
|
||||
/* Reset FLEXCOMM device */
|
||||
RESET_PeripheralReset(kFC0_RST_SHIFT_RSTn);
|
||||
USART_Init(DEBUG_UART_PERIPHERAL, &DEBUG_UART_config, DEBUG_UART_CLOCK_SOURCE);
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* NVIC initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'NVIC'
|
||||
- type: 'nvic'
|
||||
- mode: 'general'
|
||||
- custom_name_enabled: 'false'
|
||||
- type_id: 'nvic'
|
||||
- functional_group: 'BOARD_InitPeripherals'
|
||||
- peripheral: 'NVIC'
|
||||
- config_sets:
|
||||
- nvic:
|
||||
- interrupt_table: []
|
||||
- interrupts: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/* Empty initialization function (commented out)
|
||||
static void NVIC_init(void) {
|
||||
} */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitPeripherals(void)
|
||||
{
|
||||
/* Initialize components */
|
||||
DEBUG_UART_init();
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void)
|
||||
{
|
||||
BOARD_InitPeripherals();
|
||||
}
|
||||
@@ -0,0 +1,57 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PERIPHERALS_H_
|
||||
#define _PERIPHERALS_H_
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_reset.h"
|
||||
#include "fsl_usart.h"
|
||||
#include "fsl_clock.h"
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Definitions
|
||||
**********************************************************************************************************************/
|
||||
/* Definitions for BOARD_InitPeripherals functional group */
|
||||
/* Definition of peripheral ID */
|
||||
#define DEBUG_UART_PERIPHERAL ((USART_Type *)FLEXCOMM0)
|
||||
/* Definition of the clock source frequency */
|
||||
#define DEBUG_UART_CLOCK_SOURCE 48000000UL
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Global variables
|
||||
**********************************************************************************************************************/
|
||||
extern const usart_config_t DEBUG_UART_config;
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
|
||||
void BOARD_InitPeripherals(void);
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _PERIPHERALS_H_ */
|
||||
@@ -0,0 +1,795 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Pins v17.0
|
||||
processor: LPC55S28
|
||||
package_id: LPC55S28JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S28
|
||||
external_user_signals: {}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "fsl_iocon.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBootPins
|
||||
* Description : Calls initialization functions.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitBootPins(void)
|
||||
{
|
||||
BOARD_InitDEBUG_UARTPins();
|
||||
BOARD_InitUSBPins();
|
||||
BOARD_InitLEDsPins();
|
||||
BOARD_InitBUTTONsPins();
|
||||
BOARD_InitPins_Core0();
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitDEBUG_UARTPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitDEBUG_UARTPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitDEBUG_UARTPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t DEBUG_UART_RX = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, DEBUG_UART_RX);
|
||||
|
||||
const uint32_t DEBUG_UART_TX = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, DEBUG_UART_TX);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitSWD_DEBUGPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '13', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9, mode: pullDown,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '12', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '21', peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, identifier: DEBUG_SWD_SWO,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitSWD_DEBUGPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitSWD_DEBUGPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t DEBUG_SWD_SWO = (/* Pin is configured as SWO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is open (disabled) */
|
||||
IOCON_PIO_ASW_DI);
|
||||
/* PORT0 PIN10 (coords: 21) is configured as SWO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN, DEBUG_SWD_SWO);
|
||||
|
||||
const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-down function */
|
||||
IOCON_PIO_MODE_PULLDOWN |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN11 (coords: 13) is configured as SWCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK);
|
||||
|
||||
const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN12 (coords: 12) is configured as SWDIO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitUSBPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '97', peripheral: USBFSH, signal: USB_DP, pin_signal: USB0_DP}
|
||||
- {pin_num: '98', peripheral: USBFSH, signal: USB_DM, pin_signal: USB0_DM}
|
||||
- {pin_num: '78', peripheral: USBFSH, signal: USB_VBUS, pin_signal: PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '35', peripheral: USBHSH, signal: USB_DM, pin_signal: USB1_DM}
|
||||
- {pin_num: '34', peripheral: USBHSH, signal: USB_DP, pin_signal: USB1_DP}
|
||||
- {pin_num: '36', peripheral: USBHSH, signal: USB_VBUS, pin_signal: USB1_VBUS}
|
||||
- {pin_num: '80', peripheral: USBHSH, signal: USB_PORTPWRN, pin_signal: PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2, mode: pullUp}
|
||||
- {pin_num: '67', peripheral: USBFSH, signal: USB_PORTPWRN, pin_signal: PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2, mode: pullUp}
|
||||
- {pin_num: '66', peripheral: USBFSH, signal: USB_OVERCURRENTN, pin_signal: PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28,
|
||||
mode: pullUp}
|
||||
- {pin_num: '65', peripheral: USBHSH, signal: USB_OVERCURRENTN, pin_signal: PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1, mode: pullUp}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitUSBPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitUSBPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t USB0_VBUS = (/* Pin is configured as USB0_VBUS */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN22 (coords: 78) is configured as USB0_VBUS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITUSBPINS_USB0_VBUS_PORT, BOARD_INITUSBPINS_USB0_VBUS_PIN, USB0_VBUS);
|
||||
|
||||
IOCON->PIO[0][28] = ((IOCON->PIO[0][28] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT028 (pin 66) is configured as USB0_OVERCURRENTN. */
|
||||
| IOCON_PIO_FUNC(PIO0_28_FUNC_ALT7)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO0_28_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO0_28_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][12] = ((IOCON->PIO[1][12] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT112 (pin 67) is configured as USB0_PORTPWRN. */
|
||||
| IOCON_PIO_FUNC(PIO1_12_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_12_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_12_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][29] = ((IOCON->PIO[1][29] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT129 (pin 80) is configured as USB1_PORTPWRN. */
|
||||
| IOCON_PIO_FUNC(PIO1_29_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_29_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_29_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][30] = ((IOCON->PIO[1][30] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT130 (pin 65) is configured as USB1_OVERCURRENTN. */
|
||||
| IOCON_PIO_FUNC(PIO1_30_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_30_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_30_DIGIMODE_DIGITAL));
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitLEDsPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '1', peripheral: GPIO, signal: 'PIO1, 4', pin_signal: PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A, direction: OUTPUT, gpio_init_state: 'true',
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '5', peripheral: GPIO, signal: 'PIO1, 6', pin_signal: PIO1_6/FC0_TXD_SCL_MISO_WS/SD0_D3/CTIMER2_MAT1/SCT_GPI3, direction: OUTPUT, gpio_init_state: 'true',
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '9', peripheral: GPIO, signal: 'PIO1, 7', pin_signal: PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4, direction: OUTPUT, gpio_init_state: 'true',
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitLEDsPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitLEDsPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO1 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio1);
|
||||
|
||||
gpio_pin_config_t LED_BLUE_config = {
|
||||
.pinDirection = kGPIO_DigitalOutput,
|
||||
.outputLogic = 1U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_4 (pin 1) */
|
||||
GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config);
|
||||
|
||||
gpio_pin_config_t LED_RED_config = {
|
||||
.pinDirection = kGPIO_DigitalOutput,
|
||||
.outputLogic = 1U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_6 (pin 5) */
|
||||
GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config);
|
||||
|
||||
gpio_pin_config_t LED_GREEN_config = {
|
||||
.pinDirection = kGPIO_DigitalOutput,
|
||||
.outputLogic = 1U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_7 (pin 9) */
|
||||
GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config);
|
||||
|
||||
const uint32_t LED_BLUE = (/* Pin is configured as PIO1_4 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN4 (coords: 1) is configured as PIO1_4 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, LED_BLUE);
|
||||
|
||||
const uint32_t LED_RED = (/* Pin is configured as PIO1_6 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN6 (coords: 5) is configured as PIO1_6 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, LED_RED);
|
||||
|
||||
const uint32_t LED_GREEN = (/* Pin is configured as PIO1_7 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN7 (coords: 9) is configured as PIO1_7 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, LED_GREEN);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitBUTTONsPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '88', peripheral: GPIO, signal: 'PIO0, 5', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, direction: INPUT,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '64', peripheral: GPIO, signal: 'PIO1, 18', pin_signal: PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0, direction: INPUT, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '10', peripheral: GPIO, signal: 'PIO1, 9', pin_signal: PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12, direction: INPUT, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '32', peripheral: SYSCON, signal: RESET, pin_signal: RESETN}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBUTTONsPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitBUTTONsPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO0 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio0);
|
||||
|
||||
/* Enables the clock for the GPIO1 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio1);
|
||||
|
||||
gpio_pin_config_t S1_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO0_5 (pin 88) */
|
||||
GPIO_PinInit(BOARD_INITBUTTONSPINS_S1_GPIO, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, &S1_config);
|
||||
|
||||
gpio_pin_config_t S3_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_9 (pin 10) */
|
||||
GPIO_PinInit(BOARD_INITBUTTONSPINS_S3_GPIO, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, &S3_config);
|
||||
|
||||
gpio_pin_config_t S2_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_18 (pin 64) */
|
||||
GPIO_PinInit(BOARD_INITBUTTONSPINS_S2_GPIO, BOARD_INITBUTTONSPINS_S2_PORT, BOARD_INITBUTTONSPINS_S2_PIN, &S2_config);
|
||||
|
||||
const uint32_t S1 = (/* Pin is configured as PIO0_5 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN5 (coords: 88) is configured as PIO0_5 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, S1);
|
||||
|
||||
const uint32_t S2 = (/* Pin is configured as PIO1_18 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN18 (coords: 64) is configured as PIO1_18 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S2_PORT, BOARD_INITBUTTONSPINS_S2_PIN, S2);
|
||||
|
||||
const uint32_t S3 = (/* Pin is configured as PIO1_9 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT1 PIN9 (coords: 10) is configured as PIO1_9 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, S3);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitPins_Core0:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitPins_Core0
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitPins_Core0(void)
|
||||
{
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitI2SPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, mode: inactive, slew_rate: standard, invert: disabled,
|
||||
open_drain: disabled}
|
||||
- {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '21', peripheral: FLEXCOMM6, signal: SCK, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1,
|
||||
identifier: FC6_I2S_CLK, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '87', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitI2SPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitI2SPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t FC6_I2S_CLK = (/* Pin is configured as FC6_SCK */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN10 (coords: 21) is configured as FC6_SCK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_CLK_PORT, BOARD_INITI2SPINS_FC6_I2S_CLK_PIN, FC6_I2S_CLK);
|
||||
|
||||
const uint32_t FC7_I2S_WS = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_WS_PORT, BOARD_INITI2SPINS_FC7_I2S_WS_PIN, FC7_I2S_WS);
|
||||
|
||||
const uint32_t FC7_I2S_TX = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_TX_PORT, BOARD_INITI2SPINS_FC7_I2S_TX_PIN, FC7_I2S_TX);
|
||||
|
||||
const uint32_t FC7_I2S_SCK = (/* Pin is configured as FC7_SCK */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_SCK_PORT, BOARD_INITI2SPINS_FC7_I2S_SCK_PIN, FC7_I2S_SCK);
|
||||
|
||||
const uint32_t FC6_I2S_RX = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC2 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_RX_PORT, BOARD_INITI2SPINS_FC6_I2S_RX_PIN, FC6_I2S_RX);
|
||||
|
||||
const uint32_t FC6_I2S_WS = (/* Pin is configured as FC6_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC2 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN16 (coords: 87) is configured as FC6_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_WS_PORT, BOARD_INITI2SPINS_FC6_I2S_WS_PIN, FC6_I2S_WS);
|
||||
|
||||
const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SCL_PORT, BOARD_INITI2SPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL);
|
||||
|
||||
const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SDA_PORT, BOARD_INITI2SPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA);
|
||||
|
||||
const uint32_t MCLK = (/* Pin is configured as MCLK */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN31 (coords: 91) is configured as MCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_MCLK_PORT, BOARD_INITI2SPINS_MCLK_PIN, MCLK);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitACCELPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '58', peripheral: GPIO, signal: 'PIO1, 19', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF, direction: INPUT, mode: inactive,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitACCELPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitACCELPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO1 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio1);
|
||||
|
||||
gpio_pin_config_t ACCL_INTR_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_19 (pin 58) */
|
||||
GPIO_PinInit(BOARD_INITACCELPINS_ACCL_INTR_GPIO, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, &ACCL_INTR_config);
|
||||
|
||||
const uint32_t ACCL_INTR = (/* Pin is configured as PIO1_19 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is open (disabled) */
|
||||
IOCON_PIO_ASW_DI);
|
||||
/* PORT1 PIN19 (coords: 58) is configured as PIO1_19 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, ACCL_INTR);
|
||||
|
||||
const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SCL_PORT, BOARD_INITACCELPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL);
|
||||
|
||||
const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SDA_PORT, BOARD_INITACCELPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA);
|
||||
}
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
@@ -0,0 +1,433 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PIN_MUX_H_
|
||||
#define _PIN_MUX_H_
|
||||
|
||||
/*!
