167 lines
5.7 KiB
Markdown
167 lines
5.7 KiB
Markdown
# 0.17.0
|
|
|
|
*September 13, 2024*
|
|
|
|
## General
|
|
|
|
- Improved CI: build both cmake and make. Make use of CircleCI for part of build process to speed up CI
|
|
- Add CodeQL Workflow for Code Security Analysis
|
|
- Add Clang compiler support
|
|
- Add default implementation for weak callbacks functions for better Keil compatibility
|
|
- Upgrade hardware-in-the-loop (HIL) testing with more boards and examples: including dual stack example
|
|
|
|
## Controller Driver (DCD & HCD)
|
|
|
|
### Chipidea
|
|
|
|
- Support MCXA
|
|
|
|
### DWC2
|
|
|
|
- Fix tickless issue with stm32f7: disable ULPI clock during sleep when using internal phy
|
|
- Fix SOF interrupt handling
|
|
- Fix fifo level half/empty issue
|
|
- Add DWC2 Test Mode support.
|
|
- for esp32 force disconnect/connect using USB_WRAP otg pad override
|
|
|
|
### FSDEV
|
|
|
|
- Rewrite and Generalize driver to support non-stm32 mcu such as wch
|
|
- Simplify PMA, HW FIFO access and bit manipulation for different access scheme 1x16, 2x16 and 32 bit
|
|
- Add support for ch32 usbd e.g ch32v203
|
|
- Add support for STM32G4 and STM32U5 microcontrollers.
|
|
- Fix h5 (32-bit) errata 2.15.1: Buffer description table update completes after CTR interrupt triggers
|
|
- ISO EP buffer allocation improvements, implement `dcd_edpt_close_all()`
|
|
|
|
- Fix ch32v203 race condition and stability issue with
|
|
|
|
- fix ch32v203 seems to unconditionally accept ZLP on EP0 OUT.
|
|
- fix v203 race condition between rx bufsize and RX_STAT which cause PMAOVR, occurs with WRITE10
|
|
- correctly handle setup prepare at `dcd_edpt0_status_complete()`, which fixes the race condition with windows where we could miss setup packet (setup bit set, but count = 0)
|
|
|
|
### MAX3421E
|
|
|
|
- Add support for rp2040, esp32 (c3, c6, h2, etc..)
|
|
- Add `hcd_deinit()` for max3421
|
|
- Retry NAK handling next frame to reduce CPU and SPI bus usage
|
|
- add `cpuctl` and `pinctl` to `tuh_configure()` option for max3421
|
|
- Implement hcd abort transfer for Max3421
|
|
- Properly Handle NAK Response in MAX3421E driver: correctly switch and skip writing to 2 FIFOs when NAK received. Otherwise, the driver may hang in certain conditions.
|
|
|
|
### MSP430
|
|
|
|
- support non-bus-powered
|
|
|
|
### MUSB
|
|
|
|
- Add support for Analoog devices: max32650, max32666, max32690, max3278002
|
|
|
|
### nRF
|
|
|
|
- Fix `dcd_edpt_open()` for iso endpoint
|
|
- Handle ISOOUT CRC errors
|
|
- Add compile support with old nordic sdk
|
|
- Fix a few race conditions
|
|
|
|
### OHCI
|
|
|
|
- Allow more than 16 devices
|
|
|
|
### RP2040
|
|
|
|
- Correctly abort control transfer when new setup arrived. Due to RP2040-E2 only able to fix B2 or later
|
|
- Implement hcd abort transfer for rp2040
|
|
- Add support for rp2350
|
|
|
|
### RUSB2
|
|
|
|
- Support ra2a1 pipe number scheme
|
|
|
|
### WCH CH32
|
|
|
|
- Added support for USB OTG/FS and FSDev Driver. Update CH32V307 to allow manual select FS or HS driver.
|
|
- Fixed various bugs in CH32v307 usbhs driver: endpoint handling and data transfer management.
|
|
|
|
## Device Stack
|
|
|
|
- Add `tud_deinit()` and `class driver deinit()` to deinitialize TinyUSB device stack.
|
|
- Add support for generic SOF callback.
