initial commit

third_party/tinyusb/hw/bsp/rw61x/boards/frdm_rw612/board.cmake

@@ -0,0 +1,30 @@
+set(MCU_VARIANT RW612)
+set(MCU_CORE    RW612)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+set(PYOCD_TARGET rw612eta2i)
+
+set(BOARD_DIR ${SDK_DIR}/boards/frdmrw612)
+
+set(PORT 1)
+
+
+function(update_board BOARD_TARGET)
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    CPU_RW612ETA2I
+    BOARD_TUD_RHPORT=${PORT}
+    BOARD_TUH_RHPORT=${PORT}
+    BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+    BOOT_HEADER_ENABLE=1
+    )
+
+  target_sources(${BOARD_TARGET} PUBLIC
+    ${BOARD_DIR}/flash_config/flash_config.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c
+    )
+
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${BOARD_DIR}/flash_config
+    )
+endfunction()

third_party/tinyusb/hw/bsp/rw61x/boards/frdm_rw612/board.h

@@ -0,0 +1,74 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ * Copyright (c) 2025, Gabriel Koppenstein
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: FRDM-RW612
+   url: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-RW612
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+// LED - Green channel of RGB LED
+#define LED_GPIO              BOARD_INITLEDPINS_LED_GREEN_PERIPHERAL
+#define LED_CLK               kCLOCK_HsGpio0
+#define LED_PIN               BOARD_INITLEDPINS_LED_GREEN_PIN
+#define LED_PORT              BOARD_INITLEDPINS_LED_GREEN_PORT
+#define LED_STATE_ON          0
+
+// WAKE button (Dummy, use unused pin
+#define BUTTON_GPIO           BOARD_INITPINS_WAKEUP_BTN_PERIPHERAL
+#define BUTTON_CLK            kCLOCK_HsGpio0
+#define BUTTON_PIN            BOARD_INITPINS_WAKEUP_BTN_PIN
+#define BUTTON_PORT           BOARD_INITPINS_WAKEUP_BTN_PORT
+#define BUTTON_STATE_ACTIVE   0
+
+// UART
+#define UART_DEV                   USART3
+#define LP_FLEXCOMM_INST           3U
+
+#define BOARD_DEBUG_UART_FRG_CLK \
+    (&(const clock_frg_clk_config_t){3, kCLOCK_FrgPllDiv, 255, 0}) /*!< Select FRG3 mux as frg_pll */
+#define BOARD_DEBUG_UART_CLK_ATTACH kFRG_to_FLEXCOMM3
+
+
+static inline void board_uart_init_clock(void) {
+  /* attach FRG0 clock to FLEXCOMM3/USART3 */
+  CLOCK_SetFRGClock(BOARD_DEBUG_UART_FRG_CLK);
+  CLOCK_AttachClk(BOARD_DEBUG_UART_CLK_ATTACH);
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif

third_party/tinyusb/hw/bsp/rw61x/boards/frdm_rw612/board.mk

@@ -0,0 +1,20 @@
+MCU_VARIANT = RW612
+MCU_CORE = RW612
+
+CPU_CORE = cortex-m33-nodsp-nofp
+CFLAGS += \
+	-DCPU_RW612ETA2I \
+	-DCFG_TUSB_MCU=OPT_MCU_RW61X \
+	-DBOOT_HEADER_ENABLE=1 \
+
+JLINK_DEVICE = ${MCU_VARIANT}
+PYOCD_TARGET = rw612eta2i
+
+SRC_C += \
+	$(SDK_DIR)/boards/frdmrw612/flash_config/flash_config.c \
+
+INC += \
+	$(TOP)/$(SDK_DIR)/boards/frdmrw612/flash_config/ \
+
+# flash using pyocd
+flash: flash-jlink

third_party/tinyusb/hw/bsp/rw61x/boards/frdm_rw612/clock_config.c

@@ -0,0 +1,169 @@
+/*
+ * Copyright 2024,2025 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+/*
+ * How to set up clock using clock driver functions:
+ *
+ * 1. Setup clock sources.
+ *
+ * 2. Set up all selectors to provide selected clocks.
+ *
+ * 3. Set up all dividers.