|
||||
* @addtogroup pin_mux
|
||||
* @{
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* API
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @brief Calls initialization functions.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootPins(void);
|
||||
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_29 (number 92), P8[2]/U6[13]/FC0_USART_RXD
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 29U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 29U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_30 (number 94), P8[3]/U6[12]/FC0_USART_TXD
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 30U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 30U)
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC6 0x06u /*!<@brief Selects pin function 6 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLDOWN 0x10u /*!<@brief Selects pull-down function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_11 (number 13), U14[4]/SWDCLK_TRGT
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 11U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 11U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_12 (number 12), U15[4]/D7/P7[2]/IF_SWDIO
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 12U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 12U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN 10U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN_MASK (1U << 10U)
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Enables digital function */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u
|
||||
/*!
|
||||
* @brief Selects pin function 7 */
|
||||
#define IOCON_PIO_FUNC7 0x07u
|
||||
/*!
|
||||
* @brief Input function is not inverted */
|
||||
#define IOCON_PIO_INV_DI 0x00u
|
||||
/*!
|
||||
* @brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u
|
||||
/*!
|
||||
* @brief Open drain is disabled */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u
|
||||
/*!
|
||||
* @brief Standard mode, output slew rate control is enabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO0_28_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 7. */
|
||||
#define PIO0_28_FUNC_ALT7 0x07u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO0_28_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_12_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_12_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_12_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_29_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_29_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_29_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_30_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_30_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_30_MODE_PULL_UP 0x02u
|
||||
|
||||
/*! @name PIO0_22 (number 78), P10[1]/USB0_VBUS
|
||||
@{ */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PIN 22U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PIN_MASK (1U << 22U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitUSBPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_4 (number 1), R78/P18[5]/LEDR/PWM_ARD
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN_MASK (1U << 4U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_PIN 4U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_PIN_MASK (1U << 4U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_6 (number 5), R80/P18[9]/LEDB/PWM_ARD
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN_MASK (1U << 6U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_PIN 6U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_PIN_MASK (1U << 6U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_7 (number 9), R79/P18[7]/LEDG/PWM_ARD
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN_MASK (1U << 7U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_PIN 7U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_PIN_MASK (1U << 7U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitLEDsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_5 (number 88), S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITBUTTONSPINS_S1_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S1_GPIO_PIN_MASK (1U << 5U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITBUTTONSPINS_S1_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S1_PIN 5U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITBUTTONSPINS_S1_PIN_MASK (1U << 5U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_18 (number 64), S2/P18[16]/P24[2]/WAKE/GPIO
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITBUTTONSPINS_S2_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S2_GPIO_PIN_MASK (1U << 18U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITBUTTONSPINS_S2_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S2_PIN 18U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITBUTTONSPINS_S2_PIN_MASK (1U << 18U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_9 (number 10), S3/P18[1]/PIO1_9_GPIO_ARD
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITBUTTONSPINS_S3_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S3_GPIO_PIN_MASK (1U << 9U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITBUTTONSPINS_S3_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S3_PIN 9U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITBUTTONSPINS_S3_PIN_MASK (1U << 9U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBUTTONsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitPins_Core0(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
|
||||
#define IOCON_PIO_FUNC2 0x02u /*!<@brief Selects pin function 2 */
|
||||
#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */
|
||||
#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_31 (number 91), P19[7]/P19[8]/PLU_IN0/GPIO
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_MCLK_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_MCLK_PIN 31U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_MCLK_PIN_MASK (1U << 31U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_21 (number 76), P17[14]/FC7_I2S_SCK
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_20 (number 74), P17[10]/FC7_I2S_TX
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_19 (number 90), P17[12]/FC7_I2S_WS
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN 19U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN 10U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN_MASK (1U << 10U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_13 (number 2), P17[20]/FC6_I2S_RX
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN 13U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_16 (number 87), P18[17]/SD1_PWR_EN
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN 16U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN_MASK (1U << 16U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitI2SPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
|
||||
#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD
|
||||
@{ */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD
|
||||
@{ */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_19 (number 58), U7[3]/P18[14]/PLU_OUT1/GPIO
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_GPIO_PIN_MASK (1U << 19U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PIN 19U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitACCELPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @}
|
||||
*/
|
||||
#endif /* _PIN_MUX_H_ */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
+1329
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,17 @@
|
||||
set(MCU_VARIANT LPC55S69)
|
||||
set(MCU_CORE LPC55S69_cm33_core0)
|
||||
|
||||
set(JLINK_DEVICE LPC55S69_M33_0)
|
||||
|
||||
set(PYOCD_TARGET LPC55S69)
|
||||
set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69)
|
||||
|
||||
# device highspeed, host fullspeed
|
||||
set(RHPORT_DEVICE 1)
|
||||
set(RHPORT_HOST 0)
|
||||
|
||||
function(update_board TARGET)
|
||||
target_compile_definitions(${TARGET} PUBLIC
|
||||
CPU_LPC55S69JBD100_cm33_core0
|
||||
)
|
||||
endfunction()
|
||||
@@ -0,0 +1,59 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
/* metadata:
|
||||
name: LPCXpresso55s69
|
||||
url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s69-development-board:LPC55S69-EVK
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// LED: use red LED from generated pin_mux
|
||||
#define LED_PORT BOARD_INITLEDSPINS_LED_RED_PORT
|
||||
#define LED_PIN BOARD_INITLEDSPINS_LED_RED_PIN
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
// WAKE button: use S2 from generated pin_mux
|
||||
#define BUTTON_PORT BOARD_INITBUTTONSPINS_S2_PORT
|
||||
#define BUTTON_PIN BOARD_INITBUTTONSPINS_S2_PIN
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
// UART
|
||||
#define UART_DEV USART0
|
||||
|
||||
// XTAL
|
||||
#define XTAL0_CLK_HZ (16 * 1000 * 1000U)
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,21 @@
|
||||
MCU_VARIANT = LPC55S69
|
||||
MCU_CORE = LPC55S69_cm33_core0
|
||||
|
||||
# device highspeed, host fullspeed
|
||||
RHPORT_DEVICE ?= 1
|
||||
RHPORT_HOST ?= 0
|
||||
|
||||
CFLAGS += -DCPU_LPC55S69JBD100_cm33_core0
|
||||
|
||||
SRC_C += \
|
||||
$(TOP)/$(BOARD_PATH)/board/clock_config.c \
|
||||
$(TOP)/$(BOARD_PATH)/board/pin_mux.c \
|
||||
$(TOP)/$(BOARD_PATH)/board/peripherals.c
|
||||
|
||||
INC += $(TOP)/$(BOARD_PATH)/board
|
||||
|
||||
JLINK_DEVICE = LPC55S69
|
||||
PYOCD_TARGET = LPC55S69
|
||||
|
||||
# flash using pyocd
|
||||
flash: flash-pyocd
|
||||
+328
@@ -0,0 +1,328 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
/*
|
||||
* How to set up clock using clock driver functions:
|
||||
*
|
||||
* 1. Setup clock sources.
|
||||
*
|
||||
* 2. Set up wait states of the flash.
|
||||
*
|
||||
* 3. Set up all dividers.
|
||||
*
|
||||
* 4. Set up all selectors to provide selected clocks.
|
||||
*/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Clocks v18.0
|
||||
processor: LPC55S69
|
||||
package_id: LPC55S69JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S69
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_power.h"
|
||||
#include "fsl_clock.h"
|
||||
#include "clock_config.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
void BOARD_InitBootClocks(void)
|
||||
{
|
||||
BOARD_BootClockPLL150M();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockFRO12M **********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockFRO12M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 12 MHz}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockFRO12M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************* Configuration BOARD_BootClockFROHF96M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockFROHF96M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 96 MHz}
|
||||
settings:
|
||||
- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable}
|
||||
- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk}
|
||||
sources:
|
||||
- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockFROHF96M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */
|
||||
|
||||
POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL100M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockPLL100M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 100 MHz}
|
||||
settings:
|
||||
- {id: PLL0_Mode, value: Normal}
|
||||
- {id: ENABLE_CLKIN_ENA, value: Enabled}
|
||||
- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled}
|
||||
- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS}
|
||||
- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true}
|
||||
- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true}
|
||||
- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true}
|
||||
sources:
|
||||
- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockPLL100M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
/*!< Configure XTAL32M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */
|
||||
CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */
|
||||
SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */
|
||||
|
||||
POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up PLL */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG);
|
||||
const pll_setup_t pll0Setup = {
|
||||
.pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U),
|
||||
.pllndec = SYSCON_PLL0NDEC_NDIV(4U),
|
||||
.pllpdec = SYSCON_PLL0PDEC_PDIV(2U),
|
||||
.pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)},
|
||||
.pllRate = 100000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL150M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockPLL150M
|
||||
called_from_default_init: true
|
||||
outputs:
|
||||
- {id: FXCOM0_clock.outFreq, value: 48 MHz}
|
||||
- {id: System_clock.outFreq, value: 144 MHz}
|
||||
- {id: USB0_clock.outFreq, value: 48 MHz}
|
||||
- {id: USB1_PHY_clock.outFreq, value: 16 MHz}
|
||||
settings:
|
||||
- {id: PLL0_Mode, value: Normal}
|
||||
- {id: PLL1_Mode, value: Normal}
|
||||
- {id: ENABLE_CLKIN_ENA, value: Enabled}
|
||||
- {id: ENABLE_PLL_USB_OUT, value: Enabled}
|
||||
- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled}
|
||||
- {id: SYSCON.FCCLKSEL0.sel, value: SYSCON.PLL0DIV}
|
||||
- {id: SYSCON.FRGCTRL0_DIV.scale, value: '400'}
|
||||
- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL1_BYPASS}
|
||||
- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL0DIV.scale, value: '2'}
|
||||
- {id: SYSCON.PLL0M_MULT.scale, value: '150', locked: true}
|
||||
- {id: SYSCON.PLL0N_DIV.scale, value: '8', locked: true}
|
||||
- {id: SYSCON.PLL0_PDEC.scale, value: '2', locked: true}
|
||||
- {id: SYSCON.PLL1CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL1M_MULT.scale, value: '18'}
|
||||
- {id: SYSCON.PLL1_PDEC.scale, value: '2'}
|
||||
- {id: SYSCON.USB0CLKDIV.scale, value: '3'}
|
||||
- {id: SYSCON.USB0CLKSEL.sel, value: SYSCON.MAINCLKSELB}
|
||||
sources:
|
||||
- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockPLL150M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
/*!< Configure XTAL32M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */
|
||||
CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */
|
||||
SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_PLL_USB_OUT_MASK; /* Enable clk_in to HS USB */
|
||||
|
||||
POWER_SetVoltageForFreq(144000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(144000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up PLL */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG);
|
||||
const pll_setup_t pll0Setup = {
|
||||
.pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(31U),
|
||||
.pllndec = SYSCON_PLL0NDEC_NDIV(8U),
|
||||
.pllpdec = SYSCON_PLL0PDEC_PDIV(1U),
|
||||
.pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(150U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)},
|
||||
.pllRate = 150000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */
|
||||
|
||||
/*!< Set up PLL1 */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL1); /*!< Switch PLL1CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL1); /* Ensure PLL is on */
|
||||
const pll_setup_t pll1Setup = {
|
||||
.pllctrl = SYSCON_PLL1CTRL_CLKEN_MASK | SYSCON_PLL1CTRL_SELI(11U) | SYSCON_PLL1CTRL_SELP(5U),
|
||||
.pllndec = SYSCON_PLL1NDEC_NDIV(1U),
|
||||
.pllpdec = SYSCON_PLL1PDEC_PDIV(1U),
|
||||
.pllmdec = SYSCON_PLL1MDEC_MDIV(18U),
|
||||
.pllRate = 144000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */
|
||||
|
||||
/*!< Set up dividers */
|
||||
#if FSL_CLOCK_DRIVER_VERSION >= MAKE_VERSION(2, 3, 4)
|
||||
CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 144U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */
|
||||
#else
|
||||
CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 37120U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */
|
||||
#endif
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 0U, true); /*!< Reset USB0CLKDIV divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 3U, false); /*!< Set USB0CLKDIV divider to value 3 */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 0U, true); /*!< Reset PLL0DIV divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 2U, false); /*!< Set PLL0DIV divider to value 2 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */
|
||||
CLOCK_AttachClk(kMAIN_CLK_to_USB0_CLK); /*!< Switch USB0_CLK to MAIN_CLK */
|
||||