|
|
- Add set address recovery time 2ms per USB spec.
|
|
|
|
### Audio
|
|
|
|
- Add audio_test_freertos & audio_4_channel_mic_freertos
|
|
- Improved support for Audio Class 2.0 (UAC2) with various bug fixes.
|
|
- Add feedback by fifo counting.
|
|
|
|
### Bluetooth HCI
|
|
|
|
- Issue ZLP on ACL IN ep when transfer is multiple of endpoint max packet size
|
|
|
|
### CDC
|
|
|
|
- Add `tud_cdc_configure_fifo()` to make RX/TX buffer persistent (not clear when disconnected)
|
|
- Add missing capability bit for CDC ACM serial break support
|
|
- Enhanced CDC class with better handling of large data transmissions.
|
|
- Add missing capability bit for CDC ACM serial break support
|
|
|
|
### HID
|
|
|
|
- Added missing key codes for keypad
|
|
- Added HID Lighting and Illumination functionality
|
|
- Fixed issues in the HID class for more reliable device enumeration.
|
|
- Support HID Mouse with absolute positioning
|
|
- Use separate buffer for control SET_REPORT, fix conflict with interrupt endpoint out
|
|
|
|
### MSC
|
|
|
|
- Added support for SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL
|
|
|
|
### Net
|
|
|
|
- Rewrite of NCM device driver to improve throughput
|
|
- removed obsolete `tud_network_link_state_cb()`
|
|
|
|
### USBTMC
|
|
|
|
- Added notification support
|
|
|
|
### Vendor
|
|
|
|
- Migrate to new endpoint stream API, support non-buffered TX/RX
|
|
- Add ZLP for `write()` when needed
|
|
|
|
### Video
|
|
|
|
- Enhance UVC descriptors and example
|
|
- Video Added support for USB Video Class (UVC) with MJPEG.
|
|
- Fix multiple interfaces, add an example of 2ch video capture.
|
|
- Fix race for `tud_video_n_streaming()` check
|
|
|
|
## Host Stack
|
|
|
|
- Added `tuh_deinit()` to de-initialize TinyUSB host stack.
|
|
- Added support for new USB mass storage class APIs.
|
|
- Improved error handling and retry mechanisms for unstable devices.
|
|
|
|
### CDC Serial
|
|
|
|
- Add support for ch34x
|
|
- Allow to overwrite `CFG_TUH_CDC_FTDI/CP210X/CH32X_VID_PID_LIST`
|
|
- Enhanced stability of CDC-ACM devices during enumeration.
|
|
|
|
### HID
|
|
|
|
- Add `tuh_hid_receive_abort()`
|
|
- Add `tuh_hid_get_report()`
|
|
|
|
### Hub
|
|
|
|
- Prevent status request to invalid ep_num
|
|
- Fix double status xfer
|
|
- unroll hub removal
|
|
|
|
## Contributors
|
|
|
|
Thanks to everyone who contributed to this release: @acscd, @andrewleech, @angmolin, @antoniovazquezblanco, @arntsonl, @b4yuan, @battlesnake, @BrentK-ADI, @camilaodsouza, @cdesjardins, @ChrisDeadman, @clhenry, @cumhuronat, @donatieng, @dp111, @dragonlock2, @duckylotl, @eightycc, @emb4fun, @Erlkoenig90, @feaser, @gschorcht, @hathach, @HiFiPhile, @hinxx, @hjalleboii, @ikskuh, @IngHK, @jerpa77, @jotonedev, @kaidegit, @kasjer, @kaspernyhus, @kilograham, @kkitayam, @Krasutski, @LarssonOliver, @leptun, @liamfraser, @lijunru-hub, @lurch, @Lurcy38, @maflcko, @mamiral, @MatiMcFly, @Okarss, @pigrew, @ra1nb0w, @Rbb666, @rgrr, @Rocky04, @rsolorzanomsft, @Ryzee119, @shuffle2, @slark-yuxj, @tannewt, @thierer, @tinic, @tlyu, @tobozo, @tommie, @trejan, @tyustli, @wjklimek1, @XelaRellum, @Xelus22, @xudongzheng, @YixingShen, @zx96.
|