+ */
+
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v15.0
+processor: RW612
+package_id: RW612ETA2I
+mcu_data: ksdk2_0
+processor_version: 24.12.10
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+#include "fsl_power.h"
+#include "fsl_clock.h"
+#include "clock_config.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: audio_pll_clk.outFreq, value: 4246732800/345600007 MHz}
+- {id: aux0_pll_clk.outFreq, value: 260 MHz}
+- {id: avpll_ch1_clkout.outFreq, value: 4246732800/345600007 MHz}
+- {id: avpll_ch2_clkout.outFreq, value: 1415577600/22118401 MHz}
+- {id: cau_slp_clk.outFreq, value: 4 MHz}
+- {id: clk_32k.outFreq, value: 32 kHz}
+- {id: clk_pmu_sys.outFreq, value: 52 MHz}
+- {id: els_128m_clk.outFreq, value: 128 MHz}
+- {id: els_256m_clk.outFreq, value: 256 MHz}
+- {id: els_64m_clk.outFreq, value: 64 MHz}
+- {id: ffro_clk_div4.outFreq, value: 640/53 MHz}
+- {id: hclk.outFreq, value: 260 MHz}
+- {id: lposc_clk_i.outFreq, value: 1 MHz}
+- {id: main_clk.outFreq, value: 260 MHz}
+- {id: main_pll_clk.outFreq, value: 260 MHz}
+- {id: otp_fuse_32m_clk.outFreq, value: 32 MHz}
+- {id: refclk_phy.outFreq, value: 40 MHz}
+- {id: sfro_clk_i.outFreq, value: 16 MHz}
+- {id: systick_fclk.outFreq, value: 260 MHz}
+- {id: t3pll_mci_256m.outFreq, value: 256 MHz}
+- {id: t3pll_mci_48_60m_irc.outFreq, value: 2560/53 MHz}
+- {id: tcpu_mci_clk.outFreq, value: 260 MHz}
+- {id: tddr_mci_flexspi_clk.outFreq, value: 320 MHz}
+settings:
+- {id: CLKCTL0.MAINCLKSELB.sel, value: CLKCTL0.MAINPLLCLKDIV}
+- {id: CLKCTL0.MAINPLLCLKDIV.scale, value: '1', locked: true}
+- {id: CLKCTL0.PMUFCLKDIV.scale, value: '5', locked: true}
+- {id: CLKCTL0.SYSCPUAHBCLKDIV.scale, value: '1', locked: true}
+- {id: CLKCTL0.SYSTICKFCLKSEL.sel, value: CLKCTL0.SYSTICKFCLKDIV}
+- {id: CLKCTL0.WDT0FCLKSEL.sel, value: NO_CLOCK}
+- {id: CLKCTL1.FRGPLLCLKDIV.scale, value: '13', locked: true}
+- {id: CLKCTL1.OSEVENTFCLKSEL.sel, value: NO_CLOCK}
+- {id: REFCLK_SYS_Config, value: Disabled}
+- {id: SYSCTL2.CH1_M.scale, value: '2621440', locked: true}
+- {id: SYSCTL2.CH1_OFFSET_DIV.scale, value: '345600007', locked: true}
+- {id: SYSCTL2.CH2_M.scale, value: '2621440', locked: true}
+- {id: SYSCTL2.CH2_OFFSET_DIV.scale, value: '66355203', locked: true}
+- {id: SYSCTL2.T3_FBDIV.scale, value: '64', locked: true}
+- {id: SYSCTL2.T3_REFDIV.scale, value: '1', locked: true}
+- {id: T3PLL_MCI_213P3M_Config, value: Disabled}
+- {id: T3PLL_MCI_FLEXSPI_Config, value: Disabled}
+- {id: TCPU_MCI_FLEXSPI_CLK_Config, value: Disabled}
+- {id: TDDR_MCI_ENET_CLK_Config, value: Disabled}
+sources:
+- {id: CAU.XTAL_OSC.outFreq, value: 40 MHz, enabled: true}
+- {id: PMU.XTAL32K.outFreq, value: 32.768 kHz}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_avpll_config_t avpllConfig_BOARD_BootClockRUN =
+    {
+        .ch1Freq = kCLOCK_AvPllChFreq12p288m,     /* AVPLL channel frequency 12.288 MHz */
+        .ch2Freq = kCLOCK_AvPllChFreq64m,         /* AVPLL channel frequency 64 MHz */
+        .enableCali = true,                       /* AVPLL calibration is enabled */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Disable GDET and VSensors */
+    POWER_DisableGDetVSensors();
+    /* Enable CAU sleep clock for PMU */
+    if ((PMU->CAU_SLP_CTRL & PMU_CAU_SLP_CTRL_SOC_SLP_RDY_MASK) == 0U)
+    {
+        /* Enable the CAU sleep clock. */
+        CLOCK_EnableClock(kCLOCK_RefClkCauSlp);
+    }
+    if ((SYSCTL2->SOURCE_CLK_GATE & SYSCTL2_SOURCE_CLK_GATE_REFCLK_SYS_CG_MASK) != 0U)
+    {
+        /* Enable the REFCLK_SYS clock. */
+        CLOCK_EnableClock(kCLOCK_RefClkSys);
+    }
+    /* Initialize T3 PLL and enable outputs that are not clock gated. */
+    CLOCK_InitT3RefClk(kCLOCK_T3MciIrc48m);
+    /* Enable FFRO - T3 PLL 48/60 MHz IRC clock output */
+    CLOCK_EnableClock(kCLOCK_T3PllMciIrcClk);
