initial commit

third_party/tinyusb/hw/bsp/stm32u0/boards/stm32u083cdk/board.cmake

@@ -0,0 +1,9 @@
+set(MCU_VARIANT stm32u083xx)
+set(JLINK_DEVICE stm32u083mc)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32U083xx
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()

third_party/tinyusb/hw/bsp/stm32u0/boards/stm32u083cdk/board.h

@@ -0,0 +1,127 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: STM32U083C-DK Discovery Kit
+   url: https://www.st.com/en/evaluation-tools/stm32u083c-dk.html
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED - using PA5 (Blue LED from CubeMX)
+#define LED_PORT              GPIOA
+#define LED_PIN               GPIO_PIN_5
+#define LED_STATE_ON          1
+
+// Button - using PC2 (from CubeMX generated code)
+#define BUTTON_PORT           GPIOC
+#define BUTTON_PIN            GPIO_PIN_2
+#define BUTTON_STATE_ACTIVE   0  // Active low (pressed = 0)
+
+// UART - using USART2 on PA2/PA3 (VCP TX/RX from CubeMX)
+#define UART_ID               2
+#define UART_GPIO_PORT        GPIOA
+#define UART_GPIO_AF          GPIO_AF7_USART2
+#define UART_TX_PIN           GPIO_PIN_2
+#define UART_RX_PIN           GPIO_PIN_3
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+static inline void SystemClock_Config(void) {
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_CRSInitTypeDef RCC_CRSInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef  PeriphClkInit = {0};
+
+  /** Configure the main internal regulator output voltage
+  */
+  HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSI48;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
+  RCC_OscInitStruct.PLL.PLLN = 7;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV4;
+  RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1);
+
+  /** Enable the CRS clock
+  */
+  __HAL_RCC_CRS_CLK_ENABLE();
+
+  /** Configures CRS
+  */
+  RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
+  RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
+  RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING;
+  RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000,1000);
+  RCC_CRSInitStruct.ErrorLimitValue = 34;
+  RCC_CRSInitStruct.HSI48CalibrationValue = 32;
+  HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
+  PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+  HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
+  PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+  HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
+}
+
+static inline void board_vbus_sense_init(void)
+{
+  // USB VBUS sensing not required for device-only operation
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

third_party/tinyusb/hw/bsp/stm32u0/boards/stm32u083cdk/board.mk

@@ -0,0 +1,9 @@
+MCU_VARIANT = stm32u083xx
+CFLAGS += \
+  -DSTM32U083xx
+
+# For flash-jlink target
+JLINK_DEVICE = STM32U083MC
+
+# flash target using on-board stlink
+flash: flash-stlink

third_party/tinyusb/hw/bsp/stm32u0/boards/stm32u083nucleo/board.cmake

@@ -0,0 +1,9 @@
+set(MCU_VARIANT stm32u083xx)
+set(JLINK_DEVICE stm32u083rc)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32U083xx
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()

third_party/tinyusb/hw/bsp/stm32u0/boards/stm32u083nucleo/board.h

@@ -0,0 +1,98 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: NUCLEO-U083RC
+   url: https://www.st.com/en/evaluation-tools/nucleo-u083rc.html
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED: PA5 (LD4, Green)
+#define LED_PORT              GPIOA
+#define LED_PIN               GPIO_PIN_5
+#define LED_STATE_ON          1
+
+// Button: PC13 (B1, Blue)
+#define BUTTON_PORT           GPIOC
+#define BUTTON_PIN            GPIO_PIN_13
+#define BUTTON_STATE_ACTIVE   0
+
+// UART: USART2 on PA2/PA3 (VCP via ST-Link)
+#define UART_ID               2
+#define UART_GPIO_PORT        GPIOA
+#define UART_GPIO_AF          GPIO_AF7_USART2
+#define UART_TX_PIN           GPIO_PIN_2
+#define UART_RX_PIN           GPIO_PIN_3
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+static inline void SystemClock_Config(void) {
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
+  RCC_OscInitStruct.PLL.PLLN = 7;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV4;
+  RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                              | RCC_CLOCKTYPE_PCLK1;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
+  PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
+  HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
+}
+
+static inline void board_vbus_sense_init(void) {
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

