CDC Dual Ports
Enumerates as a USB device with two independent CDC virtual serial ports.
What it does
- Exposes two CDC virtual COM ports.
- Echoes back any data received on either port to both ports: the first port echoes as lower case, the second as upper case.
- Sends a UART state notification (toggles the DSR line) on each press of the on-board button.
- Resets the board into the bootloader when the first port is opened at 1200 bps and then disconnected (touch-1200 trigger).
- Blinks the on-board LED: 250 ms when unmounted, 1000 ms when mounted.
USB Descriptors
| Interface | Class driver |
|---|---|
| 0–1 | CDC (virtual serial port 1) |
| 2–3 | CDC (virtual serial port 2) |
Configuration
Notable tusb_config.h settings:
#define CFG_TUD_CDC 2 // two CDC ports
#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64)
#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64)
Building
CMake:
mkdir build && cd build
cmake -DBOARD=raspberry_pi_pico ..
cmake --build .
Make:
make BOARD=raspberry_pi_pico all
Try it
After flashing, two serial ports appear on the host (e.g. /dev/ttyACM0 and /dev/ttyACM1 on Linux). Open either one in a terminal and type: characters come back lower-cased on the first port and upper-cased on the second.