+    /* Enable T3 PLL 256 MHz clock output */
+    CLOCK_EnableClock(kCLOCK_T3PllMci256mClk);
+    /* Set core clock to safe system oscillator clock for initialization of other sources. */
+    CLOCK_AttachClk(kSYSOSC_to_MAIN_CLK);
+    CLOCK_SetClkDiv(kCLOCK_DivSysCpuAhbClk, 1);
+    /* Enable TCPU PLL MCI clock output */
+    CLOCK_EnableClock(kCLOCK_TcpuMciClk);
+    /* Initialize TDDR PLL and enable outputs that are not clock gated. */
+    CLOCK_InitTddrRefClk(kCLOCK_TddrFlexspiDiv10);
+    /* Enable TDDR PLL FlexSPI clock output */
+    CLOCK_EnableClock(kCLOCK_TddrMciFlexspiClk);
+    /* Initialize AVPLL and enable both channels. */
+    CLOCK_InitAvPll(&avpllConfig_BOARD_BootClockRUN);
+    /* Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kRC32K_to_CLK32K);                 /* Switch CLK32K to RC32K */
+    /*!< Please note SYSTICK_CLK source is used only if the SysTick SYST_CSR register CLKSOURCE bit is set to 0. */
+    CLOCK_AttachClk(kSYSTICK_DIV_to_SYSTICK_CLK);                 /* Switch SYSTICK_CLK to SYSTICK_DIV */
+    /* Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAudioPllClk, 1U);         /* Set .AUDIOPLLCLKDIV divider to value 1 */
+    CLOCK_SetClkDiv(kCLOCK_DivPllFrgClk, 13U);         /* Set .FRGPLLCLKDIV divider to value 13 */
+    CLOCK_SetClkDiv(kCLOCK_DivMainPllClk, 1U);         /* Set .MAINPLLCLKDIV divider to value 1 */
+    CLOCK_SetClkDiv(kCLOCK_DivAux0PllClk, 1U);         /* Set .AUX0PLLCLKDIV divider to value 1 */
+    CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 1U);         /* Set .SYSTICKFCLKDIV divider to value 1 */
+    CLOCK_SetClkDiv(kCLOCK_DivPmuFclk, 5U);         /* Set .PMUFCLKDIV divider to value 5 */
+    /* Select the main clock source for the main system clock (MAINCLKSELA and MAINCLKSELB). */
+    CLOCK_AttachClk(kMAIN_PLL_to_MAIN_CLK);
+    /*!< Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_HCLK;
+}

third_party/tinyusb/hw/bsp/rw61x/boards/frdm_rw612/clock_config.h

@@ -0,0 +1,115 @@
+/*
+ * Copyright 2024 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AUDIO_PLL_CLK              12287999UL     /* Clock consumers of audio_pll_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_AUX0_PLL_CLK               260000000UL    /* Clock consumers of aux0_pll_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_AUX1_PLL_CLK               0UL            /* Clock consumers of aux1_pll_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_AVPLL_CH1_CLKOUT           12287999UL     /* Clock consumers of avpll_ch1_clkout output : N/A */
+#define BOARD_BOOTCLOCKRUN_AVPLL_CH2_CLKOUT           63999997UL     /* Clock consumers of avpll_ch2_clkout output : N/A */
+#define BOARD_BOOTCLOCKRUN_CAU_SLP_CLK                4000000UL      /* Clock consumers of cau_slp_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_CLK_32K                    32000UL        /* Clock consumers of clk_32k output : RTC */
+#define BOARD_BOOTCLOCKRUN_CLK_OUT                    0UL            /* Clock consumers of clk_out output : N/A */
+#define BOARD_BOOTCLOCKRUN_CLK_PMU_SYS                52000000UL     /* Clock consumers of clk_pmu_sys output : PMU */
+#define BOARD_BOOTCLOCKRUN_CTIMER0_FCLK               0UL            /* Clock consumers of ctimer0_fclk output : CTIMER0 */
+#define BOARD_BOOTCLOCKRUN_CTIMER1_FCLK               0UL            /* Clock consumers of ctimer1_fclk output : CTIMER1 */
+#define BOARD_BOOTCLOCKRUN_CTIMER2_FCLK               0UL            /* Clock consumers of ctimer2_fclk output : CTIMER2 */
+#define BOARD_BOOTCLOCKRUN_CTIMER3_FCLK               0UL            /* Clock consumers of ctimer3_fclk output : CTIMER3 */
+#define BOARD_BOOTCLOCKRUN_DMIC_FCLK                  0UL            /* Clock consumers of dmic_fclk output : DMIC0 */