CLOCK_AttachClk(kPLL0_DIV_to_FLEXCOMM0); /*!< Switch FLEXCOMM0 to PLL0_DIV */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
+290
@@ -0,0 +1,290 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _CLOCK_CONFIG_H_
|
||||
#define _CLOCK_CONFIG_H_
|
||||
|
||||
#include "fsl_common.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal frequency in Hz */
|
||||
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes default configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootClocks(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockFRO12M **********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKFRO12M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFRO12M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKFRO12M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockFRO12M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************* Configuration BOARD_BootClockFROHF96M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockFROHF96M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL100M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKPLL100M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL100M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTEM_CLOCK 100000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKPLL100M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKPLL100M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKPLL100M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL100M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockPLL100M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL150M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK 144000000U /*!< Core clock frequency: 144000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKPLL150M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM0_CLOCK 48000000UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL150M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTEM_CLOCK 144000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKPLL150M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKPLL150M_USB0_CLOCK 48000000UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKPLL150M_USB1_PHY_CLOCK 16000000UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL150M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockPLL150M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
#endif /* _CLOCK_CONFIG_H_ */
|
||||
@@ -0,0 +1,160 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Peripherals v15.0
|
||||
processor: LPC55S69
|
||||
package_id: LPC55S69JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S69
|
||||
functionalGroups:
|
||||
- name: BOARD_InitPeripherals_cm33_core0
|
||||
UUID: 61d0725d-b300-49cb-9c66-b5edfbf8ffc1
|
||||
called_from_default_init: true
|
||||
selectedCore: cm33_core0
|
||||
- name: BOARD_InitPeripherals_cm33_core1
|
||||
UUID: e2041cd4-ebb6-45a5-807f-e0c2dc047d48
|
||||
selectedCore: cm33_core1
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'system'
|
||||
- type_id: 'system'
|
||||
- global_system_definitions:
|
||||
- user_definitions: ''
|
||||
- user_includes: ''
|
||||
- global_init: ''
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'uart_cmsis_common'
|
||||
- type_id: 'uart_cmsis_common'
|
||||
- global_USART_CMSIS_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'gpio_adapter_common'
|
||||
- type_id: 'gpio_adapter_common'
|
||||
- global_gpio_adapter_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "peripherals.h"
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitPeripherals_cm33_core0 functional group
|
||||
**********************************************************************************************************************/
|
||||
/***********************************************************************************************************************
|
||||
* DEBUG_UART initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'DEBUG_UART'
|
||||
- type: 'flexcomm_usart'
|
||||
- mode: 'polling'
|
||||
- custom_name_enabled: 'true'
|
||||
- type_id: 'flexcomm_usart_2.2.0'
|
||||
- functional_group: 'BOARD_InitPeripherals_cm33_core0'
|
||||
- peripheral: 'FLEXCOMM0'
|
||||
- config_sets:
|
||||
- usartConfig_t:
|
||||
- usartConfig:
|
||||
- clockSource: 'FXCOMFunctionClock'
|
||||
- clockSourceFreq: 'ClocksTool_DefaultInit'
|
||||
- baudRate_Bps: '115200'
|
||||
- syncMode: 'kUSART_SyncModeDisabled'
|
||||
- parityMode: 'kUSART_ParityDisabled'
|
||||
- stopBitCount: 'kUSART_OneStopBit'
|
||||
- bitCountPerChar: 'kUSART_8BitsPerChar'
|
||||
- loopback: 'false'
|
||||
- txWatermark: 'kUSART_TxFifo0'
|
||||
- rxWatermark: 'kUSART_RxFifo1'
|
||||
- enableRx: 'true'
|
||||
- enableTx: 'true'
|
||||
- clockPolarity: 'kUSART_RxSampleOnFallingEdge'
|
||||
- enableContinuousSCLK: 'false'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
const usart_config_t DEBUG_UART_config = {
|
||||
.baudRate_Bps = 115200UL,
|
||||
.syncMode = kUSART_SyncModeDisabled,
|
||||
.parityMode = kUSART_ParityDisabled,
|
||||
.stopBitCount = kUSART_OneStopBit,
|
||||
.bitCountPerChar = kUSART_8BitsPerChar,
|
||||
.loopback = false,
|
||||
.txWatermark = kUSART_TxFifo0,
|
||||
.rxWatermark = kUSART_RxFifo1,
|
||||
.enableRx = true,
|
||||
.enableTx = true,
|
||||
.enableMode32k = false,
|
||||
.clockPolarity = kUSART_RxSampleOnFallingEdge,
|
||||
.enableContinuousSCLK = false
|
||||
};
|
||||
|
||||
static void DEBUG_UART_init(void) {
|
||||
/* Reset FLEXCOMM device */
|
||||
RESET_PeripheralReset(kFC0_RST_SHIFT_RSTn);
|
||||
USART_Init(DEBUG_UART_PERIPHERAL, &DEBUG_UART_config, DEBUG_UART_CLOCK_SOURCE);
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* NVIC initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'NVIC'
|
||||
- type: 'nvic'
|
||||
- mode: 'general'
|
||||
- custom_name_enabled: 'false'
|
||||
- type_id: 'nvic'
|
||||
- functional_group: 'BOARD_InitPeripherals_cm33_core0'
|
||||
- peripheral: 'NVIC'
|
||||
- config_sets:
|
||||
- nvic:
|
||||
- interrupt_table: []
|
||||
- interrupts: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/* Empty initialization function (commented out)
|
||||
static void NVIC_init(void) {
|
||||
} */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitPeripherals_cm33_core0(void)
|
||||
{
|
||||
/* Initialize components */
|
||||
DEBUG_UART_init();
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void)
|
||||
{
|
||||
BOARD_InitPeripherals_cm33_core0();
|
||||
}
|
||||
@@ -0,0 +1,57 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PERIPHERALS_H_
|
||||
#define _PERIPHERALS_H_
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_reset.h"
|
||||
#include "fsl_usart.h"
|
||||
#include "fsl_clock.h"
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Definitions
|
||||
**********************************************************************************************************************/
|
||||
/* Definitions for BOARD_InitPeripherals_cm33_core0 functional group */
|
||||
/* Definition of peripheral ID */
|
||||
#define DEBUG_UART_PERIPHERAL ((USART_Type *)FLEXCOMM0)
|
||||
/* Definition of the clock source frequency */
|
||||
#define DEBUG_UART_CLOCK_SOURCE 48000000UL
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Global variables
|
||||
**********************************************************************************************************************/
|
||||
extern const usart_config_t DEBUG_UART_config;
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
|
||||
void BOARD_InitPeripherals_cm33_core0(void);
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _PERIPHERALS_H_ */
|
||||
@@ -0,0 +1,860 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Pins v17.0
|
||||
processor: LPC55S69
|
||||
package_id: LPC55S69JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S69
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "fsl_iocon.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBootPins
|
||||
* Description : Calls initialization functions.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitBootPins(void)
|
||||
{
|
||||
BOARD_InitDEBUG_UARTPins();
|
||||
BOARD_InitUSBPins();
|
||||
BOARD_InitLEDsPins();
|
||||
BOARD_InitBUTTONsPins();
|
||||
BOARD_InitPins_Core0();
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitDEBUG_UARTPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitDEBUG_UARTPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitDEBUG_UARTPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t DEBUG_UART_RX = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, DEBUG_UART_RX);
|
||||
|
||||
const uint32_t DEBUG_UART_TX = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, DEBUG_UART_TX);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitSWD_DEBUGPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '13', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9, mode: pullDown,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '12', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '21', peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, identifier: DEBUG_SWD_SWO,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitSWD_DEBUGPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitSWD_DEBUGPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t DEBUG_SWD_SWO = (/* Pin is configured as SWO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is open (disabled) */
|
||||
IOCON_PIO_ASW_DI);
|
||||
/* PORT0 PIN10 (coords: 21) is configured as SWO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN, DEBUG_SWD_SWO);
|
||||
|
||||
if (Chip_GetVersion()==1)
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-down function */
|
||||
IOCON_PIO_MODE_PULLDOWN |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN11 (coords: 13) is configured as SWCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK);
|
||||
}
|
||||
else
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-down function */
|
||||
IOCON_PIO_MODE_PULLDOWN |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled), only for A0 version */
|
||||
IOCON_PIO_ASW_DIS_EN);
|
||||
/* PORT0 PIN11 (coords: 13) is configured as SWCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK);
|
||||
}
|
||||
|
||||
if (Chip_GetVersion()==1)
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN12 (coords: 12) is configured as SWDIO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO);
|
||||
}
|
||||
else
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled), only for A0 version */
|
||||
IOCON_PIO_ASW_DIS_EN);
|
||||
/* PORT0 PIN12 (coords: 12) is configured as SWDIO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO);
|
||||
}
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitUSBPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '97', peripheral: USBFSH, signal: USB_DP, pin_signal: USB0_DP}
|
||||
- {pin_num: '98', peripheral: USBFSH, signal: USB_DM, pin_signal: USB0_DM}
|
||||
- {pin_num: '78', peripheral: USBFSH, signal: USB_VBUS, pin_signal: PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '35', peripheral: USBHSH, signal: USB_DM, pin_signal: USB1_DM}
|
||||
- {pin_num: '34', peripheral: USBHSH, signal: USB_DP, pin_signal: USB1_DP}
|
||||
- {pin_num: '36', peripheral: USBHSH, signal: USB_VBUS, pin_signal: USB1_VBUS}
|
||||
- {pin_num: '65', peripheral: USBHSH, signal: USB_OVERCURRENTN, pin_signal: PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1, mode: pullUp}
|
||||
- {pin_num: '66', peripheral: USBFSH, signal: USB_OVERCURRENTN, pin_signal: PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28,
|
||||
mode: pullUp}
|
||||
- {pin_num: '67', peripheral: USBFSH, signal: USB_PORTPWRN, pin_signal: PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2, mode: pullUp}
|
||||
- {pin_num: '80', peripheral: USBHSH, signal: USB_PORTPWRN, pin_signal: PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2, mode: pullUp}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitUSBPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitUSBPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t USB0_VBUS = (/* Pin is configured as USB0_VBUS */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN22 (coords: 78) is configured as USB0_VBUS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITUSBPINS_USB0_VBUS_PORT, BOARD_INITUSBPINS_USB0_VBUS_PIN, USB0_VBUS);
|
||||
|
||||
IOCON->PIO[0][28] = ((IOCON->PIO[0][28] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT028 (pin 66) is configured as USB0_OVERCURRENTN. */
|
||||
| IOCON_PIO_FUNC(PIO0_28_FUNC_ALT7)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO0_28_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO0_28_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][12] = ((IOCON->PIO[1][12] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT112 (pin 67) is configured as USB0_PORTPWRN. */
|
||||
| IOCON_PIO_FUNC(PIO1_12_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_12_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_12_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][29] = ((IOCON->PIO[1][29] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT129 (pin 80) is configured as USB1_PORTPWRN. */
|
||||
| IOCON_PIO_FUNC(PIO1_29_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_29_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_29_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][30] = ((IOCON->PIO[1][30] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT130 (pin 65) is configured as USB1_OVERCURRENTN. */
|
||||
| IOCON_PIO_FUNC(PIO1_30_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_30_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_30_DIGIMODE_DIGITAL));
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitLEDsPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '1', peripheral: GPIO, signal: 'PIO1, 4', pin_signal: PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A, direction: OUTPUT, gpio_init_state: 'true',
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '5', peripheral: GPIO, signal: 'PIO1, 6', pin_signal: PIO1_6/FC0_TXD_SCL_MISO_WS/SD0_D3/CTIMER2_MAT1/SCT_GPI3, direction: OUTPUT, gpio_init_state: 'true',
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '9', peripheral: GPIO, signal: 'PIO1, 7', pin_signal: PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4, direction: OUTPUT, gpio_init_state: 'true',
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitLEDsPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitLEDsPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO1 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio1);
|
||||
|
||||
gpio_pin_config_t LED_BLUE_config = {
|
||||
.pinDirection = kGPIO_DigitalOutput,
|
||||
.outputLogic = 1U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_4 (pin 1) */
|
||||
GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config);
|
||||
|
||||
gpio_pin_config_t LED_RED_config = {
|
||||
.pinDirection = kGPIO_DigitalOutput,
|
||||
.outputLogic = 1U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_6 (pin 5) */
|
||||
GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config);
|
||||
|
||||
gpio_pin_config_t LED_GREEN_config = {
|
||||
.pinDirection = kGPIO_DigitalOutput,
|
||||
.outputLogic = 1U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_7 (pin 9) */
|
||||
GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config);
|
||||
|
||||
const uint32_t LED_BLUE = (/* Pin is configured as PIO1_4 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN4 (coords: 1) is configured as PIO1_4 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, LED_BLUE);
|
||||
|
||||
const uint32_t LED_RED = (/* Pin is configured as PIO1_6 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN6 (coords: 5) is configured as PIO1_6 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, LED_RED);
|
||||
|
||||
const uint32_t LED_GREEN = (/* Pin is configured as PIO1_7 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN7 (coords: 9) is configured as PIO1_7 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, LED_GREEN);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitBUTTONsPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '88', peripheral: GPIO, signal: 'PIO0, 5', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, direction: INPUT,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '64', peripheral: GPIO, signal: 'PIO1, 18', pin_signal: PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0, direction: INPUT, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '10', peripheral: GPIO, signal: 'PIO1, 9', pin_signal: PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12, direction: INPUT, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '32', peripheral: SYSCON, signal: RESET, pin_signal: RESETN}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBUTTONsPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitBUTTONsPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO0 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio0);