third_party/tinyusb/hw/bsp/stm32u0/boards/stm32u083nucleo/board.mk

@@ -0,0 +1,9 @@
+MCU_VARIANT = stm32u083xx
+CFLAGS += \
+  -DSTM32U083xx
+
+# For flash-jlink target
+JLINK_DEVICE = STM32U083RC
+
+# flash target using on-board stlink
+flash: flash-stlink

third_party/tinyusb/hw/bsp/stm32u0/boards/stm32u083nucleo/cubemx/cubemx.ioc

@@ -0,0 +1,185 @@
+#MicroXplorer Configuration settings - do not modify
+BSP_IP_NAME=NUCLEO-U083RC
+CAD.formats=[]
+CAD.pinconfig=Dual
+CAD.provider=
+File.Version=6
+GPIO.groupedBy=
+KeepUserPlacement=false
+Mcu.CPN=STM32U083RCT6
+Mcu.Family=STM32U0
+Mcu.IP0=CORTEX_M0+
+Mcu.IP1=NVIC
+Mcu.IP2=PWR
+Mcu.IP3=RCC
+Mcu.IP4=SYS
+Mcu.IP5=USART2
+Mcu.IP6=USB
+Mcu.IP7=NUCLEO-U083RC
+Mcu.IPNb=8
+Mcu.Name=STM32U083RCTx
+Mcu.Package=LQFP64
+Mcu.Pin0=PC14-OSC32_IN
+Mcu.Pin1=PC15-OSC32_OUT
+Mcu.Pin10=VP_PWR_VS_SECSignals
+Mcu.Pin11=VP_SYS_VS_Systick
+Mcu.Pin2=PF0-OSC_IN
+Mcu.Pin3=PF1-OSC_OUT
+Mcu.Pin4=PA2
+Mcu.Pin5=PA3
+Mcu.Pin6=PA11 [PA9]
+Mcu.Pin7=PA12 [PA10]
+Mcu.Pin8=PA13 (SWDIO)
+Mcu.Pin9=PA14 (SWCLK)
+Mcu.PinsNb=12
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32U083RCTx
+MxCube.Version=6.17.0
+MxDb.Version=DB.6.0.170
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_2
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.SysTick_IRQn=true\:3\:0\:false\:false\:true\:false\:true\:false
+PA11\ [PA9].Mode=Device
+PA11\ [PA9].Signal=USB_DM
+PA12\ [PA10].Mode=Device
+PA12\ [PA10].Signal=USB_DP
+PA13\ (SWDIO).GPIOParameters=GPIO_Label
+PA13\ (SWDIO).GPIO_Label=SWDIO
+PA13\ (SWDIO).Locked=true
+PA13\ (SWDIO).Signal=DEBUG_JTMS-SWDIO
+PA14\ (SWCLK).GPIOParameters=GPIO_Label
+PA14\ (SWCLK).GPIO_Label=SWCLK
+PA14\ (SWCLK).Locked=true
+PA14\ (SWCLK).Signal=DEBUG_JTCK-SWCLK
+PA2.GPIOParameters=GPIO_ModeDefaultPP,GPIO_Speed,GPIO_PuPd
+PA2.GPIO_ModeDefaultPP=GPIO_MODE_AF_PP
+PA2.GPIO_PuPd=GPIO_NOPULL
+PA2.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PA2.Locked=true
+PA2.Mode=Asynchronous
+PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_ModeDefaultPP,GPIO_Speed,GPIO_PuPd
+PA3.GPIO_ModeDefaultPP=GPIO_MODE_AF_PP
+PA3.GPIO_PuPd=GPIO_NOPULL
+PA3.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PA3.Locked=true
+PA3.Mode=Asynchronous
+PA3.Signal=USART2_RX
+PC14-OSC32_IN.GPIOParameters=GPIO_Label
+PC14-OSC32_IN.GPIO_Label=OSC32_IN
+PC14-OSC32_IN.Locked=true
+PC14-OSC32_IN.Mode=LSE-External-Oscillator-for-RTC
+PC14-OSC32_IN.Signal=RCC_OSC32_IN
+PC15-OSC32_OUT.GPIOParameters=GPIO_Label
+PC15-OSC32_OUT.GPIO_Label=OSC32_OUT
+PC15-OSC32_OUT.Locked=true
+PC15-OSC32_OUT.Mode=LSE-External-Oscillator-for-RTC
+PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
+PCC.Checker=false
+PCC.Display=Plot\: All Steps
+PCC.Line=STM32U0x3
+PCC.MCU=STM32U083RCTx
+PCC.PartNumber=STM32U083RCTx
+PCC.Series=STM32U0
+PCC.Temperature=25
+PCC.Vdd=3.0
+PF0-OSC_IN.GPIOParameters=GPIO_Label
+PF0-OSC_IN.GPIO_Label=OSC_IN
+PF0-OSC_IN.Locked=true
+PF0-OSC_IN.Signal=RCC_OSC_IN
+PF1-OSC_OUT.GPIOParameters=GPIO_Label
+PF1-OSC_OUT.GPIO_Label=OSC_OUT
+PF1-OSC_OUT.Locked=true