+#define BOARD_BOOTCLOCKRUN_ELS_128M_CLK               128000000UL    /* Clock consumers of els_128m_clk output : ELS */
+#define BOARD_BOOTCLOCKRUN_ELS_256M_CLK               256000000UL    /* Clock consumers of els_256m_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_ELS_64M_CLK                64000000UL     /* Clock consumers of els_64m_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_ELS_FCLK                   0UL            /* Clock consumers of els_fclk output : ELS */
+#define BOARD_BOOTCLOCKRUN_FFRO_CLK_DIV4              12075471UL     /* Clock consumers of ffro_clk_div4 output : N/A */
+#define BOARD_BOOTCLOCKRUN_FLEXCOMM0_FCLK             0UL            /* Clock consumers of flexcomm0_fclk output : FLEXCOMM0 */
+#define BOARD_BOOTCLOCKRUN_FLEXCOMM14_FCLK            0UL            /* Clock consumers of flexcomm14_fclk output : FLEXCOMM14 */
+#define BOARD_BOOTCLOCKRUN_FLEXCOMM1_FCLK             0UL            /* Clock consumers of flexcomm1_fclk output : FLEXCOMM1 */
+#define BOARD_BOOTCLOCKRUN_FLEXCOMM2_FCLK             0UL            /* Clock consumers of flexcomm2_fclk output : FLEXCOMM2 */
+#define BOARD_BOOTCLOCKRUN_FLEXCOMM3_FCLK             0UL            /* Clock consumers of flexcomm3_fclk output : FLEXCOMM3 */
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_FCLK               0UL            /* Clock consumers of flexspi_fclk output : FLEXSPI */
+#define BOARD_BOOTCLOCKRUN_GAU_FCLK                   0UL            /* Clock consumers of gau_fclk output : GAU_ACOMP, GAU_BG, GAU_DAC0, GAU_GPADC0, GAU_GPADC1 */
+#define BOARD_BOOTCLOCKRUN_HCLK                       260000000UL    /* Clock consumers of hclk output : AHB_SECURE_CTRL, APU0, APU1, BLEAPU, BLECTRL, BUCK11, BUCK18, CACHE64_CTRL0, CACHE64_CTRL1, CACHE64_POLSEL0, CACHE64_POLSEL1, CAU, CDOG, CLKCTL0, CLKCTL1, CRC, CTIMER0, CTIMER1, CTIMER2, CTIMER3, DMA0, DMA1, DMIC0, ELS, ENET, FLEXCOMM0, FLEXCOMM1, FLEXCOMM14, FLEXCOMM2, FLEXCOMM3, FLEXSPI, FREQME, GAU_ACOMP, GAU_BG, GAU_DAC0, GAU_GPADC0, GAU_GPADC1, GDMA, GPIO, INPUTMUX, ITRC, LCDIC, MCI_IO_MUX, MRT0, MRT1, OCOTP, OSTIMER, PINT, PKC, PMU, POWERQUAD, PUF, ROMCP, RSTCTL0, RSTCTL1, RTC, SCT0, SDU_FBR_CARD, SDU_FN0_CARD, SDU_FN_CARD, SECGPIO, SENSOR_CTRL, SOCCTRL, SOC_OTP_CTRL, SYSCTL0, SYSCTL1, SYSCTL2, SysTick, TRNG, USBOTG, USIM, UTICK, WLAPU, WLCTRL, WWDT0 */
+#define BOARD_BOOTCLOCKRUN_LCD_FCLK                   0UL            /* Clock consumers of lcd_fclk output : LCDIC */
+#define BOARD_BOOTCLOCKRUN_LPOSC_CLK_I                1000000UL      /* Clock consumers of lposc_clk_i output : N/A */
+#define BOARD_BOOTCLOCKRUN_MAIN_CLK                   260000000UL    /* Clock consumers of main_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_MAIN_PLL_CLK               260000000UL    /* Clock consumers of main_pll_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_MCLK_OUT                   0UL            /* Clock consumers of mclk_out output : N/A */
+#define BOARD_BOOTCLOCKRUN_OSEVENT_FCLK               0UL            /* Clock consumers of osevent_fclk output : OSTIMER */
+#define BOARD_BOOTCLOCKRUN_OTP_FUSE_32M_CLK           32000000UL     /* Clock consumers of otp_fuse_32m_clk output : OCOTP */
+#define BOARD_BOOTCLOCKRUN_REFCLK_PHY                 40000000UL     /* Clock consumers of refclk_phy output : USBOTG */
+#define BOARD_BOOTCLOCKRUN_REFCLK_SYS                 0UL            /* Clock consumers of refclk_sys output : N/A */
+#define BOARD_BOOTCLOCKRUN_SCT_FCLK                   0UL            /* Clock consumers of sct_fclk output : SCT0 */
+#define BOARD_BOOTCLOCKRUN_SFRO_CLK_I                 16000000UL     /* Clock consumers of sfro_clk_i output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYSOSC_CLK_I               0UL            /* Clock consumers of sysosc_clk_i output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYSTICK_FCLK               260000000UL    /* Clock consumers of systick_fclk output : SysTick */