|
||||
|
||||
/* Enables the clock for the GPIO1 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio1);
|
||||
|
||||
gpio_pin_config_t S1_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO0_5 (pin 88) */
|
||||
GPIO_PinInit(BOARD_INITBUTTONSPINS_S1_GPIO, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, &S1_config);
|
||||
|
||||
gpio_pin_config_t S3_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_9 (pin 10) */
|
||||
GPIO_PinInit(BOARD_INITBUTTONSPINS_S3_GPIO, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, &S3_config);
|
||||
|
||||
gpio_pin_config_t S2_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_18 (pin 64) */
|
||||
GPIO_PinInit(BOARD_INITBUTTONSPINS_S2_GPIO, BOARD_INITBUTTONSPINS_S2_PORT, BOARD_INITBUTTONSPINS_S2_PIN, &S2_config);
|
||||
|
||||
const uint32_t S1 = (/* Pin is configured as PIO0_5 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN5 (coords: 88) is configured as PIO0_5 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S1_PORT, BOARD_INITBUTTONSPINS_S1_PIN, S1);
|
||||
|
||||
const uint32_t S2 = (/* Pin is configured as PIO1_18 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN18 (coords: 64) is configured as PIO1_18 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S2_PORT, BOARD_INITBUTTONSPINS_S2_PIN, S2);
|
||||
|
||||
if (Chip_GetVersion()==1)
|
||||
{
|
||||
const uint32_t S3 = (/* Pin is configured as PIO1_9 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT1 PIN9 (coords: 10) is configured as PIO1_9 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, S3);
|
||||
}
|
||||
else
|
||||
{
|
||||
const uint32_t S3 = (/* Pin is configured as PIO1_9 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled), only for A0 version */
|
||||
IOCON_PIO_ASW_DIS_EN);
|
||||
/* PORT1 PIN9 (coords: 10) is configured as PIO1_9 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_S3_PORT, BOARD_INITBUTTONSPINS_S3_PIN, S3);
|
||||
}
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitPins_Core0:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitPins_Core0
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitPins_Core0(void)
|
||||
{
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitI2SPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, mode: inactive, slew_rate: standard, invert: disabled,
|
||||
open_drain: disabled}
|
||||
- {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '21', peripheral: FLEXCOMM6, signal: SCK, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1,
|
||||
identifier: FC6_I2S_CLK, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '87', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitI2SPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitI2SPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t FC6_I2S_CLK = (/* Pin is configured as FC6_SCK */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN10 (coords: 21) is configured as FC6_SCK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_CLK_PORT, BOARD_INITI2SPINS_FC6_I2S_CLK_PIN, FC6_I2S_CLK);
|
||||
|
||||
const uint32_t FC7_I2S_WS = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_WS_PORT, BOARD_INITI2SPINS_FC7_I2S_WS_PIN, FC7_I2S_WS);
|
||||
|
||||
const uint32_t FC7_I2S_TX = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_TX_PORT, BOARD_INITI2SPINS_FC7_I2S_TX_PIN, FC7_I2S_TX);
|
||||
|
||||
const uint32_t FC7_I2S_SCK = (/* Pin is configured as FC7_SCK */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_SCK_PORT, BOARD_INITI2SPINS_FC7_I2S_SCK_PIN, FC7_I2S_SCK);
|
||||
|
||||
const uint32_t FC6_I2S_RX = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC2 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_RX_PORT, BOARD_INITI2SPINS_FC6_I2S_RX_PIN, FC6_I2S_RX);
|
||||
|
||||
const uint32_t FC6_I2S_WS = (/* Pin is configured as FC6_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC2 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN16 (coords: 87) is configured as FC6_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_WS_PORT, BOARD_INITI2SPINS_FC6_I2S_WS_PIN, FC6_I2S_WS);
|
||||
|
||||
const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SCL_PORT, BOARD_INITI2SPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL);
|
||||
|
||||
const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SDA_PORT, BOARD_INITI2SPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA);
|
||||
|
||||
const uint32_t MCLK = (/* Pin is configured as MCLK */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN31 (coords: 91) is configured as MCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_MCLK_PORT, BOARD_INITI2SPINS_MCLK_PIN, MCLK);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitACCELPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '58', peripheral: GPIO, signal: 'PIO1, 19', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF, direction: INPUT, mode: inactive,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitACCELPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitACCELPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO1 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio1);
|
||||
|
||||
gpio_pin_config_t ACCL_INTR_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_19 (pin 58) */
|
||||
GPIO_PinInit(BOARD_INITACCELPINS_ACCL_INTR_GPIO, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, &ACCL_INTR_config);
|
||||
|
||||
const uint32_t ACCL_INTR = (/* Pin is configured as PIO1_19 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is open (disabled) */
|
||||
IOCON_PIO_ASW_DI);
|
||||
/* PORT1 PIN19 (coords: 58) is configured as PIO1_19 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, ACCL_INTR);
|
||||
|
||||
const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SCL_PORT, BOARD_INITACCELPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL);
|
||||
|
||||
const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SDA_PORT, BOARD_INITACCELPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA);
|
||||
}
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
@@ -0,0 +1,435 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PIN_MUX_H_
|
||||
#define _PIN_MUX_H_
|
||||
|
||||
/*!
|
||||
* @addtogroup pin_mux
|
||||
* @{
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* API
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @brief Calls initialization functions.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootPins(void);
|
||||
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_29 (number 92), P8[2]/U6[13]/FC0_USART_RXD
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 29U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 29U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_30 (number 94), P8[3]/U6[12]/FC0_USART_TXD
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 30U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 30U)
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */
|
||||
#define IOCON_PIO_ASW_DIS_EN 0x00u /*!<@brief Analog switch is closed (enabled), only for A0 version */
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC6 0x06u /*!<@brief Selects pin function 6 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLDOWN 0x10u /*!<@brief Selects pull-down function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_11 (number 13), U14[4]/SWDCLK_TRGT
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 11U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 11U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_12 (number 12), U15[4]/D7/P7[2]/IF_SWDIO
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 12U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 12U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN 10U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN_MASK (1U << 10U)
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Enables digital function */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u
|
||||
/*!
|
||||
* @brief Selects pin function 7 */
|
||||
#define IOCON_PIO_FUNC7 0x07u
|
||||
/*!
|
||||
* @brief Input function is not inverted */
|
||||
#define IOCON_PIO_INV_DI 0x00u
|
||||
/*!
|
||||
* @brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u
|
||||
/*!
|
||||
* @brief Open drain is disabled */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u
|
||||
/*!
|
||||
* @brief Standard mode, output slew rate control is enabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO0_28_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 7. */
|
||||
#define PIO0_28_FUNC_ALT7 0x07u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO0_28_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_12_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_12_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_12_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_29_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_29_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_29_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_30_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_30_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_30_MODE_PULL_UP 0x02u
|
||||
|
||||
/*! @name PIO0_22 (number 78), P10[1]/USB0_VBUS
|
||||
@{ */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PIN 22U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PIN_MASK (1U << 22U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitUSBPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_4 (number 1), R78/P18[5]/LEDR/PWM_ARD
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN_MASK (1U << 4U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_PIN 4U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITLEDSPINS_LED_BLUE_PIN_MASK (1U << 4U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_6 (number 5), R80/P18[9]/LEDB/PWM_ARD
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN_MASK (1U << 6U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_PIN 6U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITLEDSPINS_LED_RED_PIN_MASK (1U << 6U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_7 (number 9), R79/P18[7]/LEDG/PWM_ARD
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN_MASK (1U << 7U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_PIN 7U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITLEDSPINS_LED_GREEN_PIN_MASK (1U << 7U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitLEDsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_DIS_EN 0x00u /*!<@brief Analog switch is closed (enabled), only for A0 version */
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_5 (number 88), S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITBUTTONSPINS_S1_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S1_GPIO_PIN_MASK (1U << 5U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITBUTTONSPINS_S1_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S1_PIN 5U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITBUTTONSPINS_S1_PIN_MASK (1U << 5U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_18 (number 64), S2/P18[16]/P24[2]/WAKE/GPIO
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITBUTTONSPINS_S2_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S2_GPIO_PIN_MASK (1U << 18U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITBUTTONSPINS_S2_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S2_PIN 18U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITBUTTONSPINS_S2_PIN_MASK (1U << 18U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_9 (number 10), S3/P18[1]/PIO1_9_GPIO_ARD
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITBUTTONSPINS_S3_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S3_GPIO_PIN_MASK (1U << 9U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITBUTTONSPINS_S3_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_S3_PIN 9U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITBUTTONSPINS_S3_PIN_MASK (1U << 9U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBUTTONsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitPins_Core0(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
|
||||
#define IOCON_PIO_FUNC2 0x02u /*!<@brief Selects pin function 2 */
|
||||
#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */
|
||||
#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_31 (number 91), P19[7]/P19[8]/PLU_IN0/GPIO
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_MCLK_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_MCLK_PIN 31U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_MCLK_PIN_MASK (1U << 31U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_21 (number 76), P17[14]/FC7_I2S_SCK
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_20 (number 74), P17[10]/FC7_I2S_TX
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_19 (number 90), P17[12]/FC7_I2S_WS
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN 19U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN 10U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN_MASK (1U << 10U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_13 (number 2), P17[20]/FC6_I2S_RX
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN 13U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_16 (number 87), P18[17]/SD1_PWR_EN
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN 16U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN_MASK (1U << 16U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitI2SPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
|
||||
#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD
|
||||
@{ */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD
|
||||
@{ */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_19 (number 58), U7[3]/P18[14]/PLU_OUT1/GPIO
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_GPIO_PIN_MASK (1U << 19U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PIN 19U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitACCELPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @}
|
||||
*/
|
||||
#endif /* _PIN_MUX_H_ */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
@@ -0,0 +1,12 @@
|
||||
set(MCU_VARIANT LPC55S69)
|
||||
set(MCU_CORE LPC55S69_cm33_core0)
|
||||
|
||||
set(JLINK_DEVICE LPC55S69)
|
||||
set(PYOCD_TARGET LPC55S69)
|
||||
set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69)
|
||||
|
||||
function(update_board TARGET)
|
||||
target_compile_definitions(${TARGET} PUBLIC
|
||||
CPU_LPC55S69JBD64_cm33_core0
|
||||
)
|
||||
endfunction()
|
||||
@@ -0,0 +1,59 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
/* metadata:
|
||||
name: MCU Link
|
||||
url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/mcu-link-debug-probe:MCU-LINK
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// LED
|
||||
#define LED_PORT BOARD_INITLEDSPINS_LED_PORT
|
||||
#define LED_PIN BOARD_INITLEDSPINS_LED_PIN
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
// WAKE button (Dummy, use unused pin
|
||||
#define BUTTON_PORT BOARD_INITBUTTONSPINS_BUTTON_PORT
|
||||
#define BUTTON_PIN BOARD_INITBUTTONSPINS_BUTTON_PIN
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
// UART
|
||||
#define UART_DEV USART0
|
||||
|
||||
// XTAL
|
||||
#define XTAL0_CLK_HZ (16 * 1000 * 1000U)
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,18 @@
|
||||
MCU_VARIANT = LPC55S69
|
||||
MCU_CORE = LPC55S69_cm33_core0
|
||||
RHPORT_DEVICE ?= 1
|
||||
|
||||
CFLAGS += -DCPU_LPC55S69JBD64_cm33_core0
|
||||
|
||||
SRC_C += \
|
||||
$(TOP)/$(BOARD_PATH)/board/clock_config.c \
|
||||
$(TOP)/$(BOARD_PATH)/board/pin_mux.c \
|
||||
$(TOP)/$(BOARD_PATH)/board/peripherals.c
|
||||
|
||||
INC += $(TOP)/$(BOARD_PATH)/board
|
||||
|
||||
JLINK_DEVICE = LPC55S69
|
||||
PYOCD_TARGET = LPC55S69
|
||||
|
||||
# flash using pyocd
|
||||
flash: flash-pyocd
|
||||
@@ -0,0 +1,328 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
/*
|
||||
* How to set up clock using clock driver functions:
|
||||
*
|
||||
* 1. Setup clock sources.