+PF1-OSC_OUT.Signal=RCC_OSC_OUT
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerLinker=GCC
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32U083RCTx
+ProjectManager.FirmwarePackage=STM32Cube FW_U0 V1.3.0
+ProjectManager.FreePins=false
+ProjectManager.FreePinsContext=
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=2
+ProjectManager.MainLocation=Core/Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=cubemx.ioc
+ProjectManager.ProjectName=cubemx
+ProjectManager.ProjectStructure=
+ProjectManager.RegisterCallBack=
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=CMake
+ProjectManager.ToolChainLocation=
+ProjectManager.UAScriptAfterPath=
+ProjectManager.UAScriptBeforePath=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_USB_PCD_Init-USB-false-HAL-true,0-MX_CORTEX_M0+_Init-CORTEX_M0+-false-HAL-true,0-MX_PWR_Init-PWR-false-HAL-true
+RCC.ADCFreq_Value=56000000
+RCC.AHBFreq_Value=56000000
+RCC.APBFreq_Value=56000000
+RCC.APBTimFreq_Value=56000000
+RCC.CortexFreq_Value=56000000
+RCC.FCLKCortexFreq_Value=56000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=56000000
+RCC.HSE_VALUE=4000000
+RCC.HSI48_VALUE=48000000
+RCC.HSI_VALUE=16000000
+RCC.I2C1Freq_Value=56000000
+RCC.I2C3Freq_Value=56000000
+RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APBFreq_Value,APBTimFreq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM3Freq_Value,LPUART1Freq_Value,LPUART2Freq_Value,LPUART3Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MSIClockRangeVal,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQ,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,RNGFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,TIM15Freq_Value,TIM1Freq_Value,USART1Freq_Value,USART2Freq_Value,USBCLockSelection,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value
+RCC.LPTIM1Freq_Value=56000000
+RCC.LPTIM2Freq_Value=56000000
+RCC.LPTIM3Freq_Value=56000000
+RCC.LPUART1Freq_Value=56000000
+RCC.LPUART2Freq_Value=56000000
+RCC.LPUART3Freq_Value=56000000
+RCC.LSCOPinFreq_Value=32000
+RCC.LSI_VALUE=32000
+RCC.MCO1PinFreq_Value=56000000
+RCC.MCO2PinFreq_Value=56000000
+RCC.MSIClockRangeVal=RCC_MSIRANGE_11
+RCC.MSI_VALUE=48000000
+RCC.PLLN=7
+RCC.PLLPoutputFreq_Value=56000000
+RCC.PLLQ=RCC_PLLQ_DIV4
+RCC.PLLQoutputFreq_Value=28000000
+RCC.PLLRCLKFreq_Value=56000000
+RCC.PWRFreq_Value=56000000
+RCC.RNGFreq_Value=48000000
+RCC.SYSCLKFreq_VALUE=56000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.TIM15Freq_Value=56000000
+RCC.TIM1Freq_Value=56000000
+RCC.USART1Freq_Value=56000000
+RCC.USART2Freq_Value=56000000
+RCC.USBCLockSelection=RCC_USBCLKSOURCE_HSI48
+RCC.USBFreq_Value=48000000
+RCC.VCOInputFreq_Value=16000000
+RCC.VCOOutputFreq_Value=112000000
+USART2.IPParameters=VirtualMode-Asynchronous
+USART2.VirtualMode-Asynchronous=VM_ASYNC
+USB.IPParameters=VirtualMode
+USB.VirtualMode=Device_Only
+VP_PWR_VS_SECSignals.Mode=Security/Privilege
+VP_PWR_VS_SECSignals.Signal=PWR_VS_SECSignals
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=NUCLEO-U083RC
+boardIOC=true