+#define BOARD_BOOTCLOCKRUN_T3PLL_MCI_213P3M           0UL            /* Clock consumers of t3pll_mci_213p3m output : N/A */
+#define BOARD_BOOTCLOCKRUN_T3PLL_MCI_256M             256000000UL    /* Clock consumers of t3pll_mci_256m output : N/A */
+#define BOARD_BOOTCLOCKRUN_T3PLL_MCI_48_60M_IRC       48301886UL     /* Clock consumers of t3pll_mci_48_60m_irc output : N/A */
+#define BOARD_BOOTCLOCKRUN_T3PLL_MCI_FLEXSPI_CLK      0UL            /* Clock consumers of t3pll_mci_flexspi_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_TCPU_MCI_CLK               260000000UL    /* Clock consumers of tcpu_mci_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_TCPU_MCI_FLEXSPI_CLK       0UL            /* Clock consumers of tcpu_mci_flexspi_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_TDDR_MCI_ENET_CLK          0UL            /* Clock consumers of tddr_mci_enet_clk output : ENET */
+#define BOARD_BOOTCLOCKRUN_TDDR_MCI_FLEXSPI_CLK       320000000UL    /* Clock consumers of tddr_mci_flexspi_clk output : N/A */
+#define BOARD_BOOTCLOCKRUN_USIM_FCLK                  0UL            /* Clock consumers of usim_fclk output : USIM */
+#define BOARD_BOOTCLOCKRUN_UTICK_FCLK                 0UL            /* Clock consumers of utick_fclk output : UTICK */
+#define BOARD_BOOTCLOCKRUN_WDT0_FCLK                  0UL            /* Clock consumers of wdt0_fclk output : WWDT0 */
+
+/*! @brief AVPLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_avpll_config_t avpllConfig_BOARD_BootClockRUN;
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+
+#endif /* _CLOCK_CONFIG_H_ */

third_party/tinyusb/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c

@@ -0,0 +1,223 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v17.0
+processor: RW612
+package_id: RW612ETA2I
+mcu_data: ksdk2_0
+processor_version: 25.09.10
+board: FRDM-RW612
+pin_labels:
+- {pin_num: M2, pin_signal: GPIO_11, label: 'J1[6]/WAKEUP_BTN', identifier: WAKEUP;WAKEUP_BTN}
+- {pin_num: L7, pin_signal: GPIO_5, label: 'J1[7]/MCLK', identifier: MCLKOUT}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+#include "fsl_common.h"
+#include "fsl_gpio.h"
+#include "fsl_io_mux.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void)
+{
+    BOARD_InitPins();
+    BOARD_InitDEBUG_UARTPins();
+    BOARD_InitSWD_DEBUGPins();
+    BOARD_InitLEDPins();
+}
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: cm33, enableClock: 'true'}
+- pin_list:
+  - {pin_num: M2, peripheral: GPIO, signal: 'PIO0, 11', pin_signal: GPIO_11, identifier: WAKEUP_BTN, direction: INPUT}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   :
+ *
+ * END ****************************************************************************************************************/
+/* Function assigned for the Cortex-M33 */
+void BOARD_InitPins(void)
+{
+    /* Enables the clock for the GPIO0 module */
+    GPIO_PortInit(GPIO, 0);
+
+    gpio_pin_config_t WAKEUP_BTN_config = {
+        .pinDirection = kGPIO_DigitalInput,
+        .outputLogic = 0U
+    };
+    /* Initialize GPIO functionality on pin PIO0_11 (pin M2)  */
+    GPIO_PinInit(BOARD_INITPINS_WAKEUP_BTN_GPIO, BOARD_INITPINS_WAKEUP_BTN_PORT, BOARD_INITPINS_WAKEUP_BTN_PIN, &WAKEUP_BTN_config);
+}
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitDEBUG_UARTPins:
+- options: {callFromInitBoot: 'true', coreID: cm33, enableClock: 'true'}
+- pin_list:
+  - {pin_num: E5, peripheral: FLEXCOMM3, signal: USART_RXD, pin_signal: GPIO_24}
+  - {pin_num: F6, peripheral: FLEXCOMM3, signal: USART_TXD, pin_signal: GPIO_26}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitDEBUG_UARTPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+/* Function assigned for the Cortex-M33 */
+void BOARD_InitDEBUG_UARTPins(void)