|
||||
*
|
||||
* 2. Set up wait states of the flash.
|
||||
*
|
||||
* 3. Set up all dividers.
|
||||
*
|
||||
* 4. Set up all selectors to provide selected clocks.
|
||||
*/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Clocks v18.0
|
||||
processor: LPC55S69
|
||||
package_id: LPC55S69JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S69
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_power.h"
|
||||
#include "fsl_clock.h"
|
||||
#include "clock_config.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
void BOARD_InitBootClocks(void)
|
||||
{
|
||||
BOARD_BootClockPLL150M();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockFRO12M **********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockFRO12M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 12 MHz}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockFRO12M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************* Configuration BOARD_BootClockFROHF96M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockFROHF96M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 96 MHz}
|
||||
settings:
|
||||
- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable}
|
||||
- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk}
|
||||
sources:
|
||||
- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockFROHF96M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */
|
||||
|
||||
POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL100M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockPLL100M
|
||||
outputs:
|
||||
- {id: System_clock.outFreq, value: 100 MHz}
|
||||
settings:
|
||||
- {id: PLL0_Mode, value: Normal}
|
||||
- {id: ENABLE_CLKIN_ENA, value: Enabled}
|
||||
- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled}
|
||||
- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS}
|
||||
- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true}
|
||||
- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true}
|
||||
- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true}
|
||||
sources:
|
||||
- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockPLL100M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
/*!< Configure XTAL32M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */
|
||||
CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */
|
||||
SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */
|
||||
|
||||
POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up PLL */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG);
|
||||
const pll_setup_t pll0Setup = {
|
||||
.pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U),
|
||||
.pllndec = SYSCON_PLL0NDEC_NDIV(4U),
|
||||
.pllpdec = SYSCON_PLL0PDEC_PDIV(2U),
|
||||
.pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)},
|
||||
.pllRate = 100000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL150M *********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockPLL150M
|
||||
called_from_default_init: true
|
||||
outputs:
|
||||
- {id: FXCOM0_clock.outFreq, value: 48 MHz}
|
||||
- {id: System_clock.outFreq, value: 144 MHz}
|
||||
- {id: USB0_clock.outFreq, value: 48 MHz}
|
||||
- {id: USB1_PHY_clock.outFreq, value: 16 MHz}
|
||||
settings:
|
||||
- {id: PLL0_Mode, value: Normal}
|
||||
- {id: PLL1_Mode, value: Normal}
|
||||
- {id: ENABLE_CLKIN_ENA, value: Enabled}
|
||||
- {id: ENABLE_PLL_USB_OUT, value: Enabled}
|
||||
- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled}
|
||||
- {id: SYSCON.FCCLKSEL0.sel, value: SYSCON.PLL0DIV}
|
||||
- {id: SYSCON.FRGCTRL0_DIV.scale, value: '400'}
|
||||
- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL1_BYPASS}
|
||||
- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL0DIV.scale, value: '2'}
|
||||
- {id: SYSCON.PLL0M_MULT.scale, value: '150', locked: true}
|
||||
- {id: SYSCON.PLL0N_DIV.scale, value: '8', locked: true}
|
||||
- {id: SYSCON.PLL0_PDEC.scale, value: '2', locked: true}
|
||||
- {id: SYSCON.PLL1CLKSEL.sel, value: SYSCON.CLK_IN_EN}
|
||||
- {id: SYSCON.PLL1M_MULT.scale, value: '18'}
|
||||
- {id: SYSCON.PLL1_PDEC.scale, value: '2'}
|
||||
- {id: SYSCON.USB0CLKDIV.scale, value: '3'}
|
||||
- {id: SYSCON.USB0CLKSEL.sel, value: SYSCON.MAINCLKSELB}
|
||||
sources:
|
||||
- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockPLL150M(void)
|
||||
{
|
||||
#ifndef SDK_SECONDARY_CORE
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Configure FRO192M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */
|
||||
CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */
|
||||
|
||||
/*!< Configure XTAL32M */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */
|
||||
CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */
|
||||
SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */
|
||||
ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_PLL_USB_OUT_MASK; /* Enable clk_in to HS USB */
|
||||
|
||||
POWER_SetVoltageForFreq(144000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(144000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up PLL */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG);
|
||||
const pll_setup_t pll0Setup = {
|
||||
.pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(31U),
|
||||
.pllndec = SYSCON_PLL0NDEC_NDIV(8U),
|
||||
.pllpdec = SYSCON_PLL0PDEC_PDIV(1U),
|
||||
.pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(150U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)},
|
||||
.pllRate = 150000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */
|
||||
|
||||
/*!< Set up PLL1 */
|
||||
CLOCK_AttachClk(kEXT_CLK_to_PLL1); /*!< Switch PLL1CLKSEL to EXT_CLK */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_PLL1); /* Ensure PLL is on */
|
||||
const pll_setup_t pll1Setup = {
|
||||
.pllctrl = SYSCON_PLL1CTRL_CLKEN_MASK | SYSCON_PLL1CTRL_SELI(11U) | SYSCON_PLL1CTRL_SELP(5U),
|
||||
.pllndec = SYSCON_PLL1NDEC_NDIV(1U),
|
||||
.pllpdec = SYSCON_PLL1PDEC_PDIV(1U),
|
||||
.pllmdec = SYSCON_PLL1MDEC_MDIV(18U),
|
||||
.pllRate = 144000000U,
|
||||
.flags = PLL_SETUPFLAG_WAITLOCK
|
||||
};
|
||||
CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */
|
||||
|
||||
/*!< Set up dividers */
|
||||
#if FSL_CLOCK_DRIVER_VERSION >= MAKE_VERSION(2, 3, 4)
|
||||
CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 144U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */
|
||||
#else
|
||||
CLOCK_SetClkDiv(kCLOCK_DivFlexFrg0, 37120U, false); /*!< Set DIV to value 0xFF and MULT to value 144U in related FLEXFRGCTRL register */
|
||||
#endif
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 0U, true); /*!< Reset USB0CLKDIV divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 3U, false); /*!< Set USB0CLKDIV divider to value 3 */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 0U, true); /*!< Reset PLL0DIV divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivPll0Clk, 2U, false); /*!< Set PLL0DIV divider to value 2 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */
|
||||
CLOCK_AttachClk(kMAIN_CLK_to_USB0_CLK); /*!< Switch USB0_CLK to MAIN_CLK */
|
||||
CLOCK_AttachClk(kPLL0_DIV_to_FLEXCOMM0); /*!< Switch FLEXCOMM0 to PLL0_DIV */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK;
|
||||
#endif
|
||||
}
|
||||
@@ -0,0 +1,290 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _CLOCK_CONFIG_H_
|
||||
#define _CLOCK_CONFIG_H_
|
||||
|
||||
#include "fsl_common.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
#define BOARD_XTAL0_CLK_HZ 16000000U /*!< Board xtal frequency in Hz */
|
||||
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes default configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootClocks(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockFRO12M **********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKFRO12M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFRO12M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFRO12M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKFRO12M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKFRO12M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockFRO12M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockFRO12M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************* Configuration BOARD_BootClockFROHF96M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKFROHF96M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockFROHF96M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockFROHF96M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL100M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK 100000000U /*!< Core clock frequency: 100000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKPLL100M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM0_CLOCK 0UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL100M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL100M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL100M_SYSTEM_CLOCK 100000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKPLL100M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKPLL100M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKPLL100M_USB1_PHY_CLOCK 0UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL100M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKPLL100M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockPLL100M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockPLL100M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
******************** Configuration BOARD_BootClockPLL150M *********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK 144000000U /*!< Core clock frequency: 144000000Hz */
|
||||
|
||||
|
||||
/* Clock outputs (values are in Hz): */
|
||||
#define BOARD_BOOTCLOCKPLL150M_ASYNCADC_CLOCK 0UL /* Clock consumers of ASYNCADC_clock output : ADC0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER3_CLOCK 0UL /* Clock consumers of CTIMER3_clock output : CTIMER3 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_CTIMER4_CLOCK 0UL /* Clock consumers of CTIMER4_clock output : CTIMER4 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM0_CLOCK 48000000UL /* Clock consumers of FXCOM0_clock output : FLEXCOMM0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM1_CLOCK 0UL /* Clock consumers of FXCOM1_clock output : FLEXCOMM1 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM2_CLOCK 0UL /* Clock consumers of FXCOM2_clock output : FLEXCOMM2 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM3_CLOCK 0UL /* Clock consumers of FXCOM3_clock output : FLEXCOMM3 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM4_CLOCK 0UL /* Clock consumers of FXCOM4_clock output : FLEXCOMM4 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM5_CLOCK 0UL /* Clock consumers of FXCOM5_clock output : FLEXCOMM5 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM6_CLOCK 0UL /* Clock consumers of FXCOM6_clock output : FLEXCOMM6 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_FXCOM7_CLOCK 0UL /* Clock consumers of FXCOM7_clock output : FLEXCOMM7 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_HSLSPI_CLOCK 0UL /* Clock consumers of HSLSPI_clock output : FLEXCOMM8 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_MCLK_CLOCK 0UL /* Clock consumers of MCLK_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_OSC32KHZ_CLOCK 0UL /* Clock consumers of OSC32KHZ_clock output : FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL150M_OSTIMER32KHZ_CLOCK 0UL /* Clock consumers of OSTIMER32KHZ_clock output : OSTIMER */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLUCLKIN_CLOCK 0UL /* Clock consumers of PLUCLKIN_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_12MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_12MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_PLU_GLITCH_1MHZ_CLOCK 0UL /* Clock consumers of PLU_GLITCH_1MHz_clock output : PLU */