+{
+    /* Initialize FC3_USART_DATA functionality on pin GPIO_24, GPIO_26 (pin E5_F6) */
+    IO_MUX_SetPinMux(IO_MUX_FC3_USART_DATA);
+}
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitSWD_DEBUGPins:
+- options: {callFromInitBoot: 'true', coreID: cm33, enableClock: 'true'}
+- pin_list:
+  - {pin_num: G5, peripheral: SWD, signal: CLK, pin_signal: GPIO_13}
+  - {pin_num: K4, peripheral: SWD, signal: IO, pin_signal: GPIO_14}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitSWD_DEBUGPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+/* Function assigned for the Cortex-M33 */
+void BOARD_InitSWD_DEBUGPins(void)
+{
+
+    MCI_IO_MUX->C_TIMER_IN = ((MCI_IO_MUX->C_TIMER_IN &
+                               /* Mask bits to zero which are setting */
+                               (~(MCI_IO_MUX_C_TIMER_IN_CT_INP3_SEL_MASK | MCI_IO_MUX_C_TIMER_IN_CT_INP4_SEL_MASK)))
+
+                              /* sel GPIO-13 as ct_inp3: 0x00u */
+                              | MCI_IO_MUX_C_TIMER_IN_CT_INP3_SEL(0x00u)
+                              /* sel GPIO-14 as ct_inp4: 0x00u */
+                              | MCI_IO_MUX_C_TIMER_IN_CT_INP4_SEL(0x00u));
+
+    MCI_IO_MUX->C_TIMER_OUT = ((MCI_IO_MUX->C_TIMER_OUT &
+                                /* Mask bits to zero which are setting */
+                                (~(MCI_IO_MUX_C_TIMER_OUT_CT0MAT3_SEL_MASK | MCI_IO_MUX_C_TIMER_OUT_CT1MAT0_SEL_MASK)))
+
+                               /* sel GPIO-13 as ct0mat3: 0x00u */
+                               | MCI_IO_MUX_C_TIMER_OUT_CT0MAT3_SEL(0x00u)
+                               /* sel GPIO-14 as ct1mat0: 0x00u */
+                               | MCI_IO_MUX_C_TIMER_OUT_CT1MAT0_SEL(0x00u));
+
+    MCI_IO_MUX->FC2 =
+        ((MCI_IO_MUX->FC2 &
+          /* Mask bits to zero which are setting */
+          (~(MCI_IO_MUX_FC2_SEL_FC2_I2C_MASK | MCI_IO_MUX_FC2_SEL_FC2_I2S_MASK | MCI_IO_MUX_FC2_SEL_FC2_SPI_MASK | MCI_IO_MUX_FC2_SEL_FC2_I2S_DATA_ONLY_MASK | MCI_IO_MUX_FC2_SEL_FC2_USART_DATA_MASK)))
+
+         /* flexcomm2:select GPIO-13/14 as i2c function: 0x00u */
+         | MCI_IO_MUX_FC2_SEL_FC2_I2C(0x00u)
+         /* flexcomm2:select GPIO-13/14/15 as i2s function: 0x00u */
+         | MCI_IO_MUX_FC2_SEL_FC2_I2S(0x00u)
+         /* flexcomm2:select GPIO-13/14/15/16 as spi function: 0x00u */
+         | MCI_IO_MUX_FC2_SEL_FC2_SPI(0x00u)
+         /* flexcomm2:select GPIO-13 as i2s data function: 0x00u */
+         | MCI_IO_MUX_FC2_SEL_FC2_I2S_DATA_ONLY(0x00u)
+         /* flexcomm2:select GPIO-13/14 as usart rxd/txd: 0x00u */
+         | MCI_IO_MUX_FC2_SEL_FC2_USART_DATA(0x00u));
+
+    MCI_IO_MUX->GPIO_GRP0 = ((MCI_IO_MUX->GPIO_GRP0 &
+                              /* Mask bits to zero which are setting */
+                              (~(MCI_IO_MUX_GPIO_GRP0_SEL_13_MASK | MCI_IO_MUX_GPIO_GRP0_SEL_14_MASK)))
+
+                             /* pio0[31:0] selection, high valid; sel[i]->pio0[i]->GPIO[i]: 0x00u */
+                             | MCI_IO_MUX_GPIO_GRP0_SEL(0x00u));
+
+    SOCCTRL->MCI_IOMUX_EN0 = ((SOCCTRL->MCI_IOMUX_EN0 &
+                               /* Mask bits to zero which are setting */
+                               (~(SOCCIU_MCI_IOMUX_EN0_EN_21_0_13_MASK | SOCCIU_MCI_IOMUX_EN0_EN_21_0_14_MASK)))
+
+                              /* Bitwise enable control for mci_io_mux GPIO[21:0]: 0x00u */
+                              | SOCCIU_MCI_IOMUX_EN0_EN_21_0(0x00u));
+}
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitLEDPins:
+- options: {callFromInitBoot: 'true', coreID: cm33, enableClock: 'true'}
+- pin_list:
+  - {pin_num: M1, peripheral: GPIO, signal: 'PIO0, 0', pin_signal: GPIO_0, direction: OUTPUT, gpio_init_state: 'true'}
+  - {pin_num: N2, peripheral: GPIO, signal: 'PIO0, 1', pin_signal: GPIO_1, direction: OUTPUT, gpio_init_state: 'true'}
+  - {pin_num: N8, peripheral: GPIO, signal: 'PIO0, 12', pin_signal: GPIO_12, direction: OUTPUT, gpio_init_state: 'true'}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitLEDPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+/* Function assigned for the Cortex-M33 */
+void BOARD_InitLEDPins(void)
+{
+    /* Enables the clock for the GPIO0 module */
+    CLOCK_EnableClock(kCLOCK_HsGpio0);
+
+    gpio_pin_config_t LED_BLUE_config = {
+        .pinDirection = kGPIO_DigitalOutput,
+        .outputLogic = 1U
+    };
+    /* Initialize GPIO functionality on pin PIO0_0 (pin M1)  */
+    GPIO_PinInit(BOARD_INITLEDPINS_LED_BLUE_GPIO, BOARD_INITLEDPINS_LED_BLUE_PORT, BOARD_INITLEDPINS_LED_BLUE_PIN, &LED_BLUE_config);
+
+    gpio_pin_config_t LED_RED_config = {
+        .pinDirection = kGPIO_DigitalOutput,
+        .outputLogic = 1U
+    };
+    /* Initialize GPIO functionality on pin PIO0_1 (pin N2)  */
+    GPIO_PinInit(BOARD_INITLEDPINS_LED_RED_GPIO, BOARD_INITLEDPINS_LED_RED_PORT, BOARD_INITLEDPINS_LED_RED_PIN, &LED_RED_config);
+
+    gpio_pin_config_t LED_GREEN_config = {
+        .pinDirection = kGPIO_DigitalOutput,
+        .outputLogic = 1U
+    };
+    /* Initialize GPIO functionality on pin PIO0_12 (pin N8)  */
+    GPIO_PinInit(BOARD_INITLEDPINS_LED_GREEN_GPIO, BOARD_INITLEDPINS_LED_GREEN_PORT, BOARD_INITLEDPINS_LED_GREEN_PIN, &LED_GREEN_config);
+    /* Initialize GPIO0 functionality on pin GPIO_0 (pin M1) */
+    IO_MUX_SetPinMux(IO_MUX_GPIO0);
+    /* Initialize GPIO1 functionality on pin GPIO_1 (pin N2) */
+    IO_MUX_SetPinMux(IO_MUX_GPIO1);
+    /* Initialize GPIO12 functionality on pin GPIO_12 (pin N8) */
+    IO_MUX_SetPinMux(IO_MUX_GPIO12);
+}
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/

third_party/tinyusb/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h

@@ -0,0 +1,146 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/*!
+ * @brief mclk direction control: MCLK is in the output direction. */
+#define MCLKPINDIR_MCLKPINDIR_OUTPUT_DIRECTION 0x01u
+
+/*! @name GPIO_5 (coord L7), J1[7]/MCLK
+  @{ */
+/* Routed pin properties */
+#define BOARD_INITPINS_MCLKOUT_PERIPHERAL CLKCTL1                 /*!<@brief Peripheral name */
+#define BOARD_INITPINS_MCLKOUT_SIGNAL MCLK                        /*!<@brief Signal name */
+#define BOARD_INITPINS_MCLKOUT_GPIO_PIN 5U                        /*!<@brief GPIO pin number */
+#define BOARD_INITPINS_MCLKOUT_PORT 0U                            /*!<@brief PORT number */
+#define BOARD_INITPINS_MCLKOUT_PIN 5U                             /*!<@brief PORT pin number */
+#define BOARD_INITPINS_MCLKOUT_PIN_MASK (1U << 5U)                /*!<@brief PORT pin mask */
+                                                                  /* @} */
+
+/*! @name GPIO_11 (coord M2), J1[6]/WAKEUP_BTN
+  @{ */
+/* Routed pin properties */
+#define BOARD_INITPINS_WAKEUP_BTN_PERIPHERAL GPIO          /*!<@brief Peripheral name */
+#define BOARD_INITPINS_WAKEUP_BTN_SIGNAL PIO0              /*!<@brief Signal name */
+#define BOARD_INITPINS_WAKEUP_BTN_CHANNEL 11               /*!<@brief Signal channel */
+#define BOARD_INITPINS_WAKEUP_BTN_GPIO GPIO                /*!<@brief GPIO peripheral base pointer */
+#define BOARD_INITPINS_WAKEUP_BTN_GPIO_PIN 11U             /*!<@brief GPIO pin number */
+#define BOARD_INITPINS_WAKEUP_BTN_PORT 0U                  /*!<@brief PORT number */
+#define BOARD_INITPINS_WAKEUP_BTN_PIN 11U                  /*!<@brief PORT pin number */
+#define BOARD_INITPINS_WAKEUP_BTN_PIN_MASK (1U << 11U)     /*!<@brief PORT pin mask */
+                                                           /* @} */
+
+/*!
+ * @brief
+ *
+ */
+void BOARD_InitPins(void); /* Function assigned for the Cortex-M33 */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 */
+
+/*!