|
||||
#define BOARD_BOOTCLOCKPLL150M_RTC1HZ_CLOCK 0UL /* Clock consumers of RTC1HZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_RTC1KHZ_CLOCK 0UL /* Clock consumers of RTC1KHZ_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SCT_CLOCK 0UL /* Clock consumers of SCT_clock output : SCT0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SDIO_CLOCK 0UL /* Clock consumers of SDIO_clock output : SDIF */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTICK0_CLOCK 0UL /* Clock consumers of SYSTICK0_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTICK1_CLOCK 0UL /* Clock consumers of SYSTICK1_clock output : N/A */
|
||||
#define BOARD_BOOTCLOCKPLL150M_SYSTEM_CLOCK 144000000UL /* Clock consumers of System_clock output : ADC0, ANACTRL, CASPER, CRC_ENGINE, CTIMER0, CTIMER1, CTIMER2, CTIMER3, CTIMER4, DMA0, DMA1, FLEXCOMM0, FLEXCOMM1, FLEXCOMM2, FLEXCOMM3, FLEXCOMM4, FLEXCOMM5, FLEXCOMM6, FLEXCOMM7, FLEXCOMM8, GINT0, GINT1, GPIO, INPUTMUX, IOCON, MAILBOX, MRT0, OSTIMER, PINT, PLU, PUF, SCT0, SDIF, SECGPIO, SECPINT, SWD, SYSCTL, USB0, USBFSH, USBHSD, USBHSH, USBPHY, UTICK0, WWDT */
|
||||
#define BOARD_BOOTCLOCKPLL150M_TRACE_CLOCK 0UL /* Clock consumers of TRACE_clock output : SWD */
|
||||
#define BOARD_BOOTCLOCKPLL150M_USB0_CLOCK 48000000UL /* Clock consumers of USB0_clock output : USB0, USBFSH */
|
||||
#define BOARD_BOOTCLOCKPLL150M_USB1_PHY_CLOCK 16000000UL /* Clock consumers of USB1_PHY_clock output : USBHSD, USBHSH, USBPHY */
|
||||
#define BOARD_BOOTCLOCKPLL150M_UTICK_CLOCK 0UL /* Clock consumers of UTICK_clock output : UTICK0 */
|
||||
#define BOARD_BOOTCLOCKPLL150M_WDT_CLOCK 0UL /* Clock consumers of WDT_clock output : WWDT */
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockPLL150M configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockPLL150M(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
#endif /* _CLOCK_CONFIG_H_ */
|
||||
@@ -0,0 +1,160 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Peripherals v15.0
|
||||
processor: LPC55S69
|
||||
package_id: LPC55S69JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S69
|
||||
functionalGroups:
|
||||
- name: BOARD_InitPeripherals_cm33_core0
|
||||
UUID: 61d0725d-b300-49cb-9c66-b5edfbf8ffc1
|
||||
called_from_default_init: true
|
||||
selectedCore: cm33_core0
|
||||
- name: BOARD_InitPeripherals_cm33_core1
|
||||
UUID: e2041cd4-ebb6-45a5-807f-e0c2dc047d48
|
||||
selectedCore: cm33_core1
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'system'
|
||||
- type_id: 'system'
|
||||
- global_system_definitions:
|
||||
- user_definitions: ''
|
||||
- user_includes: ''
|
||||
- global_init: ''
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'uart_cmsis_common'
|
||||
- type_id: 'uart_cmsis_common'
|
||||
- global_USART_CMSIS_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'gpio_adapter_common'
|
||||
- type_id: 'gpio_adapter_common'
|
||||
- global_gpio_adapter_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "peripherals.h"
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitPeripherals_cm33_core0 functional group
|
||||
**********************************************************************************************************************/
|
||||
/***********************************************************************************************************************
|
||||
* DEBUG_UART initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'DEBUG_UART'
|
||||
- type: 'flexcomm_usart'
|
||||
- mode: 'polling'
|
||||
- custom_name_enabled: 'true'
|
||||
- type_id: 'flexcomm_usart_2.2.0'
|
||||
- functional_group: 'BOARD_InitPeripherals_cm33_core0'
|
||||
- peripheral: 'FLEXCOMM0'
|
||||
- config_sets:
|
||||
- usartConfig_t:
|
||||
- usartConfig:
|
||||
- clockSource: 'FXCOMFunctionClock'
|
||||
- clockSourceFreq: 'ClocksTool_DefaultInit'
|
||||
- baudRate_Bps: '115200'
|
||||
- syncMode: 'kUSART_SyncModeDisabled'
|
||||
- parityMode: 'kUSART_ParityDisabled'
|
||||
- stopBitCount: 'kUSART_OneStopBit'
|
||||
- bitCountPerChar: 'kUSART_8BitsPerChar'
|
||||
- loopback: 'false'
|
||||
- txWatermark: 'kUSART_TxFifo0'
|
||||
- rxWatermark: 'kUSART_RxFifo1'
|
||||
- enableRx: 'true'
|
||||
- enableTx: 'true'
|
||||
- clockPolarity: 'kUSART_RxSampleOnFallingEdge'
|
||||
- enableContinuousSCLK: 'false'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
const usart_config_t DEBUG_UART_config = {
|
||||
.baudRate_Bps = 115200UL,
|
||||
.syncMode = kUSART_SyncModeDisabled,
|
||||
.parityMode = kUSART_ParityDisabled,
|
||||
.stopBitCount = kUSART_OneStopBit,
|
||||
.bitCountPerChar = kUSART_8BitsPerChar,
|
||||
.loopback = false,
|
||||
.txWatermark = kUSART_TxFifo0,
|
||||
.rxWatermark = kUSART_RxFifo1,
|
||||
.enableRx = true,
|
||||
.enableTx = true,
|
||||
.enableMode32k = false,
|
||||
.clockPolarity = kUSART_RxSampleOnFallingEdge,
|
||||
.enableContinuousSCLK = false
|
||||
};
|
||||
|
||||
static void DEBUG_UART_init(void) {
|
||||
/* Reset FLEXCOMM device */
|
||||
RESET_PeripheralReset(kFC0_RST_SHIFT_RSTn);
|
||||
USART_Init(DEBUG_UART_PERIPHERAL, &DEBUG_UART_config, DEBUG_UART_CLOCK_SOURCE);
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* NVIC initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'NVIC'
|
||||
- type: 'nvic'
|
||||
- mode: 'general'
|
||||
- custom_name_enabled: 'false'
|
||||
- type_id: 'nvic'
|
||||
- functional_group: 'BOARD_InitPeripherals_cm33_core0'
|
||||
- peripheral: 'NVIC'
|
||||
- config_sets:
|
||||
- nvic:
|
||||
- interrupt_table: []
|
||||
- interrupts: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/* Empty initialization function (commented out)
|
||||
static void NVIC_init(void) {
|
||||
} */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitPeripherals_cm33_core0(void)
|
||||
{
|
||||
/* Initialize components */
|
||||
DEBUG_UART_init();
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void)
|
||||
{
|
||||
BOARD_InitPeripherals_cm33_core0();
|
||||
}
|
||||
@@ -0,0 +1,57 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PERIPHERALS_H_
|
||||
#define _PERIPHERALS_H_
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_reset.h"
|
||||
#include "fsl_usart.h"
|
||||
#include "fsl_clock.h"
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Definitions
|
||||
**********************************************************************************************************************/
|
||||
/* Definitions for BOARD_InitPeripherals_cm33_core0 functional group */
|
||||
/* Definition of peripheral ID */
|
||||
#define DEBUG_UART_PERIPHERAL ((USART_Type *)FLEXCOMM0)
|
||||
/* Definition of the clock source frequency */
|
||||
#define DEBUG_UART_CLOCK_SOURCE 48000000UL
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Global variables
|
||||
**********************************************************************************************************************/
|
||||
extern const usart_config_t DEBUG_UART_config;
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
|
||||
void BOARD_InitPeripherals_cm33_core0(void);
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _PERIPHERALS_H_ */
|
||||
@@ -0,0 +1,839 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Pins v17.0
|
||||
processor: LPC55S69
|
||||
package_id: LPC55S69JBD100
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 25.09.10
|
||||
board: LPCXpresso55S69
|
||||
expansion_headers:
|
||||
- id: lpc_style_arduino
|
||||
name: LPCXpresso V3 (Arduino compatible)
|
||||
connectors:
|
||||
- id: C1
|
||||
name: P16
|
||||
pins:
|
||||
- {id: 8, name: 3.3V, external_signal_types: power_supply_3.3V}
|
||||
- {id: 10, name: RESET, pin_num: '32', pin_signal: RESETN}
|
||||
- {id: 12, name: 3.3V, external_signal_types: power_supply_3.3V}
|
||||
- {id: 14, name: 5V, external_signal_types: power_supply_5V}
|
||||
- {id: 16, name: GND, external_signal_types: ground}
|
||||
- {id: 18, name: GND, external_signal_types: ground}
|
||||
- {id: 20, name: 5V, external_signal_types: power_supply_5V}
|
||||
- id: C2
|
||||
name: P17
|
||||
pins:
|
||||
- {id: 1, name: D15, pin_num: '4', pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2}
|
||||
- {id: 3, name: D14, pin_num: '30', pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3}
|
||||
- {id: 5, name: 3.3V, external_signal_types: power_supply_3.3V}
|
||||
- {id: 6, pin_num: '93', pin_signal: PIO1_11/FC1_TXD_SCL_MISO_WS/CT_INP5/USB0_VBUS}
|
||||
- {id: 7, name: GND, external_signal_types: ground}
|
||||
- {id: 8, pin_num: '88', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5}
|
||||
- {id: 9, name: D13, pin_num: '61', pin_signal: PIO1_2/CTIMER0_MAT3/SCT_GPI6/HS_SPI_SCK/USB1_PORTPWRN/PLU_OUT5}
|
||||
- {id: 10, pin_num: '74', pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS}
|
||||
- {id: 11, name: D12, pin_num: '62', pin_signal: PIO1_3/SCT0_OUT4/HS_SPI_MISO/USB0_PORTPWRN/PLU_OUT6}
|
||||
- {id: 12, pin_num: '90', pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19}
|
||||
- {id: 13, name: D11, pin_num: '60', pin_signal: PIO0_26/FC2_RXD_SDA_MOSI_DATA/CLKOUT/CT_INP14/SCT0_OUT5/USB0_IDVALUE/FC0_SCK/HS_SPI_MOSI/SECURE_GPIO0_26}
|
||||
- {id: 14, pin_num: '76', pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21}
|
||||
- {id: 15, name: D10, pin_num: '59', pin_signal: PIO1_1/FC3_RXD_SDA_MOSI_DATA/CT_INP3/SCT_GPI5/HS_SPI_SSEL1/USB1_OVERCURRENTN/PLU_OUT4}
|
||||
- {id: 16, pin_num: '85', pin_signal: PIO1_27/FC2_RTS_SCL_SSEL1/SD0_D4/CTIMER0_MAT3/CLKOUT/PLU_IN4}
|
||||
- {id: 17, name: D9, pin_num: '31', pin_signal: PIO1_5/FC0_RXD_SDA_MOSI_DATA/SD0_D2/CTIMER2_MAT0/SCT_GPI0}
|
||||
- {id: 18, pin_num: '73', pin_signal: PIO1_28/FC7_SCK/SD0_D5/CT_INP2/PLU_IN3}
|
||||
- {id: 19, name: D8, pin_num: '24', pin_signal: PIO1_8/FC0_CTS_SDA_SSEL0/SD0_CLK/SCT0_OUT1/FC4_SSEL2/ADC0_4}
|
||||
- {id: 20, pin_num: '2', pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N}
|
||||
- id: C3
|
||||
name: P18
|
||||
pins:
|
||||
- {id: 1, name: D7, pin_num: '10', pin_signal: PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12}
|
||||
- {id: 2, pin_num: '7', pin_signal: PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1}
|
||||
- {id: 3, name: D6, pin_num: '40', pin_signal: PIO1_10/FC1_RXD_SDA_MOSI_DATA/CTIMER1_MAT0/SCT0_OUT3}
|
||||
- {id: 4, pin_num: '57', pin_signal: PIO1_14/UTICK_CAP2/CTIMER1_MAT2/FC5_CTS_SDA_SSEL0/USB0_LEDN/SD1_CMD/ACMP0_D}
|
||||
- {id: 5, name: D5, pin_num: '1', pin_signal: PIO1_4/FC0_SCK/SD0_D0/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A}
|
||||
- {id: 6, pin_num: '77', pin_signal: PIO1_25/FC2_TXD_SCL_MISO_WS/SCT0_OUT2/SD1_D0/UTICK_CAP0/PLU_CLKIN}
|
||||
- {id: 7, name: D4-LED_GREEN, pin_num: '9', pin_signal: PIO1_7/FC0_RTS_SCL_SSEL1/SD0_D1/CTIMER2_MAT2/SCT_GPI4}
|
||||
- {id: 8, pin_num: '42', pin_signal: PIO1_23/FC2_SCK/SCT0_OUT0/SD1_D3/FC3_SSEL2/PLU_OUT5}
|
||||
- {id: 10, pin_num: '3', pin_signal: PIO1_24/FC2_RXD_SDA_MOSI_DATA/SCT0_OUT1/SD1_D1/FC3_SSEL3/PLU_OUT6}
|
||||
- {id: 11, name: D2, pin_num: '22', pin_signal: PIO0_15/FC6_CTS_SDA_SSEL0/UTICK_CAP2/CT_INP16/SCT0_OUT2/SD0_WR_PRT/SECURE_GPIO0_15/ADC0_2}
|
||||
- {id: 12, pin_num: '82', pin_signal: PIO1_15/UTICK_CAP3/CT_INP7/FC5_RTS_SCL_SSEL1/FC4_RTS_SCL_SSEL1/SD1_D2}
|
||||
- {id: 13, name: D1, pin_num: '27', pin_signal: PIO0_27/FC2_TXD_SCL_MISO_WS/CTIMER3_MAT2/SCT0_OUT6/FC7_RXD_SDA_MOSI_DATA/PLU_OUT0/SECURE_GPIO0_27}
|
||||
- {id: 14, pin_num: '58', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF}
|
||||
- {id: 15, name: D0, pin_num: '3', pin_signal: PIO1_24/FC2_RXD_SDA_MOSI_DATA/SCT0_OUT1/SD1_D1/FC3_SSEL3/PLU_OUT6}
|
||||
- {id: 16, pin_num: '64', pin_signal: PIO1_18/SD1_POW_EN/SCT0_OUT5/PLU_OUT0}
|
||||
- {id: 17, pin_num: '87', pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD}
|
||||
- {id: 18, pin_num: '68', pin_signal: PIO1_26/FC2_CTS_SDA_SSEL0/SCT0_OUT3/CT_INP3/UTICK_CAP1/HS_SPI_SSEL3/PLU_IN5}
|
||||
- {id: 19, pin_num: '43', pin_signal: PIO1_17/FC6_RTS_SCL_SSEL1/SCT0_OUT4/SD1_CARD_INT_N/SD1_CARD_DET_N}
|
||||
- {id: 20, pin_num: '56', pin_signal: PIO0_18/FC4_CTS_SDA_SSEL0/SD0_WR_PRT/CTIMER1_MAT0/SCT0_OUT1/PLU_IN3/SECURE_GPIO0_18/ACMP0_C}
|
||||
- id: C4
|
||||
name: P19
|
||||
pins:
|
||||
- {id: 2, name: A0, pin_num: '14', pin_signal: PIO0_16/FC4_TXD_SCL_MISO_WS/CLKOUT/CT_INP4/SECURE_GPIO0_16/ADC0_8}
|
||||
- {id: 4, name: A1, pin_num: '20', pin_signal: PIO0_23/MCLK/CTIMER1_MAT2/CTIMER3_MAT3/SCT0_OUT4/FC0_CTS_SDA_SSEL0/SD1_D1/SECURE_GPIO0_23/ADC0_0}
|
||||
- {id: 6, name: A2, pin_num: '54', pin_signal: PIO0_0/FC3_SCK/CTIMER0_MAT0/SCT_GPI0/SD1_CARD_INT_N/SECURE_GPIO0_0/ACMP0_A}
|
||||
- {id: 7, pin_num: '91', pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0}
|
||||
- {id: 8, name: A3, pin_num: '91', pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0}
|
||||
- {id: 9, pin_num: '71', pin_signal: PIO0_13/FC1_CTS_SDA_SSEL0/UTICK_CAP0/CT_INP0/SCT_GPI0/FC1_RXD_SDA_MOSI_DATA/PLU_IN0/SECURE_GPIO0_13}
|
||||
- {id: 10, name: A4, pin_num: '71', pin_signal: PIO0_13/FC1_CTS_SDA_SSEL0/UTICK_CAP0/CT_INP0/SCT_GPI0/FC1_RXD_SDA_MOSI_DATA/PLU_IN0/SECURE_GPIO0_13}
|
||||
- {id: 11, pin_num: '72', pin_signal: PIO0_14/FC1_RTS_SCL_SSEL1/UTICK_CAP1/CT_INP1/SCT_GPI1/FC1_TXD_SCL_MISO_WS/PLU_IN1/SECURE_GPIO0_14}
|
||||
- {id: 12, name: A5, pin_num: '72', pin_signal: PIO0_14/FC1_RTS_SCL_SSEL1/UTICK_CAP1/CT_INP1/SCT_GPI1/FC1_TXD_SCL_MISO_WS/PLU_IN1/SECURE_GPIO0_14}
|
||||
pin_labels:
|
||||
- {pin_num: '7', pin_signal: PIO0_1/FC3_CTS_SDA_SSEL0/CT_INP0/SCT_GPI1/SD1_CLK/CMP0_OUT/SECURE_GPIO0_1, label: 'P18[2]/SD1_CLK', identifier: LED_RED}
|
||||
- {pin_num: '88', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, label: 'S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1',
|
||||
identifier: LED}
|
||||
- {pin_num: '11', pin_signal: PIO1_0/FC0_RTS_SCL_SSEL1/SD0_D3/CT_INP2/SCT_GPI4/PLU_OUT3/ADC0_11, label: 'U20[2]/SD0_D3', identifier: BUTTON}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "fsl_iocon.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBootPins
|
||||
* Description : Calls initialization functions.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitBootPins(void)
|
||||
{
|
||||
BOARD_InitDEBUG_UARTPins();
|
||||
BOARD_InitUSBPins();
|
||||
BOARD_InitLEDsPins();
|
||||
BOARD_InitBUTTONsPins();
|
||||
BOARD_InitPins_Core0();
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitDEBUG_UARTPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitDEBUG_UARTPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitDEBUG_UARTPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t DEBUG_UART_RX = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, DEBUG_UART_RX);
|
||||
|
||||
const uint32_t DEBUG_UART_TX = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, DEBUG_UART_TX);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitSWD_DEBUGPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '13', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9, mode: pullDown,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '12', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_12/FC3_TXD_SCL_MISO_WS/SD1_BACKEND_PWR/FREQME_GPIO_CLK_B/SCT_GPI7/SD0_POW_EN/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '21', peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, identifier: DEBUG_SWD_SWO,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitSWD_DEBUGPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitSWD_DEBUGPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t DEBUG_SWD_SWO = (/* Pin is configured as SWO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is open (disabled) */
|
||||
IOCON_PIO_ASW_DI);
|
||||
/* PORT0 PIN10 (coords: 21) is configured as SWO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN, DEBUG_SWD_SWO);
|
||||
|
||||
if (Chip_GetVersion()==1)
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-down function */
|
||||
IOCON_PIO_MODE_PULLDOWN |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN11 (coords: 13) is configured as SWCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK);
|
||||
}
|
||||
else
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDCLK = (/* Pin is configured as SWCLK */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-down function */
|
||||
IOCON_PIO_MODE_PULLDOWN |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled), only for A0 version */
|
||||
IOCON_PIO_ASW_DIS_EN);
|
||||
/* PORT0 PIN11 (coords: 13) is configured as SWCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, DEBUG_SWD_SWDCLK);
|
||||
}
|
||||
|
||||
if (Chip_GetVersion()==1)
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN12 (coords: 12) is configured as SWDIO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO);
|
||||
}
|
||||
else
|
||||
{
|
||||
const uint32_t DEBUG_SWD_SWDIO = (/* Pin is configured as SWDIO */
|
||||
IOCON_PIO_FUNC6 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled), only for A0 version */
|
||||
IOCON_PIO_ASW_DIS_EN);
|
||||
/* PORT0 PIN12 (coords: 12) is configured as SWDIO */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, DEBUG_SWD_SWDIO);
|
||||
}
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitUSBPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '97', peripheral: USBFSH, signal: USB_DP, pin_signal: USB0_DP}
|
||||
- {pin_num: '98', peripheral: USBFSH, signal: USB_DM, pin_signal: USB0_DM}
|
||||
- {pin_num: '78', peripheral: USBFSH, signal: USB_VBUS, pin_signal: PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/SD1_D0/PLU_OUT7/SECURE_GPIO0_22,
|
||||
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '35', peripheral: USBHSH, signal: USB_DM, pin_signal: USB1_DM}
|
||||
- {pin_num: '34', peripheral: USBHSH, signal: USB_DP, pin_signal: USB1_DP}
|
||||
- {pin_num: '36', peripheral: USBHSH, signal: USB_VBUS, pin_signal: USB1_VBUS}
|
||||
- {pin_num: '65', peripheral: USBHSH, signal: USB_OVERCURRENTN, pin_signal: PIO1_30/FC7_TXD_SCL_MISO_WS/SD0_D7/SCT_GPI7/USB1_OVERCURRENTN/USB1_LEDN/PLU_IN1, mode: pullUp}
|
||||
- {pin_num: '66', peripheral: USBFSH, signal: USB_OVERCURRENTN, pin_signal: PIO0_28/FC0_SCK/SD1_CMD/CT_INP11/SCT0_OUT7/USB0_OVERCURRENTN/PLU_OUT1/SECURE_GPIO0_28,
|
||||
mode: pullUp}
|
||||
- {pin_num: '67', peripheral: USBFSH, signal: USB_PORTPWRN, pin_signal: PIO1_12/FC6_SCK/CTIMER1_MAT1/USB0_PORTPWRN/HS_SPI_SSEL2, mode: pullUp}
|
||||
- {pin_num: '80', peripheral: USBHSH, signal: USB_PORTPWRN, pin_signal: PIO1_29/FC7_RXD_SDA_MOSI_DATA/SD0_D6/SCT_GPI6/USB1_PORTPWRN/USB1_FRAME/PLU_IN2, mode: pullUp}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitUSBPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitUSBPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t USB0_VBUS = (/* Pin is configured as USB0_VBUS */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN22 (coords: 78) is configured as USB0_VBUS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITUSBPINS_USB0_VBUS_PORT, BOARD_INITUSBPINS_USB0_VBUS_PIN, USB0_VBUS);
|
||||
|
||||
IOCON->PIO[0][28] = ((IOCON->PIO[0][28] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT028 (pin 66) is configured as USB0_OVERCURRENTN. */
|
||||
| IOCON_PIO_FUNC(PIO0_28_FUNC_ALT7)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO0_28_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO0_28_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][12] = ((IOCON->PIO[1][12] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT112 (pin 67) is configured as USB0_PORTPWRN. */
|
||||
| IOCON_PIO_FUNC(PIO1_12_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_12_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_12_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][29] = ((IOCON->PIO[1][29] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT129 (pin 80) is configured as USB1_PORTPWRN. */
|
||||
| IOCON_PIO_FUNC(PIO1_29_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_29_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_29_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[1][30] = ((IOCON->PIO[1][30] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT130 (pin 65) is configured as USB1_OVERCURRENTN. */
|
||||
| IOCON_PIO_FUNC(PIO1_30_FUNC_ALT4)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_30_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_30_DIGIMODE_DIGITAL));
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitLEDsPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '88', peripheral: GPIO, signal: 'PIO0, 5', pin_signal: PIO0_5/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5, direction: OUTPUT,
|
||||
gpio_init_state: 'true', mode: pullUp}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitLEDsPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitLEDsPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO0 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio0);
|
||||
|
||||
gpio_pin_config_t LED_config = {
|
||||
.pinDirection = kGPIO_DigitalOutput,
|
||||
.outputLogic = 1U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO0_5 (pin 88) */
|
||||
GPIO_PinInit(BOARD_INITLEDSPINS_LED_GPIO, BOARD_INITLEDSPINS_LED_PORT, BOARD_INITLEDSPINS_LED_PIN, &LED_config);
|
||||
|
||||
IOCON->PIO[0][5] = ((IOCON->PIO[0][5] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT05 (pin 88) is configured as PIO0_5. */
|
||||
| IOCON_PIO_FUNC(PIO0_5_FUNC_ALT0)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO0_5_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO0_5_DIGIMODE_DIGITAL));
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitBUTTONsPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '32', peripheral: SYSCON, signal: RESET, pin_signal: RESETN}
|
||||
- {pin_num: '11', peripheral: GPIO, signal: 'PIO1, 0', pin_signal: PIO1_0/FC0_RTS_SCL_SSEL1/SD0_D3/CT_INP2/SCT_GPI4/PLU_OUT3/ADC0_11, direction: INPUT, mode: pullUp}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBUTTONsPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitBUTTONsPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO1 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio1);
|
||||
|
||||
gpio_pin_config_t BUTTON_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_0 (pin 11) */
|
||||
GPIO_PinInit(BOARD_INITBUTTONSPINS_BUTTON_GPIO, BOARD_INITBUTTONSPINS_BUTTON_PORT, BOARD_INITBUTTONSPINS_BUTTON_PIN, &BUTTON_config);
|
||||
|
||||
if (Chip_GetVersion()==1)
|
||||
{
|
||||
IOCON->PIO[1][0] = ((IOCON->PIO[1][0] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT10 (pin 11) is configured as PIO1_0. */
|
||||
| IOCON_PIO_FUNC(PIO1_0_FUNC_ALT0)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_0_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_0_DIGIMODE_DIGITAL));
|
||||
}
|
||||
else
|
||||
{
|
||||
IOCON->PIO[1][0] = ((IOCON->PIO[1][0] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_MODE_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT10 (pin 11) is configured as PIO1_0. */
|
||||
| IOCON_PIO_FUNC(PIO1_0_FUNC_ALT0)
|
||||
|
||||
/* Selects function mode (on-chip pull-up/pull-down resistor control).