+ * @brief pio0[31:0] selection, high valid; sel[i]->pio0[i]->GPIO[i] Mask for item 13. */
+#define MCI_IO_MUX_GPIO_GRP0_SEL_13_MASK 0x2000u
+/*!
+ * @brief pio0[31:0] selection, high valid; sel[i]->pio0[i]->GPIO[i] Mask for item 14. */
+#define MCI_IO_MUX_GPIO_GRP0_SEL_14_MASK 0x4000u
+/*!
+ * @brief Bitwise enable control for mci_io_mux GPIO[21:0] Mask for item 13. */
+#define SOCCIU_MCI_IOMUX_EN0_EN_21_0_13_MASK 0x2000u
+/*!
+ * @brief Bitwise enable control for mci_io_mux GPIO[21:0] Mask for item 14. */
+#define SOCCIU_MCI_IOMUX_EN0_EN_21_0_14_MASK 0x4000u
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 */
+
+/*! @name GPIO_0 (coord M1), J1[14]/LED_BLUE
+  @{ */
+/* Routed pin properties */
+#define BOARD_INITLEDPINS_LED_BLUE_PERIPHERAL GPIO                    /*!<@brief Peripheral name */
+#define BOARD_INITLEDPINS_LED_BLUE_SIGNAL PIO0                        /*!<@brief Signal name */
+#define BOARD_INITLEDPINS_LED_BLUE_CHANNEL 0                          /*!<@brief Signal channel */
+#define BOARD_INITLEDPINS_LED_BLUE_GPIO GPIO                          /*!<@brief GPIO peripheral base pointer */
+#define BOARD_INITLEDPINS_LED_BLUE_INIT_GPIO_VALUE 1U                 /*!<@brief GPIO output initial state */
+#define BOARD_INITLEDPINS_LED_BLUE_GPIO_PIN 0U                        /*!<@brief GPIO pin number */
+#define BOARD_INITLEDPINS_LED_BLUE_PORT 0U                            /*!<@brief PORT number */
+#define BOARD_INITLEDPINS_LED_BLUE_PIN 0U                             /*!<@brief PORT pin number */
+#define BOARD_INITLEDPINS_LED_BLUE_PIN_MASK (1U << 0U)                /*!<@brief PORT pin mask */
+                                                                      /* @} */
+
+/*! @name GPIO_1 (coord N2), J5[1]/LED_RED
+  @{ */
+/* Routed pin properties */
+#define BOARD_INITLEDPINS_LED_RED_PERIPHERAL GPIO                    /*!<@brief Peripheral name */
+#define BOARD_INITLEDPINS_LED_RED_SIGNAL PIO0                        /*!<@brief Signal name */
+#define BOARD_INITLEDPINS_LED_RED_CHANNEL 1                          /*!<@brief Signal channel */
+#define BOARD_INITLEDPINS_LED_RED_GPIO GPIO                          /*!<@brief GPIO peripheral base pointer */
+#define BOARD_INITLEDPINS_LED_RED_INIT_GPIO_VALUE 1U                 /*!<@brief GPIO output initial state */
+#define BOARD_INITLEDPINS_LED_RED_GPIO_PIN 1U                        /*!<@brief GPIO pin number */
+#define BOARD_INITLEDPINS_LED_RED_PORT 0U                            /*!<@brief PORT number */
+#define BOARD_INITLEDPINS_LED_RED_PIN 1U                             /*!<@brief PORT pin number */
+#define BOARD_INITLEDPINS_LED_RED_PIN_MASK (1U << 1U)                /*!<@brief PORT pin mask */
+                                                                     /* @} */
+
+/*! @name GPIO_12 (coord N8), LED_GREEN
+  @{ */
+/* Routed pin properties */
+#define BOARD_INITLEDPINS_LED_GREEN_PERIPHERAL GPIO                    /*!<@brief Peripheral name */
+#define BOARD_INITLEDPINS_LED_GREEN_SIGNAL PIO0                        /*!<@brief Signal name */
+#define BOARD_INITLEDPINS_LED_GREEN_CHANNEL 12                         /*!<@brief Signal channel */
+#define BOARD_INITLEDPINS_LED_GREEN_GPIO GPIO                          /*!<@brief GPIO peripheral base pointer */
+#define BOARD_INITLEDPINS_LED_GREEN_INIT_GPIO_VALUE 1U                 /*!<@brief GPIO output initial state */
+#define BOARD_INITLEDPINS_LED_GREEN_GPIO_PIN 12U                       /*!<@brief GPIO pin number */
+#define BOARD_INITLEDPINS_LED_GREEN_PORT 0U                            /*!<@brief PORT number */
+#define BOARD_INITLEDPINS_LED_GREEN_PIN 12U                            /*!<@brief PORT pin number */
+#define BOARD_INITLEDPINS_LED_GREEN_PIN_MASK (1U << 12U)               /*!<@brief PORT pin mask */
+                                                                       /* @} */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitLEDPins(void); /* Function assigned for the Cortex-M33 */
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/