|
||||
* : Pull-up.
|
||||
* Pull-up resistor enabled. */
|
||||
| IOCON_PIO_MODE(PIO1_0_MODE_PULL_UP)
|
||||
|
||||
/* Select Digital mode.
|
||||
* : Enable Digital mode.
|
||||
* Digital input is enabled. */
|
||||
| IOCON_PIO_DIGIMODE(PIO1_0_DIGIMODE_DIGITAL));
|
||||
}
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitPins_Core0:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitPins_Core0
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitPins_Core0(void)
|
||||
{
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitI2SPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, mode: inactive, slew_rate: standard, invert: disabled,
|
||||
open_drain: disabled}
|
||||
- {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '21', peripheral: FLEXCOMM6, signal: SCK, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1,
|
||||
identifier: FC6_I2S_CLK, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
||||
- {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N,
|
||||
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '87', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitI2SPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitI2SPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
const uint32_t FC6_I2S_CLK = (/* Pin is configured as FC6_SCK */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is closed (enabled) */
|
||||
IOCON_PIO_ASW_EN);
|
||||
/* PORT0 PIN10 (coords: 21) is configured as FC6_SCK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_CLK_PORT, BOARD_INITI2SPINS_FC6_I2S_CLK_PIN, FC6_I2S_CLK);
|
||||
|
||||
const uint32_t FC7_I2S_WS = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_WS_PORT, BOARD_INITI2SPINS_FC7_I2S_WS_PIN, FC7_I2S_WS);
|
||||
|
||||
const uint32_t FC7_I2S_TX = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_TX_PORT, BOARD_INITI2SPINS_FC7_I2S_TX_PIN, FC7_I2S_TX);
|
||||
|
||||
const uint32_t FC7_I2S_SCK = (/* Pin is configured as FC7_SCK */
|
||||
IOCON_PIO_FUNC7 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC7_I2S_SCK_PORT, BOARD_INITI2SPINS_FC7_I2S_SCK_PIN, FC7_I2S_SCK);
|
||||
|
||||
const uint32_t FC6_I2S_RX = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC2 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_RX_PORT, BOARD_INITI2SPINS_FC6_I2S_RX_PIN, FC6_I2S_RX);
|
||||
|
||||
const uint32_t FC6_I2S_WS = (/* Pin is configured as FC6_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC2 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN16 (coords: 87) is configured as FC6_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC6_I2S_WS_PORT, BOARD_INITI2SPINS_FC6_I2S_WS_PIN, FC6_I2S_WS);
|
||||
|
||||
const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SCL_PORT, BOARD_INITI2SPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL);
|
||||
|
||||
const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_FC4_I2C_SDA_PORT, BOARD_INITI2SPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA);
|
||||
|
||||
const uint32_t MCLK = (/* Pin is configured as MCLK */
|
||||
IOCON_PIO_FUNC1 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN31 (coords: 91) is configured as MCLK */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_MCLK_PORT, BOARD_INITI2SPINS_MCLK_PIN, MCLK);
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitACCELPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
||||
invert: disabled, open_drain: disabled}
|
||||
- {pin_num: '58', peripheral: GPIO, signal: 'PIO1, 19', pin_signal: PIO1_19/SCT0_OUT7/CTIMER3_MAT1/SCT_GPI7/FC4_SCK/PLU_OUT1/ACMPVREF, direction: INPUT, mode: inactive,
|
||||
slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitACCELPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M33 (Core #0) */
|
||||
void BOARD_InitACCELPins(void)
|
||||
{
|
||||
/* Enables the clock for the I/O controller.: Enable Clock. */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
/* Enables the clock for the GPIO1 module */
|
||||
CLOCK_EnableClock(kCLOCK_Gpio1);
|
||||
|
||||
gpio_pin_config_t ACCL_INTR_config = {
|
||||
.pinDirection = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO1_19 (pin 58) */
|
||||
GPIO_PinInit(BOARD_INITACCELPINS_ACCL_INTR_GPIO, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, &ACCL_INTR_config);
|
||||
|
||||
const uint32_t ACCL_INTR = (/* Pin is configured as PIO1_19 */
|
||||
IOCON_PIO_FUNC0 |
|
||||
/* No addition pin function */
|
||||
IOCON_PIO_MODE_INACT |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI |
|
||||
/* Analog switch is open (disabled) */
|
||||
IOCON_PIO_ASW_DI);
|
||||
/* PORT1 PIN19 (coords: 58) is configured as PIO1_19 */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, ACCL_INTR);
|
||||
|
||||
const uint32_t FC4_I2C_SCL = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SCL_PORT, BOARD_INITACCELPINS_FC4_I2C_SCL_PIN, FC4_I2C_SCL);
|
||||
|
||||
const uint32_t FC4_I2C_SDA = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PIO_FUNC5 |
|
||||
/* Selects pull-up function */
|
||||
IOCON_PIO_MODE_PULLUP |
|
||||
/* Standard mode, output slew rate control is enabled */
|
||||
IOCON_PIO_SLEW_STANDARD |
|
||||
/* Input function is not inverted */
|
||||
IOCON_PIO_INV_DI |
|
||||
/* Enables digital function */
|
||||
IOCON_PIO_DIGITAL_EN |
|
||||
/* Open drain is disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI);
|
||||
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
||||
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_FC4_I2C_SDA_PORT, BOARD_INITACCELPINS_FC4_I2C_SDA_PIN, FC4_I2C_SDA);
|
||||
}
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
@@ -0,0 +1,393 @@
|
||||
/*
|
||||
* Copyright 2026 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PIN_MUX_H_
|
||||
#define _PIN_MUX_H_
|
||||
|
||||
/*!
|
||||
* @addtogroup pin_mux
|
||||
* @{
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* API
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @brief Calls initialization functions.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootPins(void);
|
||||
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_29 (number 92), P8[2]/U6[13]/FC0_USART_RXD
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 29U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 29U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_30 (number 94), P8[3]/U6[12]/FC0_USART_TXD
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 30U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 30U)
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */
|
||||
#define IOCON_PIO_ASW_DIS_EN 0x00u /*!<@brief Analog switch is closed (enabled), only for A0 version */
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC6 0x06u /*!<@brief Selects pin function 6 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLDOWN 0x10u /*!<@brief Selects pull-down function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO0_11 (number 13), U14[4]/SWDCLK_TRGT
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 11U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 11U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_12 (number 12), U15[4]/D7/P7[2]/IF_SWDIO
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 12U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 12U)
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT
|
||||
@{ */
|
||||
/*!
|
||||
* @brief PORT peripheral base pointer */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT 0U
|
||||
/*!
|
||||
* @brief PORT pin number */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN 10U
|
||||
/*!
|
||||
* @brief PORT pin mask */
|
||||
#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN_MASK (1U << 10U)
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Enables digital function */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u
|
||||
/*!
|
||||
* @brief Selects pin function 7 */
|
||||
#define IOCON_PIO_FUNC7 0x07u
|
||||
/*!
|
||||
* @brief Input function is not inverted */
|
||||
#define IOCON_PIO_INV_DI 0x00u
|
||||
/*!
|
||||
* @brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u
|
||||
/*!
|
||||
* @brief Open drain is disabled */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u
|
||||
/*!
|
||||
* @brief Standard mode, output slew rate control is enabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO0_28_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 7. */
|
||||
#define PIO0_28_FUNC_ALT7 0x07u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO0_28_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_12_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_12_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_12_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_29_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_29_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_29_MODE_PULL_UP 0x02u
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_30_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 4. */
|
||||
#define PIO1_30_FUNC_ALT4 0x04u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_30_MODE_PULL_UP 0x02u
|
||||
|
||||
/*! @name PIO0_22 (number 78), P10[1]/USB0_VBUS
|
||||
@{ */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PIN 22U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITUSBPINS_USB0_VBUS_PIN_MASK (1U << 22U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitUSBPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO0_5_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 0. */
|
||||
#define PIO0_5_FUNC_ALT0 0x00u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO0_5_MODE_PULL_UP 0x02u
|
||||
|
||||
/*! @name PIO0_5 (number 88), S1/J10[1]/U3[12]/P17[8]/P7[7]/U11[4]/P0_5-ISP1
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLEDSPINS_LED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */
|
||||
#define BOARD_INITLEDSPINS_LED_GPIO_PIN_MASK (1U << 5U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITLEDSPINS_LED_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITLEDSPINS_LED_PIN 5U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITLEDSPINS_LED_PIN_MASK (1U << 5U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitLEDsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */
|
||||
#define PIO1_0_DIGIMODE_DIGITAL 0x01u
|
||||
/*!
|
||||
* @brief Selects pin function.: Alternative connection 0. */
|
||||
#define PIO1_0_FUNC_ALT0 0x00u
|
||||
/*!
|
||||
* @brief Selects function mode (on-chip pull-up/pull-down resistor control).: Pull-up. Pull-up resistor enabled. */
|
||||
#define PIO1_0_MODE_PULL_UP 0x02u
|
||||
|
||||
/*! @name PIO1_0 (number 11), U20[2]/SD0_D3
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITBUTTONSPINS_BUTTON_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_BUTTON_GPIO_PIN_MASK (1U << 0U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITBUTTONSPINS_BUTTON_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITBUTTONSPINS_BUTTON_PIN 0U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITBUTTONSPINS_BUTTON_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBUTTONsPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitPins_Core0(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_EN 0x0400u /*!<@brief Analog switch is closed (enabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
|
||||
#define IOCON_PIO_FUNC2 0x02u /*!<@brief Selects pin function 2 */
|
||||
#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */
|
||||
#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_31 (number 91), P19[7]/P19[8]/PLU_IN0/GPIO
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_MCLK_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_MCLK_PIN 31U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_MCLK_PIN_MASK (1U << 31U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_21 (number 76), P17[14]/FC7_I2S_SCK
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_SCK_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_20 (number 74), P17[10]/FC7_I2S_TX
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_TX_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_19 (number 90), P17[12]/FC7_I2S_WS
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN 19U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC7_I2S_WS_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO0_10 (number 21), U14[12]/SWO_TRGT
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PORT 0U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN 10U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_CLK_PIN_MASK (1U << 10U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_13 (number 2), P17[20]/FC6_I2S_RX
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN 13U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_RX_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_16 (number 87), P18[17]/SD1_PWR_EN
|
||||
@{ */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN 16U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITI2SPINS_FC6_I2S_WS_PIN_MASK (1U << 16U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitI2SPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#define IOCON_PIO_ASW_DI 0x00u /*!<@brief Analog switch is open (disabled) */
|
||||
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
|
||||
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
|
||||
#define IOCON_PIO_FUNC5 0x05u /*!<@brief Selects pin function 5 */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
|
||||
#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
|
||||
|
||||
/*! @name PIO1_21 (number 30), P17[3]/P24[6]/FC4_I2C_SDA_ARD
|
||||
@{ */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN 21U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SDA_PIN_MASK (1U << 21U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_20 (number 4), P17[1]/P24[5]/FC4_I2C_SCL_ARD
|
||||
@{ */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN 20U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_FC4_I2C_SCL_PIN_MASK (1U << 20U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*! @name PIO1_19 (number 58), U7[3]/P18[14]/PLU_OUT1/GPIO
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_GPIO GPIO /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_GPIO_PIN_MASK (1U << 19U) /*!<@brief GPIO pin mask */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PORT 1U /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PIN 19U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITACCELPINS_ACCL_INTR_PIN_MASK (1U << 19U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitACCELPins(void); /* Function assigned for the Cortex-M33 (Core #0) */
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @}
|
||||
*/
|
||||
#endif /* _PIN_MUX_H_ */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
File diff suppressed because it is too large.
Load diff
Reference in new issue
Block a user